Question about HP Color LaserJet 3500 Printer

2 Answers

HP COLOR LASERJET 3500

In hp color laserjet 3500 printer,Color print is not proper. I have changed all cartiage & Transfer kit but color print is not coming properly.

Please get solution this problem

my mail id : sarvanka@yahoo.com

Posted by on

  • Miroslav Erkic
    Miroslav Erkic May 11, 2010

    Can you be specific about problem!
    Not enough color, which cartridge!!!

  • Anonymous Mar 20, 2014

    reset transfer kit hp laserjet cp4025

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

Try in on printer to do full calibration!!! Because printer do quick but you need to do full calibration

Posted on Feb 12, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 103 Answers

Hi!

If you could possibly manage to access the machine status menu and have it print to check the drum's life, fuser life, developer, etc.. pls refer. Kindly replace the toner cartridge accordingly use the menu settings when replacing any color if needed. Please print solid image or block in each color Cyan, Magenta, Yellow and Balck. Well see if what color causing the problem. Please let me know the print result it may be; washed out or too light, too bright or black, double image, or not clean. Don't hesistate to contact me again about the result.

Best regards,
Rosener Guyano

Posted on Feb 02, 2008

  • jcoch8
    jcoch8 May 07, 2014

    If problem isn't solved yet,try changing yellow toner because yellow toner is probably leaking.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset an hp 3500 color laser jet printer?


follow the steps :
  1. Press MENU to enter the MENUS .
  2. Press c00047416.gif (Down arrow) to highlight CONFIGURE DEVICE .
  3. Press c00047417.gif (Select) to select CONFIGURE DEVICE .
  4. Press c00047416.gif (Down arrow) to highlight RESETS .
  5. Press c00047417.gif (Select) to select RESETS .
  6. Press c00047416.gif (Down arrow) to highlight RESET SUPPLIES .
  7. Press c00047417.gif (Select) to select RESET SUPPLIES .
  8. Press c00047416.gif (Down arrow) to highlight NEW TRANSFER KIT .
  9. Press c00047417.gif (Select) to select NEW TRANSFER KIT .
  10. Press c00047416.gif (Down arrow) to highlight YES .
  11. Press c00047417.gif (Select) to select YES . The transfer unit count is reset and the printer is ready to use.
Mohamed Hejazi
Afaqnama-LIbya
ipg@hplibya.com

Feb 27, 2013 | HP Color LaserJet 3500 Printer

2 Answers

Asking to replace transfer kit - old printer is this necessary? Can it be over ridden?


You can not over ride it. You can keep on printer till the printout gets bad. Then you will have to replace the transfer kit.
Gerrit Jan

Nov 11, 2009 | HP Color LaserJet 3500 Printer

1 Answer

I have hp color laserjet 3500 is printing only cerrent page


Try reinstalling the printer driver software again. This could solve your problem.

Jan 27, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Very Light Printer on HP Color LaserJet 3500


Table 7-33. Causes for distortion or blurring
Cause Solution
Transfer unit is defective. Replace the transfer unit. Calibrate the printer
after replacing the transfer unit. See Calibrate
Now, later in this chapter.
Defective secondary transfer roller If it does not rotate smoothly or it is deformed,
replace the secondary transfer roller.
DC controller PCB is defective. Replace the DC controller PCB. Calibrate the
printer after replacing the DC controller. See
Calibrate Now, later in this chapter.

Calibrate Now
Use the following procedure to calibrate the printer whenever you replace the DC controller,
the formatter, the color misregistration sensor (PS12), the transfer unit, or the laser/scanner.
1. Press to enter the MENUS.
2. Press to highlight configure device.
3. Press to select configure device.
4. Press to highlight PRINT quality.
5. Press to select PRINT quality.
6. Press to highlight CALIBRATE NOW.
7. Press to select CALIBRATE NOW.
8. Wait for the printer to calibrate.
hope this helps
pdouglasss

Dec 17, 2008 | HP Color LaserJet 3500 Printer

1 Answer

I changed the trasfer kit on my HP Color LaserJet 3500 and now the print is very light. I used and OEM transfer kit and followed the instructions provided by HP. Help


Calibrating the printer
Calibration is a printer function that optimizes print quality. If you experience any print quality
problems, calibrate the printer.
1. Press MENU to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight PRINT QUALITY.
5. Press to select PRINT QUALITY.
6. Press to highlight CALIBRATE NOW.
7. Press to select CALIBRATE NOW.

Hope this works for you
pdouglasss

Dec 17, 2008 | HP Color LaserJet 3500 Printer

2 Answers

HP 4500 Printer blank pages


Hi over the years on working on these printers I have found the transfer belt-kit causes this model to print blank pages i would try this


hope this helps


James

Dec 15, 2008 | HP Color LaserJet 3500 Printer

1 Answer

Transfer kit-HP 3500 laserjet


Hi dbourienne:
Yes it is but you may start having print quality problems ,but as long as the part has been ordered and will be installed soon, it will be ok to print.

pdouglasss

Nov 17, 2008 | HP Color LaserJet 3500 Printer

1 Answer

Hp laserjet 3500 transfer kit


Hit the check botton on the control panel for the printer. Scroll down to "Configure Device" and hit the check button. Scroll down to "Resets" and hit the check button. Scroll to "Reset Supplies" and hit the check button. Scroll to "New Transfer Kit" and hit the check button. Scroll to "yes" and hit the check button.

Hit the return button (next to check button) until back at ready again. Transfer belt count should be reset now.

To make sure, from the info menu, scroll down to "print suply stus page" and hit the check button. Transfer belt should read as 100% now.

DON'T WORRY IF IT TAKES MORE THAN ONCE FOR IT TO TAKE. WE'VE SEEN IT TAKE 2 OR 3 TIMES OF REPEATING THE PROCESS (for no good reason) BEFORE THE MACHINE RESETS THE COUNT.

Aug 25, 2008 | HP Color LaserJet 3500 Printer

1 Answer

Hp inkjet 3500 prints red as yellow


how do i get the printer to read that i have put in a new transfer kit.

May 06, 2008 | HP Color LaserJet 3500 Printer

Not finding what you are looking for?
HP Color LaserJet 3500 Printer Logo

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96372 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...