I just bought a used 2001 jetta gls, but the previous owner only had the valet key. What do I need to do to get a keyless remote/key made?

Fuel Air sensor is the most likely cause, but can be other things.

P1151 Error Code ' VW Vortex - Volkswagen Forum

https://www.vwvortex.com > ... > Golf IV & Jetta IV
Aug 6, 2014 - Can't pass my emissions inspection with my check engine light on. Code is P1151. Possible causes: MAF Sensor, O2 Sensor, Vacuum leak.
Missing: DOC ‎' Must include: DOC

pm151: i hve 2003 jeta VR6..engine light..fuel air - JustAnswer

https://www.justanswer.com > ... > Volkswagen Questions
Sept 11, 2009 - I have 2003 Jetta VR6 and the engine light is on and have a code reading of P1151 fuel air managing how can I trouble - Answered by a ...
1 answer · 17559/P1151/004433 - Long Term Fuel Trim Additive Air; Bank 1; Range 1: System too Lean The ECM is trying to compensate for an excessively lean mixture. ...

2001 Jetta GLS VR6 CEL Code P1151 ' VW Forum

https://www.vwforum.com > ... > MK4
Jul 5, 2009 - error code P1151 "bank1,Long Term Fuel Trim, Range 1 leanness Lower Limit Exceeded". Explanation - fuel pressure or volume. Probable cause
Missing: 2.8 ‎DOC

p1151 code My 2001 vw jetta glx vr6 has a p1151 code. What

https://www.fixya.com > ... > Volkswagen
Nov 16, 2019 - p1151 code My 2001 vw jetta glx vr6 has a p1151 code. What is the problem I need to fix? - Volkswagen Cars & Trucks question.
I m geting an engine alarm and the code is P1151 . - Fixya
Nov 19, 2019
2003 Jetta GLI throwing P1151 Indicating a lean condition
Sept 2, 2019
SOLVED: I need the Serpentine belt diagram for a 2009 - Fixya
Apr 17, 2021
I need torque specs 14B coaster bus.cyl head and - Fixya
Apr 14, 2017
More results from www.fixya.com Missing: DOC ‎' Must include: DOC

2001 Jetta GLS VR6 CEL Code P1151 - Volkswagen Forum

https://volkswagenforum.com > forum > 2001-jetta-gls-...
error code P1151 "bank1,Long Term Fuel Trim, Range 1 leanness Lower Limit Exceeded". Explanation - fuel pressure or volume. Probable cause. Check engine for ...
Missing: GLX ‎2.8 ‎DOC

P1151 code and white smoke on idle - The VR6 Owners Club

https://www.vr6oc.com > ... > Newbies Corner
Mar 14, 2020 - Hi, i just recently bought a 2002 vw jetta vr6 24v with 123000 miles on it. Car runs good and sounds healthy but just here recently ive been ...

If you mean the valet key, no. I use that key frequently in my 2001 TDI.
Only the ignition switch has a receiver to identify the chip in the key fobs but the valet key has the chip also.

Sounds like the chip in the key is not allowing the security system to allow the car to start. You may need a new key from the dealer.

Great I'm glad to hear you got it fixed. I was Leaning towards that solution but you got it figured out. As far as key fobs killing batteries, I do not have a solution to that yet. I have the same problem and have had with all of my Jetta's. If I figure it out I will let you know. Good luck and I hope the best for you.

KEY WORDS to search for are
2003+VOLKSWAGEN+remote+receiver...

or "keyless+module"

I only got hits back from eBay (& AMAZON)...
which would indicate this is a fairly ROBUST part...
(TYPICALLY: really popular parts = high failure rate).
((in my opinion))


No direct (part number) hits...!!


Look here... Appears to be inside the center console
(surmised without proper documentation)

Looks like
VW VOLKSWAGEN OEM Phaeton Keyless Entry Receiver for Key Fob Remote...

also...
VW VOLKSWAGEN OEM Phaeton Keyless Entry Receiver for Key Fob Remote...

Possibly AMAZON... (use your own module number)
EXAMPLE
Amazon com 2003 jetta keyless module

Hope I am helping...

Carnac the Magnificent

it could be that he locked the car with the key and activated the car alarm try unlocking it with the remote and see if that works

Needs new drivers door lock actuator (P/N 3B1-837-015-AS)

Okay, here goes-

1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.
3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.

Thanks for using Fixya, please rate if this helps :)

You Need Vas5051 Or Vag-com Equipment To Programe It

THE DEALER SHOULD BE ABLE TO TELL YOU BY THE VIN NUMBER IF THE CAE CAME WITH A FACTORY KEYLESS ENTERY THAN YOU CAN BUY THE REMOTE PAD AND PROGRAM IT