- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Which password? ISP password or Router password? If it is a router login password, then simply press Reset button which is very small usually located behind the router (near your lan port) & reconfigure your modem. & if it is an ISP password then contact your isp & request to reser your password.
Your Router / Gateway is an 802.11g device, capable of 54mbps on the wireless connection. The USB connection, is limited by the port on the computer that it is plugged into (USB1.0 is 1mb, USB1.1 is 10Mb, USB2.0 is 450mb). If your data service is limited to 10mb, then that will be as fast as the ports will be able to get data. It would be a limitation of your data connection, not the hardware.
You will probably need to buy a wireless card for your desktop - most desktop computers do not have a wireless card when you buy them. If you do have a wireless card installed, try refreshing the connection, making your home connection a trusted/auto-connect connection and downloading a new version of the hardware driver for your wireless card. You will no have wireless internet on your desktop. please rate my solution
First thing that you have to do is to check if the wireless light on your linksys wrt150N is lit. If it is, then that means that it is emitting wireless signal so you can connect wirelessly.
Then, install your verizon usb mobile broadband card on your desktop. When you plug it to the usb port, a pop up balloon would show on your page which would say FOUND NEW HARDWARE. you could click on it and choose the CD-drive to install OR you can run the cd and have it install on itself.
After installing the usb, try to connect to your wireless network. Start > Connect to > and then click on the name of your wireless network.