Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima WT9 60

My ultima washer just stopped mid cycle. no lights on machine at all. checked fuse and plug socket and they are ok. is there an internal fuse

Posted by on

  • Anonymous Feb 16, 2008

    flashingf18

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The internal circuit board has come loose, switch off power take the top off and tighten the connections on the plugs inside

Posted on Mar 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint ultima WDD960, My washer dryer has stopped mid wash cycle annd is displayinh F:o5


  • F05 - Pressure switch jammed on full - Check pump for blackages.
  • The best thing is to see if it is filling and draining properly

Oct 28, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My hotpoint ultima dryer has no power to it changed fuse checked plug socket emptied water tank cleaned both filters


power comes in at mains lead goes to the choke /filter from here onto the door interlock switch then onto timer ......hope this helps

Feb 26, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washing machine stopped working,no power,no display checked fuse,fuse ok.hotpoint wt761


Check the power outlet, the plug and the cable or with the appropriate tester see if you have mains power where the power cable connects to the machine wiring.

Jan 30, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My Hotpoint ultima WT721 1200 spin keeps tripping out all plug sockets. Have changed fuse but still does it. What could it please?


hello, bad earth check all the wired connection to the washer if these are ok then check your socket wires make sure wires are tight if these ok then there may be fault inside the washer power supply hope it helps

regards
shaun

Jan 15, 2011 | Hotpoint Washing Machines

2 Answers

Washing machine wont work at all


Obviously the first thing to check is that the socket is supplying power by plugging another appliance in such as a lamp. It is less likely to be the socket but you'd be daft not to check it out before calling an engineer as it does occasionally turn out to be a faulty wall socket. This is only necessary though if there are no led indicator lights lit up on your washer as any light that's on shows that the machine is getting a live and neutral supply from the socket.
The second thing to check is the fuse in the plug. Either put the fuse into something else and check the appliance still works or try another fuse that you know to be OK in the washer. Make sure you use a 13 amp fuse and never by-pass a fuse! If both of those are OK, then the most common cause for a washing machine that wont start is the door interlock, particularly if the mains lights on the washing machine has come on, but nothing works. However, the fault could also be in wiring to the door interlock or even the door catch not activating it properly, or the on off switch or the main control module. With some Indesit and Hotpoint washing machines even an open circuit heater or motor can cause the entire washing machine to stop working except the led lights.
You need to know what you are doing to trace this type of fault so if it isn't the wall socket or the plug you'd be better getting an engineer to trace it. Do not work on a live washing machine. Engineers should use a continuity test meter to trace faults with the washing machine unplugged and never test with a live washing machine.

Mar 19, 2010 | Washing Machines

1 Answer

Machine stopped mid cycle with water still inside and the panel is saying FO/5


F05 means you have a pressure switch fault, check the pressure chamber or pipe also the wiring from the switch. For more Hotpoint, Creda or Idesit error code definitions use this link

Mar 18, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima WD860 machine has stopped mid cycle displaying f-04 I have taken the panel off the back and cleared out the tube from the drum by removinng the clip but this has not worked. On thurning the...


f04 is a pressure switc problem.
take the lid off and check the clear plastic hose is attached to the bottom of the pressure switch, a round part with wiresand the other end to the sumps breather tube.if it is and there are no holes or splits in the tube it may need replacing.

Feb 18, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint washer/dryer aqaurius stopd mid cycle with message F-01


f01 is a motor short circuit. you will probably need a new one and maybe the circuit board that powers it if all the lights went out unless the fuse is gone.

Jan 28, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint WD64 No power - help please !


hi from n/west uk from the symptoms you describe ? that you have no lights on machine? this is most definately total power loss to machine so if you are certain? the fuse is ok? next is has the wire/lead from plug chaffed or damaged breaking the supply? this next possibility may sound odd but the socket you plug machine into ? may be faulty ie the damp location at rear of machine could have caused deteriation of socket terminals or wires even the wire may have broken/come loose? have had this happen in homes and caused by wires not secured properly and eventually arcing/ resulting in power fail at socket ? may i suggest try another elec appliance ie lamp/hoover/ iron? to check if socket is operating just to eliminate? also if the socket is a fused type? make sure this fuse is ok too? finally have you checked consumer unit for possible seperately fused/trip out for the machine use socket ? hope this helps find fault best wishes

Oct 26, 2008 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...