Question about Casio EXILIM Card EX-S770 Digital Camera

Open Question

Frontech e-cam problem disconnected

Hi i have frontech e-cam when i plug in to pc disconnected problem. how it solv?

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I can see nothing from my web cam, it so blurred, my webcam nodel no is Frontech Gen Jil2225

I have a similar webcam. The black lens on the front can be twisted to move it in or out to adjust the focus. It might be little stiff at first. try holding a tissue and turning the front lens with your fingers.

Feb 20, 2011 | Cameras

1 Answer

I bought the Frontech Diamond webcam and installed the CD and the message shows its successfully installed, as its requested i restarted my system. After i open my cam,, the light will ON but in the CAM...

check if your USB cable is properly plugged.
Also try connecting your webcam directly to your PC instead of through a USB hub

if your webcam's image is not sharp, check to see if it has a focus ring. A blurry image can sometimes simply mean the webcam is not in focus. Adjusting the focus through the ring can solve that problem.

Other picture quality problems with webcams can be addressed by changing the video capture properties for the webcam. Most programs that can use a webcam will have an option to access the properties of the video source, which will bring up the video capture properties window.


Feb 13, 2011 | Cameras

1 Answer

How can i install web cam without its driver CD? it's frontech e-cam model no.:JIL-2225

You can install your Webcam by searching and downloading the right drivers form WEB. That`s the only way without a CD. Windows doesn't have the suitable driver for your device.

Nov 03, 2010 | Cameras

1 Answer

Frontech e-cam driver software

try to do a small surfing on google you will find one

Jan 19, 2010 | Cameras

1 Answer

Can you use the aiptek mega cam like a web cam?

Yes you can. Here's what worked for me.

First disconnect your camera.

Uninstall your existing software.
Download new software from Unzip.

Remove any batteries.
Set switch to 'On'
Set Mode to Video
When software installation is complete, plug in camera to PC with USB cable supplied.
Run installed program on PC. The Mega camera screen will appear. Click on 'Live'. Your camera picture should appear on the screen.

Oct 06, 2009 | Aiptek Mini PenCam Digital Camera

1 Answer

Will not recognise casio camera QV 5000SX other progs ok

Hi there and welcom to FixYa.

Check the connection to the pc. Is it loose? Make sure the cable is pushed in all the way. If it is,
Turn the camera off and disconnect it from the pc. Restart the pc.
After the pc reboots, reconnect the cable and turn the camera on.

Hope that helps.


Feb 25, 2009 | Casio Cameras

1 Answer

My pc won't pick up my cam...i

Did you install the SOFTWARE that came with the Camera BEFORE you plugged in the camera? If not, you will need to disconnect the camera, reboot the PC, install the software and then connect the camera. If the camera is connnected before the software install you won't have the proper drivers for it to work.
THanks //D

May 27, 2008 | Vivitar ViviCam 3710 Digital Camera

4 Answers

Problem installing my FRONTECH e-CAM JIL 2216

Hi sandysms, go to start ->settings -> controlpanel -> system -> hardware -> devicemanager . see if there is yellow Exclamation marked the device . click on that click uninstall. then click scanfor hardware changes. your camera wil be automatically Detected by windows. and make sure driver installed properly you can download driver from www. and check for ur computer USB2 support.

Nov 06, 2007 | Cameras

3 Answers

Need a driver for PC-CAM 350

Comment by mimhb, posted on Feb 20, 2008 my PC-CAM 350 purchased on 2005 at the beging it was worked well and recently I upgraded my PC due to virus, after that I don't have that Orginal installation CD for PC-cam 350 because it was missedplaced, also there is more problem in that pc cam showing in error messege and some numbers are displaying in the screen, when connect to the PC it camara screen dispaying NO. 15, and I try to Make Photo or Video its not working, please help me what is the problem and how to solve this problem as soon as possible. thanks

Sep 12, 2005 | Creative Labs PC-Cam 350 Digital Camera

Not finding what you are looking for?
Casio EXILIM  Card EX-S770 Digital Camera Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Cameras Experts


Level 3 Expert

98816 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Fred Block
Fred Block

Level 2 Expert

289 Answers

Are you a Casio Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides