I am not a repair professional. I am a 78 year old man who has been making his own repairs for about 50 years. So the machine ID doesn't mean much to me. I came to fixya looking for a schematic for an really old AM/FM radio and just happened to see that more than 4,700 people were asking for help with a washer repair. I recently had a washer repair of my own and at that time I found an excellent video on youtube which showed me how to take my machine apart. This video (direct drive washer repair) made it possible for me to do my own repair. You probably don't have any idea of the wonderful help you can get from youtube videos. Your first stop should be at youtube. Just search for the help you need. You could search for "clothes dryer repair" or "clothes washer repair" or "dishwasher repair". If you are not able to view and/or download the videos, or after you've seen all you want to see, I suggest you go directly to www.applianceaid.com where they have very good step by step trouble shooting and repair information on washers, dryers. and dishwashers as well as other appliances. Another excellent site is www.acmehowto.com If you have a direct drive top load washer and need help taking it apart these youtube videos are wonderful help. I was so impressed with them that when I saw all these people needing help, I wanted to tell them about the videos. If you look at the back of your top load washer and the panel is solid (no small inspection plate to remove, which would indicate you have a v-belt drive) chances are you have a direct drive and this video (direct drive washer repair) is just what you need. After you've seen all the appropiate videos, or if you have a belt drive washer, you will probably still need help in determining what the trouble is and how to fix it. I suggest you go to www.applianceaid.com where they have very good trouble shooting and repair nformation on most washers and dryers, dishwashers and many other household appliances. I think you'll find what you need there. Another excellent site for DIY help is www.acmehowto.com Don't worry about the timer on a washer, they hardly ever go bad. I realize I haven't solved your problem for you, but I hope I have sent you where you can get help to solve the problem. Good luck with it.
) to start a Power On/Off cycle. Do not hold down the button
.
Figure 1: Press and quickly release the Power button
Illustration of pressing and releasing the power button
If you press and hold the Power button too long, the product might turn
on and then turn off without restarting. The product might also appear
to be turned off in Powersave mode. In either case, press, and then
quickly release the Power button (
) to turn on the product.
Solution two: Check the electrical connections and outlet
Follow these steps to make sure that all the power systems work correctly.
Illustration: Power module
Illustration: Power cord
If the power cord or power module shows any damage, contact HP to replace the power supply.
If the green light (LED) on the power supply does not light up, contact HP to replace the power supply.
) to turn on the product.
) to turn on the product.
) to turn on the HP product.
201 views
Usually answered in minutes!
×