Question about Flat Panel Televisions

1 Answer

Unable to get my bush tv to accept any code to enable me to use my sky handset to switch tv on off

Bush LCD17TV002 Remote RM-L1703
I have tried every code I can find on the web. Sky can't even help, so I guess it must be something wrong with the T.V. The original remote works well, but the power button is on the blink so I need to replace it. Any ideas, Roger

Posted by on

  • roger1073 Feb 02, 2008

    Thanks a lot leighp, the tin foil worked a treat. One happy wife who can now control her tele again. Still intrigued why the tele will not accept the code to let me use the sky remote.

  • roger1073 Feb 03, 2008

    Thanks Leightp, Roger

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

Hi Roger,rather than paying out for a universal try repairing your own remote first by taking it apart and where the power button is clean it with a damp cloth and also clean the circuit board where the power button is,this sometimes cures the fault,but if the rubber power button itself is worn on the pad side(contact side) another good trick is to put a drop of super glue on the button and quickly attach a small piece of tin foil(same size as the single pad) to the rubber button(underside of course) this almost always works,failing that a universal could be your best bet but try to get an upgradable one.

Posted on Feb 02, 2008

  • leigh pridedle Feb 03, 2008

    No problem Roger glad i could be of assistance,reference the sky remote don't worry to much as it is only has the basic codes and with a lot of later sets they won't touch .

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a bush dled32165hd tv and ny remote has broken a reminder popped up and i am unable yo change back to my sky box from the built in freeview is there anyway to manually press select


There should be a button on the left hand side of the tv.

I can't attach a link properly but the one below takes you to the correct page in the manual. If it doesn't, you need chapter 8.

http://www.manualslib.com/manual/982577/Bush-Led22134fhd.html?page=8#manual

Aug 17, 2016 | Bush Flat Panel Televisions

1 Answer

I would like to find out the TV code for my 55' Bush tv so I can programme my sky TV remote please.


Hi Darren, I have Sky (foxtel) and the Sky box (foxtel box) is hooked up to my television and the only thing is i turn the volume up to full on the television and control everything (volume and change channel) through my Sky(foxtel)remote control..... I hope this helped, CHEERS..

Mar 31, 2016 | Bush Flat Panel Televisions

1 Answer

Need bushtv code for sky remote lc39gl12f


If you have purchased This Tv Bush LC39GL12F from Argos, there is not a code available and Argos do not forsee a code being available in the near future.

I was advised to call Argos Customer service on 0845 6403030 to log a complaint as to no code and eventually a code maybe made available..

NO Good Ringing Argos Tech support, Ring 0845 6403030 Argos Customer Service.

Dec 03, 2012 | Bush Flat Panel Televisions

1 Answer

Sky remote code for bush LC-39GL12F


[0157]. Check this code. It is the code for Bush Brand TV with Skyplus.

Nov 26, 2012 | Flat Panel Televisions

2 Answers

I need a sky remote code for a bush s642f


Hello
Sky remote codes for Bush TV are:

246 263 377 037 064 065 310 300 383 399 391 402 547 292 239 312 609 322 339 515 236 389 035 191 232 245 288 714


Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button
OK

Jun 28, 2011 | Flat Panel Televisions

2 Answers

What code do I need to enable my Sky TV Remote to operate my Bush LTF24M4 Digital LED LCD TV?


http://www.sky.com/helpcentre/tv/remote-controls/operate-tv-with-sky-remote/ all the detail step by step instructions for you are there please let me know if this solved you problem if so thumb me up if not give me more details as what model your remote is

Mar 17, 2011 | Flat Panel Televisions

1 Answer

We cannot change sound using sky remote on our bush s632d television but can change channels do you have a code to reset remote?


the reset code is 9999 for your sky remote and a code you could try for your bush tv is 0206 many thanks

Jan 05, 2011 | Flat Panel Televisions

1 Answer

Sky remote codes for bush a632n


i have the code for bush a632 point remote at tv press tv then red and select till light flashes twice enter code 0145 press tv again press power press select all stored and ready

Sep 01, 2010 | Flat Panel Televisions

2 Answers

Remote Sky+ handset


I systematically tried hundreds of codes and by chance this method worked for me...hope it works for you too! Press TV then hold select and red til LED flashes twice. Enter 3 digit code 253 then press select again. Good luck! Sara

Dec 26, 2008 | Acer AL2671W 26 in. LCD Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...