Question about RCA HD52W58 52" TV

2 Answers

Powers on and then right back off

The green light comes on for four or five seconds you can hear the picture try to come on and then shuts off and repeats twice more. What do i need to do to fix this problem is a rca hd52w58 52"

Posted by on

  • 10 more comments 
  • jettjimmy Mar 20, 2008

    For a couple of weeks now my TV when I turn it on the want come in and it powers right back off.

  • Anonymous May 09, 2008

    the green light comes on for four or five seconds you can hear the picture try to come on and then shuts off and repeats twice more. What do i need to do to fix this problem is a rca hd52w58 52"

  • scottdash8 Sep 07, 2008

    I have a Hitachi That does the exact same thing...

  • mbsfinest267 Sep 27, 2008

    i have the rca 52" hdtv and it does the same thing comes on like 3 times and nothing

  • bubblechick Sep 29, 2008

    my 52 inch rca tv was acting funny the last few days. It is only about 4 years old. Yesterday it was turning on and off by itself, and this morning it turned off and i was unable to turn it back on. I tried unpluging it from the wall and still nothing. I was wondering can you tell me the problem with my tv?

  • shanabowers Sep 30, 2008

    same as others

  • greg431207 Oct 09, 2008

    I was told that a lamp needs to be replaced when reading the and verified by a repair shop. But I can't find the lamp. And the manual is out of date. It does not reflect the correct drawing where to locate the lamp. I took off the rear panel and the front panel. No glory, and frustrated.

  • Anonymous Mar 18, 2009

    i have the same problom can any one help me with this problom if u can send it to my email////// brucemushtare@yahoo.com

  • Marmaduke220 Mar 30, 2009

    I have had my RCA TV for about 2 years and for the last 6 months it has sat in my living room without turning on. Hit the power button the green light comes on for 4 or 5 seconds then blinks 4 or 5 times and goes off. At first you could hear the TV trying to kick on now it doesn't do anything. I have been told by RCA that I will have to pay over $500 to replace the bulb. I am looking for other suggestion before I pay over half of the total cost of the TV to repair it! Help?

  • reppinei Mar 30, 2009

    our 52" hdtv rca tv will not turn on. when you hit the power button the green light comes on and then off, then it does this two more times before shutting off. it will not turn on, can you please help me??? please send information to my email REPPINEI@aol.com

  • greg431207 May 11, 2010

    gregt19 - what are you saying?

  • greg431207 May 11, 2010

    What are the filters you suggest cleaning. I saw r g b lamps, ckt boards a large mirror. Can you give some description what the filter should look like, and i'll look for it. Thanks in advance. Greg.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

50 inch rca hd

Posted on Oct 30, 2008

Try and clean the two filters on the tv this should be the first thing to do.

Posted on Feb 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power Problems


Try leaving it unplugged overnight. It is possible it needs to discharge. If that doesn't work, I'd say you either have a bad switch, or a bad power supply. Hopefully the switch, because that's much easier to fix. Can you bridge the switch connectors with a wire? If it doesn't come on and stay on when you do that, it's a power supply issue (and not nearly as simple to fix).

Sep 03, 2007 | Mitsubishi VS-55707 TV

2 Answers

When you turn on power you hear a click and the green light turns on. Three seconds later you hear another click and the green light turns off.


MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:

UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ONFOR A MOMENT AND GOES OFF.

PRESS AND HOLD "device"(input) and"menu" buttons on front of tv for at least 5 seconds and then release bothtogether.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protectthe Convergence IC or IC's is blown---set will detect no voltage to convergenceIC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES ANDTHEN TO GET IT TO REPEAT MORE YOUHAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

let me know what you find--hope that you find 2 blinks, a pause and twoblinks--this is the most common and easiest to fix.

Let me know what you find and I will assist you.

SD TECH

Aug 31, 2011 | Mitsubishi WS-55807 TV

1 Answer

When the TV is powered up, it shuts off in two to five seconds.


DO THIS: when set comes on and goes off (green power light) On the front of the set press and hold BOTH THE MENU AND INPUT BUTTONS IN TOGETHER FOR AT LEAST 5 SECONDS AND RELEASE BOTH BUTTONS.

Power light should blink a two digit error code like 2,2, a pause and repeat it up to a total of five times.

Let me know what error code and I will tell you what it means.

If this told you something you did not know, rate this solution as very helpful as I do this here for free.

SD TECH

Aug 16, 2010 | Mitsubishi VS-45609 TV

1 Answer

Why wont my mitsubishi big screen tv turn on? the green light comes on but then shuts right back off.


Model number given indicates it should be a 2000 year model.

If so, it should have the self check feature; try to turn the set on and when the green light goes off: On the front of the set press and hold both the menu and input buttons for at least five seconds and then release both buttons.

Power light will blink a two digit error code like: 2 blinks,pause and 2 blinks (2,2 error code is most common one). It will repeat the error code several times.

Let me know what error code you find and I will tell you what it may mean.

if this told you something you did not know rate this solution as "very helpful" as I do this here for free.

You can post a comment on this page.

Regards, SD TECH

Aug 11, 2010 | Mitsubishi VS-60607 TV

1 Answer

Sony grand wega turns off & o ever 30sec flashes green light


it's a power failure.try to replace the regulator in power supply board.

Sep 04, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

HD52W19 TV


have the same problem, some kinda coolant leaks and fries the drive I was told...

May 30, 2008 | RCA HD52W58 52" TV

4 Answers

Sony kv32fs16 problem


The STANDBY light is flashing on the television and there is no picture or sound. Solution
sp.gif sp.gif The STANDBY light will flash if an issue is detected within the television. This can sometimes be resolved by simply following the steps below to reset the television.
  1. Turn off the television. IMPORTANT: For a projection television that uses an internal lamp, wait 5 minutes after turning off the television to allow the lamp to cool before continuing with the following steps.
  2. Unplug the television power cord from the electrical outlet.
  3. Let the television remain without power for 60 seconds.
  4. Plug the power cord back into the electrical outlet. NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
  5. Turn on the television.
If the issue is still unresolved after following all of the troubleshooting steps, service may be required. Please note the number of times the STANDBY light flashes and relay that information to the service center.

Nov 02, 2007 | Sony FD Trinitron WEGA KV-29LS35 29" TV

2 Answers

WHY WONT IT COME ON?!?!?!?


If you would like us to help you, you must tell us what brand and model TV you have.

Aug 28, 2007 | Televison & Video

Not finding what you are looking for?
RCA HD52W58 52" TV Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...