Question about Kirby G6 Bagged Upright Vacuum
You can get it on DVD, VHS or book format by clicking this link,...
Posted on Aug 28, 2008
Posted on Feb 19, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: The blower attachment
You need to take the power nozzle off and attach the thing that looks like a little plastic cup with two hooks on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. You'll have to line the arrow on the hose up with the notch on the Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier. Since you lost your manual, you may need belt change instructions as well. Here is a link to my online guide that will show you how....
Hope this helps...
Posted on Nov 09, 2007
this site may be helpful
make sure the brushes on the shampooer head are spinning and that you have the shampooer head lowered all the way down to its lowest setting. Also...shampoo at a slower pace than you would move when vacuuming...when both putting down the suds on heavily soiled areas and scooping them up. The more oils in the carpet, the less suds you'll see when the shampooer is working properly. one more thing that may be mentioned in the guide is the little round sud screen that attaches to one end of the shampooer hose...make sure that little mesh screen is there and seated properly. It is what produces the suds from the shampoo solution.
Posted on Jan 07, 2008
ok lift up the light plate on top of the rug nozzle then turn the belt lifter on the rug nozzle to the right until you cant turn it anymore then lift the latch on top of the rug nozzle then hook up the hose to the hole where the rug nozzle was and latch it on and your ready to go
Posted on Jul 10, 2008
Here is a link to available owners manuals...
Hope this helps,
Posted on Jun 28, 2009
Tips for a great answer:
May 20, 2014 | Kirby Sentria Upright Vacuum
Oct 09, 2011 | Kirby Ultimate G Bagged Upright Vacuum
Jun 11, 2010 | Kirby Ultimate G Bagged Upright Vacuum
Sep 24, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Jun 25, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Mar 23, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Nov 02, 2008 | Kirby Ultimate G Bagged Upright Vacuum
Aug 17, 2008 | Kirby G6 Bagged Upright Vacuum
Jun 08, 2008 | Kirby Ultimate G Bagged Upright Vacuum
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: