Question about Canon PIXMA MP810 All-In-One InkJet Printer

Open Question

MP810 Scanner How do I change the lamp used by the scanner?

Posted by on

4 Suggested Answers

ginko
  • 19396 Answers

SOURCE: Scanner driver problems for MP810

If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS
.....
After downloading is finished, unplug the USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Some Canon device may not be Vista compatible and cannot work on Vista.

Posted on Dec 04, 2008

YourZEN
  • 820 Answers

SOURCE: How to trace and release scanner lock

Hello,

There's a lock switch, left side near the scanning glass.
Lift the cover ( 1 ) and
switch the lock switch to the open padlock indicator ( 2 )


36edb34.jpg
For online support on the MP810, look here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp810

Posted on Jul 22, 2010

  • 77 Answers

SOURCE: where on the canon printer mp810 is the scanner

already answered this....

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp810#BrochuresAndManuals

look for setup manual......
it is apparently under the top cover near the glass

Posted on Jan 11, 2011

  • 628 Answers

SOURCE: The lamp on my Canon MP600 scanner/copier has

It may be difficult obtaining a bulb, but you can remove the glass cover and remove the bulb. Go to a place where they service Canon copiers and see if they can get one for you. However it may not be cost effective, considering the cost of printers these days.

Posted on Feb 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I have a Canon MP810 printer and the screen shows there is an error with that number: 5020. It says that I have to unlock the locker of the scanner and then restart. I have done it many times...


I have just read it on the other forum..try this one
Error Code 5020:
Scanner lock switch locked. [5020] Release the scanner lock switch and turn the power
off and back on.
Turn the machine off, unlock the scanner lock
switch, then turn the machine on again.

Hope it helps.

Sep 09, 2011 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

The scanning feature is not working on my Canon MP810. After I place the document on the platen glass I am unable to proceed any further with the process. The printer does not seem to recognise it when I...


Kindly install the scanner software for printer the driver software cd just re install it will install the scanner software and make sure in device manger there is not other usb device listed if it is there just remove it. And refresh it in will automatically install the driver.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

Sep 09, 2011 | Canon PIXMA MP810 All-In-One InkJet...

2 Answers

My canon printer mf4020 display system error e225 on the printer display. what can i do?


E225 means you need to replace the scanner lamp.Unzip the scanner and change the scanner lamp.If a have been useful please give me a vote :).Thanks

Apr 14, 2011 | Canon i-SENSYS MF4140 All-In-One Laser...

1 Answer

How to trace and release scanner lock on Canon MP810 printer


Hello,

There's a lock switch, left side near the scanning glass.
Lift the cover ( 1 ) and
switch the lock switch to the open padlock indicator ( 2 )


36edb34.jpg
For online support on the MP810, look here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp810

Jul 22, 2010 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

How do you scan 120 negs?


The MP600 cannot scan film or slides. Film/slide scanners need a light source to shine through the film to the scanner sensor. You can use a flat bed scanner with a light source such as the CanoScan 5600F, or a multifunction unit equipped with a backlight source such as the Canon PIXMA MP810, MP970 or MP980.

May 19, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

CANON PIXMA MP810 PROBLEMS - Aghhhhh!! I can


Try this,

scan the document to the computer, then view it using a picture viewer.

You may see that the scan is faulty!

The printer may be printing exactly what it sees!

Mar 07, 2010 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Error 5020 scanner lock switch will not turn off.I am using printer pixma mp810


Does anyone know how to fix error 5020 release the scanner lock switch and turn the power off & on.The Cannon MP810 Printer. Please Help!Thanks

Dec 07, 2008 | Printers & Copiers

1 Answer

Scanner driver problems for MP810


If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS
.....
After downloading is finished, unplug the USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Some Canon device may not be Vista compatible and cannot work on Vista.

Oct 30, 2007 | Canon PIXMA MP810 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...