Question about Levelone WCS-2010 Network Camera

1 Answer

Can't view image using Internet Explorer 7 with Window Vista Business.

Does this system support window vista and can the image view thru Internet Explorer 7?

Posted by on

  • Yarda Nov 27, 2008

    Negative: Under Vista/IE7, I get HTTP 400 bad request, while using Vista/Firefox I can obtain the page (but not the video stream, sure). The two HTTP GETs do differ, IE7 is not OK here. IE7 omits the autentication or too long Accept: line.

  • Anonymous Jan 12, 2009

    same problem here... there is no image on firefox/ safari.. and with ie7 i cant even log in. this is under vista.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers

Once IP camera setup complete access can be done with any browser regardless of operating system. So even if its on Vista, XP or Linux it will be accessible. For example if Camera IP has been set as 192.168.0.33, You need to type http://192.168.0.33 in your browser (IE 7 will work).
If you dont have user manual you can get from the link below
ftp://download.level1.info/manual/WCS-2010(EN).pdf

If you need further assistance please post your question
Good Luck

Posted on Jan 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok i can see the other person they can't see me i can also hear them and they can hear me though i can't be seen


1.Check that your webcam is switched on and is connected to your computer.

2.Close all programs that may be using the webcam. These include video editing software, instant messengers (such as Yahoo Messenger or Windows Live Messenger), browsers, Windows Explorer, and even some websites.

3.Make sure that both you and the person you are video calling are using the latest version of Skype, Yahoo Messenger..

4.Make sure that you have the latest version of Microsoft DirectX. For Windows Vista and Windows 7, you can get the latest version of DirectX by updating Windows with the latest service packs and updates. For Windows XP, you can download it here.

5.Check that your webcam is listed in Device Manager
Do one of the following:
Windows 7: Click the Windows button and select Control Panel.
Click Hardware and Sound and under Devices and Printers select Device Manager.
Click the little arrow beside Imaging Devices.Windows Vista: Open the Start menu and select Control Panel.
Open System and Maintenance and click Device Manager.Windows XP:Open the Start menu and select Control Panel. Open System and in the Hardware tab, click Device Manager.Under Imaging devices, check that you webcam is listed

12_9_2011_1_37_52_am.jpg

If it's not listed, reinstall the drivers for your webcam.
A driver is the program you install with the webcam which makes it work on your computer. (Some webcams use preinstalled drivers so you may not have had to install one.) Make sure you have the most recent drivers for your webcam by downloading them from the webcam manufacturer's website.

Please let me know if you need further assistance on this issue .And try to include more information in your request ...like camera model # , operating system ( windows xp ,vista ,7, etc ...) , and the software you are using to chat online ..(yahoo messenger, skype , facebook,or any other platform ...)

Dec 09, 2011 | Labtec Webcam Pro

1 Answer

Hi my pc has window 7 and does not recognize the drivers for ezcam iii web camera


hi this may be a general problem if u have internet connected to ur system just click on the properties button as soon as u connect ur cam and select the drivers tab and update ur driver may be ur cam is meant for xp,vista if its given recommended for xp,vista,7 in ur cam cover box the surely insert the cd that came along with the cam and install the cam driver specified for windows 7 or else update ur driver as i have recommended.was this useful to u.
with warm regards- bonefirediv

Mar 25, 2011 | Ezonics EZCam III Webcam

1 Answer

I just got a new pc with windows 7 that cannot recognize the old windows xp driver for my veo velocity. I need this camera for my small business. Can I find any updated driver so I can continue using my...


If you go to the Veo website and look under the support section you will be able to search your product and download a driver for your operating system. A vista driver will also work for windows 7 so if the company website only lists a vista driver it will work for windows 7.

Feb 28, 2011 | Veo Velocity Connect Webcam

1 Answer

Pasos para instalacion de web camvx2000


Hola amigo primero que nada devemos saber que systema operativo usa tu computador Windows Xp Vista or Windows 7

Esta Web cam es configura automaticamente per piensa tambien en los requerimientos del su systema. aqui algunos tips.

