Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

Service Mode I can't get to the SERVICE MODE! I have had several people in my office try following the instructions emailed to me and nobody can do it! It can't be THAT hard!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 41 Answers

Mp150
Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Posted on Feb 09, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need to down load software for mp150 printer

Posted on Feb 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i can clear ERROR: E002-0000 on ir 2204 - Office Equipment & Supplies


Solution previously provided on FIXYA. At the top of web page of FIXYA, there is a box Search problems & products.

The solution is as follows:

Service Mode Entry
1. Press the User Mode key. (Looks like a little man head. Some people call it the function or additional function key.)
2. Press 2 and 8 on the keypad at the same time.
3. Press the User Mode key on the control panel.
If done correctly the display will read
COPIER
FEEDER
SORTER
FAX
BOARD
Press the Copier Icon
Press the Function Icon
Press the Clear Icon
Press the Err Icon
To exit service mode : Press the Reset key twice to end service mode and return to the User screen

HOW TO RESET CANON IR 2204 ERROR E002 0000 Canon Office Equipment Supplies

Feb 23, 2018 | Canon Office Equipment & Supplies

1 Answer

CANON PIXMA G2400 WON'T ENTER SERVICE MODE


Hi. If you do the procedure correctly. That means that main board is defective

Jan 31, 2018 | Canon PIXMA Office Equipment & Supplies

2 Answers

Cannon 2002n E355-0005 error


Hi

Please follow the below procedure to enter Service Mode
1. In standby mode, press the "Settings/Registration" key.
2. Press the "Reset" key.
3. Press the "Back" key.
4. Press the "Settings / Registration" key.
5. The service mode screen is displayed.
Use the "Back" key to exit Service Mode

COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power.

Still have an error after following that steps, please call at 1800-204-4427. I can solve you out.

Dec 17, 2016 | Cannon Office Equipment & Supplies

1 Answer

MX410 paper jam without paper jam


Either there is a small fragment of paper still hidden in the carriage somewhere, or the sensor is defective. If you can't seem to locate the problem, it would be best to contact Canon directly and ask technical service for assistance.

Jan 11, 2018 | Canon Pixma MX410 All-In-One Printer

1 Answer

I have a code E000013-0001 code showing on Canon 6055i copier


Its on the rear bottom right, I believe there is two screws, remove the panel and take out the bottle and empty it. After replacing the waste toner case or removing the waste toner from the case, clear the toner counter in service mode as follows:

To get into service mode, hit additional functions[*] 2&8 follow by additional functions[*] again. [Select [COPIER> Counter> MISC> WST-TNR], press "C" (Clear key) to clear the counter, and turn the power OFF/ON.

You can also change the detection level as follows:

The waste toner detection timing is determined by the total page counts specified in service mode below:

1. Page counts until the warning message is indicated
2. Page counts between the warning message and E013 indication
Field Remedy

Follow the steps below if you want to change these page counts:
1. Page counts until the warning message is indicated
In service mode [COPIER> Adjust> MISC> WT-FL-LM], select any number from "0" through "4".
0: 80,000 / 1: 140,000 / 2: 210,000 (default) / 3: 320,000 / 4: 460,000

2. Page counts between the warning message and E013 indication
In service mode [COPIER> Adjust> MISC> WT-ER-LV], select any number from "0" though "3".
0: 1 / 1: 20,000 / 2: 40,000 (default) / 3: 60,000

Apr 24, 2013 | Canon IMAGERUNNER 6570 Copier

1 Answer

We have a service agreement on several printers. It's time to get the meter readings.How do you access and print out the print count/statistics log on a Hp LaserJet4Plus?


The following procedure is used to initiate the Service Mode.
1 Hold down the [Menu+] and [Value+] keys while powering ON the printer. Hold the keys down until SERVICE MODE is displayed.
2 The interrupted power-on self test is resumed. If the test completes successfully, the message SERVICE MODE is displayed.


1 Enter the Service Mode as described previously.
2 When SERVICE MODE is displayed, press the [MENU] key to access the Service Menu. Press the [ITEM] key to step through the menu.
3 PAGES=XXXXXX is displayed. XXXXXX represents the page count currently stored in the printer's NVRAM. The underlined character denotes the cursor position.

Jul 29, 2011 | HP LaserJet 4 plus Printer

1 Answer

Getting error E3


3E == overcurrent detected at the motor.

Open the control panel, there you will find a tech sheet that explains how to put the machine into service mode and what to do while in service mode to track this down. Once on service mode, you can cycle through and retrieve all diagnostic codes. You will also find serveral other diagnostic service notes. Read them and follow the instructions to test the motor, motor control, and main control board. Hope this helps.

Jul 16, 2009 | Maytag Neptune Washer

1 Answer

I need to retrive the key operator code for a Aficio 1060/1075. How do I do this?


You cannot restore the key operator code for the Aficio 1060/1075. You can delete the code and then write new one .
Follow the instructions and will be easy.
1. enter the service mode.
2. To enter the service mode press one after other the follow keys on the control panel of the copier.
press the yellow key [ Cancel Modes] than press the number one after other [1]-[0]-[7] on the number keypad of the copier and than press and hold the red key [ Clear \ Stop] until on the touch screen do not appear the service menu after the service menu will appear press on the touch screen [Copy Sp] up in the right corner has a touch key [sp direct] press that key and press the follow numbers on the number keypad which are 7810 and then press "#' on the number keypad.
on the screen will appear "execute" press the touch button and than by pressing
"exit" several times you will exit from the service mode.
NOTE: "PLEASE DO NOT TOUCH NOTHING ELSE IN THIS MODE IF YOU ARE NOT A SERVICE TECHNICIAN BECAUSE BY PRESSING SOMETHING YOU MAKE SOME ERROR OR OTHER PROBLEM"
After clearing the key operator code you may enter new one.

If you need something else please ask

PLEASE RATE ME

Jul 15, 2009 | Office Equipment & Supplies

3 Answers

Aficio 1035


Not sure what SC818 is as not in my manuals please try the following.

Entering and Exiting SP mode
1. Press the Clear Mode key.
2. Use the keypad to enter “107”.
3. Hold down Clear/Stop for at least 3 seconds.
4. Enter the Service Mode.
To enter the Normal Service Mode:
Copy SP On the touch-panel, press Copy SP.


Once in the service mode turn the main switch off located on the left hand side of the machine wait 5-10 seconds then switch back on. This should get the machine working. Hope this helps
PLEASE DO NOT ADJUST ANYTHING ELSE WITHIN SERVICE MODE AS CAN DAMAGE MACHINE OPERATION)

Thanks J

Dec 24, 2007 | Ricoh Aficio 1035 Copier

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2170 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...