Question about Insignia IS-DVD1001 DVD Recorder/VCR

1 Answer

50 inch insignia plasma

Turn the tv on and the green light flashes for about a minute, finally comes on with no picture, then takes repeatedly pushing power button on the tv to turn tv off. then push power, it comes on and everything is ok. does this 3 out of 5 times turning the tv on. tv is less than 2 months old, they can't repair or replace because they don't have them anymore. has real bad picture burn in also, don't get one!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,003 Answers

THIS BRAND OF TV IS NOT REALLY RELIABLE AS IT IS ECONOMICAL YOU SEEM TO HAVE A POWER SUPPLY PROBLEM MOST LIKELY A POWER CONTROL BOARD ISSUE .

IT WILL BE MORE ECONOMICAL TO PURCHASE A BETTER BRAND NAME TV AS THE INSIGNIA BRAND PRODUCT IS ECONOMICAL PARTS ARENT AVAILABLE.

Posted on Feb 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DVD Player will not power on. Power Indicator Light flashes repeatedly.


Plug out the device,Open the outer shell or strip the outer shell take a hair dryer heat up the board slightly until it feels slightly warm then plug in and switch on and remove disc.Then put outer shell back and fasten screws that where removed.

Jan 06, 2014 | Sony DVP-CX860 Multi-disc DVD Player

1 Answer

Need to know how to finalize recorded disc so that it can be played in regular dvd player


You can record and finalize DVD+Rs one time. After you fill a DVD+R or

complete all the recordings you want on a single DVD+R, finalize it.

Otherwise, the DVD+R will play only on this Recorder.To play the Disc on

other DVD Players, you must finalize it first.

Once you finalize a DVD+R, you cannot record on it anymore or make

editing changes.Therefore, make sure the Disc is as you want it before you

finalize it.

1



Press SYSTEM MENU. Press

; to select in the top left

corner of the menu bar at the top of the TV screen.

2



Press CH-

9 repeatedly to select in the second screen,

then press



:.

3



Press CH-

9 repeatedly to select Finalize disc. Finalize disc

appears in the menu only when an unfinalized DVD+R is in the

Recorder.

4



Press OK.

"Finalizing" will appear in the menu.The process may

take a few minutes.


When finalization is complete, the Index

picture screen will reappear.

You cannot unfinalize a DVD+R, and you cannot record or

edit the DVD+R after you finalize it.

A DVD+R will play on other DVD Players only after the
Disc is finalized.

Mar 22, 2011 | Philips DVDR75 DVD Recorder

1 Answer

I need remote codes to program my directv control to my bd p-1500 blu ray dvd


hi,
Try any one of the following code.
20490, 20573, 20820, 21075, 20899

Progarmminig procedure

The AV1 and AV2 switch position can be used to program a

VCR, DVD, STEREO, 2nd DIRECTV Receiver or 2nd TV with

the following instructions.

1. Turn on the component (e.g. DVD Player) you wish to

program.

3. Move the slide switch under the AV1 (or AV2) icon.


4. Press and hold the MUTE and SELECT keys at the same

time until the green light under AV1 (or AV2) flashes

twice and then release both keys.

5. Using the number keys enter the 5-digit code for your

brand of component being programmed. If performed

correctly the green light under TV will flash twice.

6. Aim the remote at your component and press the power

key once. The component should turn off. If it does not

turn off, repeat steps 3 and 4 trying each code for your

brand until you find the correct code.

7. Repeat steps 1 through 6 to program a new component

under AV2 (or AV1).


ok

Feb 21, 2011 | Samsung BD-P1200 Blu-Ray Disc Player

1 Answer

Panasonic th-42pw6 plasma TV switches itself off intermittently


i think the power ic needs a replacement.
the possition is ic551 and is named strf6668

Apr 06, 2010 | Televison & Video

2 Answers

Screen goes black.


I would say an inverter problem, you will need to have a qualified tech. do the repair. Julio milleniumtvsvc@gmail.com

Jul 22, 2009 | Insignia IS-PDVD10 Portable DVD Player

1 Answer

I have a 42 inch sabre tv that wil now come on, but...


My advice would be to go back inside and look for bad solder joints first.

Jul 12, 2009 | Panasonic DMR-EZ47V DVD Recorder/VCR

3 Answers

Turning on


I second quavuama. I had the same symptoms after my four-year-old "broke" it. He actually figured it out and suggested the fix. He said "Daddy, the little button is stuck..." OK, yeah right, I said. But he pointed to the small auto shut-off button just above the source and setup buttons. When the lid closes the button is pushed down and off goes the picture. Well little four-year-old fingers was fingering the button and it got stuck in the down position. I used a sharp tip to work it back to the "sprung" position. Picture now comes on.

Mar 13, 2008 | Insignia NS-PDVD8 Portable DVD Player

1 Answer

Insignia NS-7PDVD portable DVD player - no picture


The unit is failing and is not worth repairing. There is either a short in the wiring that leads to the screen, the inverter board os failing, or the decoder is failing. These are all hardware problems.

There are several tests to find where the problem may be, but the average consumer doesn't have the ability or access to parts to fix these issues.

Sep 22, 2007 | Insignia NS-7PDVD

2 Answers

Insignia PD10135 Portable DVD Player Battery won't work


I have the same unit, and had the same problem numerous times. I finally removed the battery and sprayed CRC electronic cleaner over the battery terminals as well as the units terminals. Put the battery back in hooked up the charger and it went green. It is playing as I write this.

Apr 05, 2007 | Insignia PD10135 Portable DVD Player

Not finding what you are looking for?
Insignia IS-DVD1001 DVD Recorder/VCR Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Cindy Wells

Level 3 Expert

4798 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...