My nokia E611 back ground light is so dim I can hardly read the numbers also I can receive text messages but can not send out messages

Usually to receive texts or send texts check with your network Operator as there is a text message Centre Number. Make sure that that is the same message Centre number you are using in message settings is same as provided by your Network Provider

check your message center number, if changed contact your service provider for the message center number :)

Hi,

You cannot send messages because the message centre number stored in your mobile may be wrong.

Please enter the correct message centre number. To get the correct message centre number please call your service provider and they will provide you the number.

Menu > Messaging >Options >Settings > Text message >Message centres

Thank You

Check your message settings, there is a option called Message center number.If the number is incorrect you wont able to send messages while you can receive messages.This Message center number is provided by your service provider.Call your customer care for message center number and enter it to your phone and save in message center number box.Then you should send the messages.

for sending text messages :
1. call to your network operator customer care
2. request the message center number...
3.note it down
4. go to message settings>message center number
5. insert the number which is noted by you and save it
this solves your messaging problem ...
Good luck

Just Switch off and switch on your mobile. if the problem remain, contact your network operator(customer care).

Thank you

if you have nokia symbion phone so formate it and any brand you have for that you need to check sim center number or reset the phone

Hi,
check your message centre number..If its edited or deleted..u cant send or receive any messages..contact your operator for tat number..

enter this code *#7370#...for wd2 phone... if your phone is a dct4 nokia phone it has to be formatted in a specially made box for repairing nokia phone

well restore to factory settings and it will work i had the same problem , but before save all numbers to mem card or  else you will lose all ya numbers