Question about Dell 922 All-In-One InkJet Printer

4 Answers

Booklet layout I'm using a Dell 922 All-in-One printer. I want to print a Word document as a booklet using the option in 'Properties' > 'Print layourt' > 'booklet'. Everything works fine EXCEPT that at the end of the day you have to fold the paper on the right not the left to get the pages in order. Any ideas?

Posted by on

  • Traffic Jan 31, 2008

    Each page of the Word document prints as half of the hard copy so you have to fold the A4 piece of paper to get an A5 booklet.

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

Is page on printing on the left hand side or right hand side?
<a rel='nofollow' href="http://stashbox.org/77137/printing.png">http://stashbox.org/77137/printing.png</a>
<img src="http://stashbox.org/77137/printing.png">

Posted on Jan 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

here is the manual go through it carefully i am sure u will find the solution.
Click here

If u still get any problems then ask me..

Good luck,
Don't forget to rate me as fixya..

Posted on Jan 31, 2008

  • Priya darshan Jan 31, 2008

    You need to have adobe acrobat reader to view the manual in pdf format.
    Click here to download it if u don't have..

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 201 Answers

Hey there traffic, check this out.
http://office.microsoft.com/en-us/word/HP030729491033.aspx
it should give you the options neede to fix your problem. If the link doesn't work ,just copy and paste. Good Luck!

Posted on Jan 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,067 Answers

Http://www2.yc.edu/content/its/desktopservices/Documents/922.pdf

cheak out the manel here talks about booklets

Posted on Jan 31, 2008

  • 1 more comment 
  • nick helpap
    nick helpap Jan 31, 2008

    also do u have all the latest driver and software and updates to office in print from left to right or rightto left in preferecne

  • nick helpap
    nick helpap Jan 31, 2008

    When you select Book fold for your page setup, Microsoft Word prints two pages on one side of the paper. When you fold the paper, it opens like a book. This option is intended for documents that have more than two pages.


    1. Set up your document as a booklet.
      How?

      When you create a booklet, it's best to start with a new, blank document so that you have better control over the placement of text, graphics, and other elements. You can add a book fold to an existing document, but you may have to reposition some elements once the book fold is in place.


      1. Start a new, blank document.
      2. On the File menu, click Page Setup, and then click the Margins tab.
      3. In the Multiple pages list, select Book fold.
        If your document is not set to landscape orientation, Microsoft Word sets it to landscape.

      4. In the Inside and Outside boxes, type or select the amount of space you want for the inside and outside margins (margin: The blank space outside the printing area on a page.).
        If you need even more space along the fold to accommodate binding, type or select the amount of space you want in the Gutter box.

      5. In the Sheets per booklet list, select the number of pages you want to include in a single booklet.
        If the number of pages in the document exceeds the number of pages you select for a booklet, Word prints the document as multiple booklets.

      6. Select any other options you want in the Page Setup dialog box.
      7. Add text, graphics, headers or footers (header and footer: A header, which can consist of text or graphics, appears at the top of every page in a section. A footer appears at the bottom of every page. Headers and footers often contain page numbers, chapter titles, dates, and author names.), and other elements to your document as usual.

    2. On the File menu, click Print.

    3. Set options for printing on both sides of the paper.

      If you're using a duplex printer (one that automatically prints on both sides of the paper)

      Click Properties, and then set the options you want. If you have a choice of setting the page orientation and duplex options, select landscape orientation, and flip the document on the short edge or short side.

      If you aren't using a duplex printer

      In the Print dialog box, select the Manual duplex check box. Word will print all of the pages that appear on one side of the paper, and then prompt you to turn the stack over and feed the pages again.

    4. Select the page range you want to print.
      If you click Current page or Pages, Word prints the page you indicate, plus the three other pages that belong on the same sheet of paper.

      If you click Selection, Word prints your selection using the default page layout instead of booklet layout.

  • nick helpap
    nick helpap Jan 31, 2008

    please rate the best one i posted 1st thx

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to print on both side of lexmark 8350


Print Properties is the software that controls the printing function when the printer is connected to a
computer. You can change the settings in Print Properties based on the type of project you want to create.
You can open Print Properties from almost any program:
All of the print settings are on the three main tabs of the Print Properties software: Quality/Copies, Paper Setup, and Print Layout.

1 With a document open, click File, then Print.
2 From the Print dialog, click Properties, Preferences, Options, or Setup.
3 Within Print LAyout you can chooses to print on both sides of the paper and select a duplexing preference.

Sep 01, 2011 | Lexmark X8350 InkJet Printer

2 Answers

When printing a duplex booklet, the printout is reduced in size with larger margins than in original document. How can I get it to print regular size?


It happens when the documents is on A4 size and the printer is set to print on letter size (which is smaller in size). Hence the printer automatically resizes the prints which result in larger margins and print as compared to the actual document.
Therefore, when you print the documents (Press Ctrl+P) you have to select the paper (A4) from the print properties.

Hope it helps! Good Luck!
CreativeTECH

Mar 02, 2011 | Brother MFC-9840CDW Laser Printer

1 Answer

I got a new toshiba lap top and installed my printer to the lap top. the printer connects to my lap top and everything. But when I try to print...it does not print and says zero documents pending. HELP...


Right click on printer and take its properties, and click on advance tab. from there you will see options. spool print documents, kindly select print directly to printer.


