I have Windows XP - I am trying to add my HP PSC 1350 printer but when I use the Wizard, it is not one of those listed and I don't have a disk

HP "series" numbering can be somewhat confusing, but Windows 7 does have the correct driver for your printer.
For the HP PSC 1350, you will need to use the 1300 series driver.

The 1310 series driver is for models numbered 131x (e.g., 1315, 1318).

it is very possible that because you have another hp printer active with that computer, and the software from the new hp printer may be conflicting with the software already installed into that computer, and becuase of that, the computer automatically drops the new installation of the software from the new printer, just like it never happened, in almost any case, you will have to uninstall the whole software program from the other printer already installed into that computer, and install the new software into your computer, if that still doesnt work, then your new printers software, the new printer, or both are not compatable with your computer

OK, sorry to hear about your trouble with the All-N-1
If your are looking for the software needed for your unit, you can find them at HP.com

If you have the All-N-1 hooked up, you will need to disconnect it while installing the program.
Later, as the program loads, it will ask you to power on unit and plug in USB connection.

The entire process may take as long as 20 minutes from start to finish.
P.S. if you have a 1350, your load will be for a 1300 series unit.
If you are using XP, or VISTA, make sure you a installing the correct driver.

Hope this information has been of help to you.

Readers, please rate your technicians.
Thank you,
John Ray
[email protected]

Surwe. just download and install the vista driver from the HP website for your model.
Link provided:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us〈=en&product=323006&

I cannot speak for the author or 3rd partys who may have been involved in the alteration or creation of this beta driver. It says that it's an HP Beta driver for x64, and it seems to be working fine for me on XP x64. My system did not find any virus's or spyware, and it is downloadable from cnet downloads which is usually a pretty reliable source for spyware free and virus free downloads. After much aggravation and a re-visit to past cussing sessions with clenched fists at the infinite money grubbing moronic attitdue of the big companies (like HP and Epson) who want you to buy a new device so they don't write the drivers you need for your existing and perfectly usable device, I came across this beta driver and gave it a chance. So far it seems to allow my PSC 1350 all in one to print flawlessly on XP x64! WHOO HOO!

HP can @#$%$#@! (this being the 5th or 6th go around with no drivers for an HP device that works fine on XP32, Vista 32 & 64, but not XP x64 (XP x64 being the most stable operating system MS has developed to date, I find it hard to understand why it's become the re headed step child). I'll never purchase another HP printer. (I fought this one desperately since it's a brand new printer that was given to me as a gift.)

anyway, enough spouting off, here's the link to the driver! ENJOY!

http://download.cnet.com/x64Drv5-64-0-17-exe/3000-2116_4-184036.html

you should try HP site for upadted driver for vista.
Here is the link

Thanks

there arew drivers for vista, follow the link below, select yuor printer, select vista as OS and download the files you need
http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=hp+psc+1350


Good luck

please visit the link bellow and you can find the all drivers to windows vista

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=306888&lc=en&cc=us&dlc=en&lang=en&cc=us

hp.com, click drivers and downloads, then enter the model number then download and install your drivers using the add printer wizard, have disk tab. good luck!

i cannot re-install my hp 1350 all in one scanner. i have uninstall and re-install the printer driver was unknown. how can that be possible even i dont have the cd that comes with it.