Habla en espanol y solo pregunta ok

Techbelkin

System Requirements Operating System For Windows®-based PC
Requires a PC that meets the requirements for and has installed one of these operating systems
Processor Windows® 7
Mmimimum: Intel Pentium 4 (3 GhZ), 1 GB of RAM; recommended: Intel Pentium (Dual-Core 1.8 GHz), 2 GB of RAM, 1250 MB free Windows Vista®
Mmimimum: Intel Pentium 4 (3 GhZ), 1 GB of RAM; recommended: Intel Pentium (Dual-Core 1.8 GHz), 2 GB of RAM, 1250 MB free

Windows® XP with Service Pack 2 (SP2) or later
Mmimimum: Intel Pentium 4 (3 GhZ), 1 GB of RAM; recommended: Intel Pentium (Dual-Core 1.8 GHz), 2 GB of RAM, 1250 MB free

Other CD-ROM

USB 1.1 (2.0 recommended)

16-bit color depth or higher, 2 MB or higher video memory

Windows-compatible speakers or headphones Internet Broadband Internet access may be required for certain features. Local and/or long-distance telephone toll charges may apply.

Internet functions also require Internet Explorer® 6/7 for installation; 25 MB hard-drive space typically required.

Nov 03, 2010 | Microsoft LifeCam VX2000 Webcam

14 Answers

I have a Sony SNC-RZ30N webcam that I can only view the video from on a very few computers, all of my more up-to-date computers only see a blank screen in the browser view.


1. Go to the Windows Desktop, click on the "Start" button, and then click "Run" or "Start Search" if you are using the Windows Vista operating system.
2. Type the following text into the text box:
1. "devmgmt.msc" Click OK.
2. Select your computer when the Device Manager window opens, and then select "Action" from the options at the top of the window.
3. Choose the "Scan for hardware changes" option from the drop down menu that appears.
4. Insert any USB device such as a mouse or flash drive into the USB port in question. Now simply check the USB device to see whether it is working in order to test the port.

Nov 02, 2009 | Sony Webcams

1 Answer

Can't view image using Internet Explorer 7 with Window Vista Business.


Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next "Calling and Devices" on the right, set the Microphone and Speakers to the computer Audio Card or headphones/mike.
Next go to the Test Audio section below where you just setup the microphone & speaker and (written in blue) click on "Open the call setup assistant"
and the "Yahoo Call Setup Assistant" window will open to the left and follow the the instructions. Click on FINISH and the audio will be setup.
Next go to "Webcam" and click in the circle "Allways allow the following people to view my webcam.
Next Click on "Super Webcam" snd in the circle click "Start Super Webcam mode automatically".
Then click OK and it should work.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

May 28, 2009 | Levelone WCS-2010 Network Camera

1 Answer

Can someone help me fix this


Using a Webcam like Logitech QuickCam® Messenger onWindows Vista, Internet Explorer 7 sometimes an error such as0x80004005 / 0x80040606 appears.

Try this workaround and disable UAC.

Goto Start Menu > Start Search > type: "msconfig" >
Tools Menu > Disable UAC > Launch > Apply > OK > Restart.

In general though - you should not have to disable this security featureof Vista in order to install and operate the Logitech software.

If this workaround works, then it is a flaw in the program and you should contact Logitech customer support directly.

Sorry for not having "the" solution on hand, but I've seen many people having that problem. Some changed to a prgram called "splitcam" becuase they were tired of Logitech's sloppy software.

Jan 16, 2009 | Logitech Quickcam Chat Webcam

2 Answers

Quickcam 9.5 working with windows vista


Normal 0 Go to this site
http://www.logitech.com/index.cfm/support_downloads/&cl=us,en
Then
Search by Image
or
Search by Name
and
Product Name.
This will then take you to the next window where you need to select your
Operating System. Then you will get your download driver.
Hope this helps. Bud

Jul 21, 2008 | Logitech QuickCam Pro 5000 Webcam

2 Answers

Veo Advanced Connect Personal Web Camera


Hi

It seems VEO went out of business or their site has been hacked. (Their site - http://www.veoproducts.com/ is now a weird search engine).

It is hard to come by the drivers now, but a Nero Image and ISO Image is hosted here

Nero Image - http://www.nztechie.com/downloads/ISO/VeoInstallCD.nrg
ISO Image - http://www.nztechie.com/downloads/ISO/VeoInstallCD.iso
NB: About 154MB

The install CD claims compatibility with Windows 98/ME/2000/XP. It should be compatible with Windows Vista when compatibility mode is used.

Mike

Mar 27, 2008 | Veo Advanced Connect Webcam

1 Answer

No picture


VISTA DRIVERS Sorry but I searched everywhere but it seems your product's manufacturer has no recent driver for it in Vista.

Sep 11, 2007 | Microsoft LifeCam NX-6000 Webcam

Not finding what you are looking for?
Levelone WCS-2010 Network Camera Logo

Related Topics:

1,616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Levelone Webcams Experts

micky dee

Level 3 Expert

2624 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Levelone Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...