Enjoy

Apr 16, 2010 | Dell 922 All-In-One InkJet Printer

1 Answer

How do I duplex print on Lexmark x6170


Good day! Try to follow these steps on how to do duplex printing using the Print Properties settings. With a document open, click File, Print. In the Print dialog, click Properties (or Preferences, or Options, or Setup) button. The Print Properties screen appears. You'll see three main menus: Quality/Copies, Paper Setup and Print Layout. In Print Layout, select Duplexing to print on both sides of the paper. Hope this helps.

Mar 17, 2010 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

Dell 922 printer will only print the last page of a three page document


In your software, choose "Print Preview" from the Print menu and verify that the entire document is there. If so, be sure that you are choosing to print all pages.

Nov 29, 2009 | Dell 922 All-In-One InkJet Printer

1 Answer

Printing a booklet on WorkCentre 7345 , need help argent !!!


OK, same problem, I've gotten through the solution. I can print and have the first page and last page on one side of the large sheet and the two inside pages on the other side, so that is foldable into a booklet.
I start with a 4 page (US letter sized) document I wish to print as a booklet on tabloid paper.
In the (page layout or editing program's) print dialogue, I've said print all pages, set it at 1 page per sheet, then clicked the printer properties button to open the Xerox Workcenter 7345PS option dialogue.
In the Xerox dialog on the "Paper/Output" tab, selected the larger (Tabloid, 11x17" in my case) paper size, selected 2-Sided Print. Then I select the "Layout/Watermark" tab and clicked the Booklet Layout radio button, chose "Landscape" for the Page Layout Option. Note: I saved these settings as "Tabloid Booklet" by clicking the down-arrow to the right of "Driver Defaults" so that I could select them and not have to dial in every one of the settings whilst experimenting.

Apr 11, 2008 | Xerox Office Equipment & Supplies

1 Answer

Mirror image


Printing Iron-on Transfers
Load the iron-on transfers.

With your document open, click File, then Print. The Print dialog box appears.

In the Print dialog box, click Properties, Preferences (or Options).

Select a print quality:
In the Print Properties dialog box, click the Quality/Copies tab.
From the Quality/Speed area, select Normal or Better.

Select a paper type:
In the Print Properties dialog box, click the Paper Setup tab.
From the Type area, select Iron-on Transfer.

If your software program does not have mirror or iron-on settings, select a print layout:
In the Print Properties dialog box, click the Print Layout tab.
From the Layout area, select Mirror.
Click OK.

To print your iron-on transfers, click OK.

NOTE: To prevent smudging, remove each iron-on transfer as it exits the printer and then let it dry before stacking.

Mar 29, 2008 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Can't print landscape?


Make sure the correct printer driver is installed.Check your user guide.Read the information below.

Printer Settings
You can use the printer properties window, which allows you to
access all of the printer options you need when using your
printer. When the printer properties are displayed, you can
review and change the settings needed for your print job.
Your printer properties window may differ, depending on your
operating system. This Software User’s Guide shows the
Properties window for Windows 98.
Your printer driver Properties window that appears in this User’s
Guide may differ depending on the printer in use.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your
Windows User’s Guide) and the Printer tab (see “Printer Tab” on
page 10).
NOTES:
• Most Windows applications will override settings you specify
in the printer driver. Change all print settings available in the
software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes
permanent, make them in the Printers folder.
• The following procedure is for Windows XP. For other
Windows OS, refer to the corresponding Windows User's
Guide or online help.
1. Click the Windows Start button.
2. Select Printers and Faxes.
3. Select your printer driver icon.
4. Right-click on the printer driver icon and select
Printing Preferences.
5. Change the settings on each tab, click OK.

Layout Tab
The Layout tab provides options to adjust how the document
appears on the printed page. The Layout Options includes
Multiple Pages per Side and Poster. See “Printing a
Document” on page 6 for more information on accessing printer
properties.
Orientation
Orientation allows you to select the direction in which
information is printed on a page.
• Portrait prints across the width of the page, letter style.
• Landscape prints across the length of the page, spreadsheet
style.
• Rotate allows you to rotate the page the selected degrees.
Layout Options
Layout Options allows you to select advanced printing options.
You can choose Multiple Pages per Side and Poster.
• For details, see “Printing Multiple Pages on One Sheet of Paper
(N-Up Printing)” on page 12.
• For details, see “Printing Posters” on page 13

db86eb5.jpg


Jan 16, 2008 | Samsung ML 2010 Laser Printer

1 Answer

Printer Ghosting


Assuming you are using a Windows operating system, go to Start, Settings, Printers and Faxes. Once the windows opens, right click your printer and go to Properties. Each printer's options here are slightly different so look around in all the tabs here for an option to align the print cartridges. I hope this helps.

Jul 28, 2007 | Dell 922 All-In-One InkJet Printer

1 Answer

Dell 922 Printer


You will have to use the New Dell 922 VISTA drivers and not the XP drivers in order for it to work with your Vista Loaded PC. The new drivers for the 922 under Vista are available for download at Dells website. Check out this link http://support.euro.dell.com/support/topics/topic.aspx/emea/shared/support/dsn/en/document?c=ed&docid=314972&l=en&s=bsd Hope this helps.

Mar 17, 2007 | Dell 922 All-In-One InkJet Printer

Not finding what you are looking for?
Dell 922 All-In-One InkJet Printer Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

The Knight
The Knight

Level 3 Expert

69955 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...