Question about Projection Televisions

1 Answer

No picture ge 52 inch hdtv........plug it in....green lite flashes 3 sets of 3. i have looked for a fuse.....dont see one please help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 47 Answers

Does the set turn on i.e do you get any sound ?
There is a inline fuse inside the unit near the power pack.

Posted on Feb 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ge 42 inch rear projection tv. The colors are crossed and I was wondering if this is bnecause of the lenses out of alignment? if so, how can I adjust it? there is no setting for alignment.


It is possible, that the type of connection you have to your TV are crossed.

With COMPONENT cables, you have 3 plugs, red green and blue.

If this is the case, correct the plugs location to the correct plug.

Lens alignment results in a fuzzy (diffused) picture.

outside of that I too am at a loss.

good luck and don't forget to vote!!!

Sep 28, 2010 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

52 inch rca projection tv turn tv on and there are horizontal


Go to menu then setup look for convergence if you Do NOt see convergence then you have a open fuse FL231 Located on right side of FBT there is 3 in a roll small brown rectrangle looking caps but they are Fuses it will be in the one in the middle.

Aug 18, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Hey guys please help another Fixya expert w/52''ge projection tv


Replace CP150 and the HOT transistor and that should take care of it. CP150 is most likely the cause

Jan 24, 2009 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

RCA 52 INCH CONVERGENCE PROBLEM HELP/already replaced the fl231 fuse


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find a fix here
bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Nov 01, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

1995 rca 52 inch tv...


Please post the model number of your RCA as usually its a bad flyback and start up capacitor when you get a 3 blink error code . But I can help you better if I have the model number of your set.

Oct 24, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

52 inch RCA - green light turns on & off, BUT no picture


CP150 is a capacitor in the power supply circuit....feel top to
see if flat....change if "pooched" or swollen..................T.

Apr 15, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

52 inch rca tv


the set is in safety shutdown. When the processer detectecs a problem it shuts it down. This is where the troubleshooting begins. First uplug the set for 30 min then plug back up. I dont think i have ever seen this work but it where to start. THe fact that u got a flashing lightn means the main fuse is still good. a tchnician can read error codes that the processor has generated to help troubleshoot it. unless your a tech this is most of what u can do.

Feb 25, 2008 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...