Question about Hitachi UltraVision CineForm 55VG825 55" HDTV

1 Answer

Problem with red on one side

I have a 52" Hitachi Ultravision HD. I recently did the convergence on it after I moved it and noticed that the red hangs low on one side. The rest of the TV looks great but for about 8" on the right side, the red is lower than the rest of the screen. I'm very confident that I could take care of this myself if I know what to look for. Any help is appreciated!!

Thanks
Mike

Posted by on

  • Lawlesss13 Feb 02, 2008

    The Convergence on my tv is only the crosshair looking adjustment. It's not divided into quadrants on the cenvergence adjustment. Is there an adjustment inside the TV?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

All you have to get to the convergence area to adjust that quadrant thats bad

Posted on Feb 01, 2008

  • Cary Farah
    Cary Farah Feb 04, 2008

    im not sure... some did some didn't you would need a service manual to tell you which control was for what.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hitachi UltraVision HDTV won't turn on. The


Convergence has failed. $250 - 300 let a trained tech. do it for you.

Mar 16, 2010 | Hitachi UltraVision CineForm 55VG825 55"...

2 Answers

I have a hitachi ultravision and the blue is off center.


your convergances amps ics have failed and need to be replaced alone with the 2 burnt resistors you will find then run magic focus

Nov 30, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Convergence problem


http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

You can download the manual here. Insrtuctions for auomatic convergence are described. I copied the instructions below.

Automatic Convergence
Your HD Monitor’s picture tubes might have been disturbed during delivery or
after you moved the HD Monitor, causing the color in your HD Monitor to be
out of alignment. The colors adjust by starting auto convergence.
IMPORTANT: Auto convergence works best once the HD Monitor has
warmed up for at least an hour. If you've just unpacked your HD Monitor,
it's a good idea to repeat the Auto convergence function when the
HD Monitor's been running for at least an hour. See page 38 for more
information about Auto convergence.
1. Press OK to begin auto convergence.
2. When the auto convergence is complete, the Red center convergence menu
appears. The cross in the middle of the screen should be yellow. If it is not,
use the arrow buttons to move the red cross to overlap the green cross.
Press OK when adjustments are complete.
3. The Blue center convergence menu appears with a cyan cross in the middle
of the screen. If it is not, use the arrow

Sep 23, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Hitachi 46f500 convergence?


a common problem wich i also have with convergence with blue and red convergence.
the image converge amplifiers are burnet out wich in turn blow out resisters that control individual color convergence.

Jun 19, 2008 | Hitachi 46F500 46" Rear Projection...

1 Answer

Hitachi UltraVision has blue streak on right side of screen.


convergent systems.. I callled Hitachi....

it cost $600 to relpace the part... all 3 colors red yellow blue,.... tech took the part out and will replace it in about 3 or 4 days.

I was told by technician that it was a very very good tV in fact he said he would buy it from me for $300 and take it away.. I am considering that ... but a new one with Picture in picuture will be 2000 or more

Apr 06, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

52 hitachi ultravision


Yes, you can search these threads for the answer or ctechnicians.com

Jan 02, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

No Red in the picture


Could be faulty red socket along w/ ballast. You need tech to see this.

Dec 15, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Hitachi Tv


KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 22, 2007 | Hitachi 53FDX20B 53" Rear Projection...

Not finding what you are looking for?
Hitachi UltraVision CineForm 55VG825 55" HDTV Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...