Question about Harman Kardon CDR2 2-Disc CD Recorder

1 Answer

Require a LEFT SIDE [CDP] LENS BLOCK

I urgently require the CDP Lens Block, specs. as below:-

The Serial No. of my CDR-2 : LG 0002-12189

Board No.: 6870S-423AD
000207-10
with Lens Mechanism

Lens No. : SF-151

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Hello, I can supply a replacement. Email me via ebay - seller id is fluffcat1

Posted on Feb 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Add too the question below. The knocking is on the top end on the back left cylinder I believe its #3


a knocking noise is usually associated with a spun/burnt bearing ---rod knock which would require lower end rebuild or if cylinder walls are also damaged require new block

Aug 09, 2015 | Cars & Trucks

2 Answers

How to remove lens from Olympus SP-550uz or Olympus SP-560uz


This cleaning process is very delicate and sensitive. Cleaning lens should be done by authorized or pro camera technician. I suggests you to bring it to the nearest cam service center because they have appropriate tools to open the camera and properly clean it. A single failure or error on cleaning it by yourself might give fatal result to your camera.

Oct 04, 2008 | Olympus Cameras

1 Answer

E:61:30 error message


this error is
"Reset position detect error when stepper iris is initialized"

Turn on the power and set to T (telephoto) end by rotating the
ZOOM manual ring. While observing the iris blades in the
lens, turn on the power again and check the iris blades in the
lens work properly. Inspect the iris drive motor of lens drive
block (Pin qh to ql of CN6602 on the VC-582 board), when
the iris does not operate. Inspect the iris reset sensor of lens
drive block (Pin qd to qg of CN6602 on the VC-582 board),
when the iris operate.
if you need more help you can download the factory service manual from the below link:
http://goo.gl/Wt4pr
Good Luck

Apr 20, 2013 | Sony HXR-NX5E Camcorder

2 Answers

Remove and replacefreeze plugs on 350 chevy


their are 8 of them , 2 located on the back of engine where the tranny bolts, 2 on each side of the block below the heads, their is also 2 on each side of timing cover,

Dec 11, 2012 | Chevrolet 2500 Cars & Trucks

1 Answer

Screen goes white when I turn the camera on. Nothing happens. To turn it off I have to remove battery - for pentax option A20 camera


Dear Sir,
This is probably problem of the lens block.
You can open camera and try to clean flexi print cable(connection between lens block and main board) and connect again.
If the problem stay you need to send camera to the Pentax service center for change of the new lens block.

Best Regards
AIOS

Apr 20, 2010 | Bass Pro Stealth Cam 1230 Digital Camera

3 Answers

Picture covered with big block of black - 3/4 of the screen ???


It sounds like your tv may require a plasma panel, but to be sure remove the back of the tv unit and check the y-sus printed circuit board as well as the z-sus printed circuit board, check that they are getting the correct voltage and that there are no blown compoments on the boards themselves. The boards names, z-sus and y-sus are written on the board as well as the voltages are listed down the side of where the plugs at the boards meet. Good Luck. Oh , and also, check with LG that it doesnt require a software upgrade.

Dec 02, 2009 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

Cds dont load and tracks will skip during song play


It is clear symptoms of bad optical laser or dirty optical lens.
Please put lens cleaning CD in player, play that CD to clean dust on optical lens surface. If that helps, fine or replace optical laser block in player.
I can provide you optical lens part number, please confirm is it Sony CDP-CX153 cd player or any other model.
Thanks.

Oct 27, 2009 | Sony CDP-CX153 100-Disc CD Changer

1 Answer

Lens cover opens only a **** on Sony DSC-W80


Please read carefully below procedure how to remove "Barrier Block" (what you call Lens Cover)..
Turn camera power ON so Lens will extend.
Take out battery so lens will remain extended.
First silver ring needs to be removed with help of tweezers as shown in below image..
76ab48e.jpg
Now you will see 2 screws at front of lens, unscrew to remove barrier block (lens cover) as shown in below image..

89895aa.jpg

You need to have new barrier block with following part number..

A-1205-001-A BARRIER BLOCK ASSY

Subject part is available in Part Store

Install new barrier block as shown following image..

e397a80.jpg

Insert battery and power up camera to check does barrier block works fine.
Need further info, let me know.
Good luck.

Feb 10, 2009 | Sony Cyber-shot DSC-W80 Digital Camera

1 Answer

Unable to load playstation dics or any other discs for that matter


  1. The white plastic gear that moves the laser must make contact with the "motor". A bad contact here can cause disk read errors. Sometimes it looks Ok, but you may need to remove the lens and bend the white gear for good contact.
  2. The two rails on which the lens move must be very slippery - which can be lubricated with cooking or motor oil. Usually the holes where the rail is (on the right side of the lens) are dirty or you have to bore then out slightly, making the holes bigger.
  3. The lens uses little torx screw (black) that move the lens up and down on the rail. Usually the lens is too high and requires adjustment.
  4. Take the lens off these 2 rails and take the black plastic cover off. Turn the lense upside-down and you'll find there are 2 screws (silver, phillips or torx) that you have to remove to take the upper little lens off.
  5. Then you'll see a larger lens that is usually very dirty (this lens is a mirror to light). If that's dirty, it will give a disk read error. You'll have to take the little electric board off that you see on the other side of the big lens-mirror. It's probably dirty too, so clean it. Alcohol should work OK for this task.
  6. The lens bottom has 2 + 2 screws. You move the upper "little" lens up-down-left-right (this may require a special screwdriver)
  7. The motor "rail" that moves the lens must be very clean and oiled and the 2 rails too.

Jun 05, 2008 | Sony PlayStation 2 (PS2) Console

1 Answer

Cover over lens doesn't open properly.


This is a common fault and is caused by dirt/dust/sand particles interfering with closing/opening of the lens cover ( btw before you do anything else try blowing out with compressed air ). Solution :

1) repair yourself route ( if brave and skilled enough) : remove screws and fron cover compltely. Unsolder six thin wires on the left hand side of the circuit board. When front cover is removed blow out sand /dust from the lens cover which is now quite accessible.
2) send to repair outfit route . Note that this is not an expansive repair which does not require installation of spares. So perhaps you should send it in.

Jan 14, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

Not finding what you are looking for?
Harman Kardon CDR2 2-Disc CD Recorder Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harman Kardon Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

604 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

Are you a Harman Kardon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...