I have to press 15-16 times ON/OFF switch to start my monitor. I have fed up with this . Please give solution. I have replaced a new switch, but that doesn't solve the problem. Pl guide us in right direction.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
my samtron 56v problem stand by when i power off yet i power on it is off position whats problem with me.switch is many time pressing then is on position.what is parts of my monitr suplly fault.wich part is spoil
When you switch on the computer can you hear it beep?
If yes then it could be a monitor problem.
This could be monitor or computer ,the only way to test is to try the monitor on another computer or vice versa.
try pressing the buttons (with your monitor turned off) if they have allowances for switching (if it is a push button then each should be pressed slightly and you should feel that it switches through!) if you pressed it and felt hard ( like something was stuck) then the buttons might have misalligned from the switches on the board. do not open your monitor unless you have electronic servicing experience. other causes might be the monitor's sync. processing IC. it could be defective.
If I were you I would invest in a new video display card. Sounds your card is intermittant, because the chances of a tube type display and a TFT display having the same problem is slim to none. LOL Good Luck
Please dont forget to rate this thread