Question about RCA DIRECTV Satellite Remote Control

1 Answer

Volume not responding on Direct TV remote

I'm using the remote from Direct TV, and have not had problems in the past. Today however, I cannot get the volume buttons to respond. When pressed, they make the green Direct TV logo light flash, and then the TV light flash (the green lights at the front of the top of the control). Assistance please?

Posted by on

  • Anonymous Aug 09, 2008

    volume want work

  • Anonymous Sep 01, 2008

    Exact same issue, have tried EVERYTHING I could find on the web, or even trying my own experimentss..Nothing works...new Direct TV DVR system and all I can do is WATCH with no volume

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Http://www.directv.com/learn/pdf/System_Manuals/RCA/RCA_DRD221RD.pdf

See Page 15.

Worked like a charm! Good luck!

Posted on Nov 28, 2008

  • Mick Jay
    Mick Jay Oct 30, 2015

    You probably got soda or some liquid in the remote and the pads inside can't respond now you need to take it apart and clean the pads underneath the buttons. Use mild soap and your fingers. That should do it. Good luck!!!
    Mick Jay

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Search Fixya...lg remote not working on direct tv


replace batteries --if not still working possible circuit board damaged ===cheaper to replace then repair

Jun 16, 2017 | LG Televison & Video

1 Answer

Had my samsung dlp tv repaired today. tvs fine now but the remote does not work(still works on dvd player) direct tv remote does power on tv either or control volume anymore


It sounds that the remote control should be programmed once again with TV with its setup codes. Setup codes for Samsung TV are:

0105 0077 0076 0109 0007 0009 0004 0005 0085 0172 0942 0358 0012 0015 0080 0104 0106
Check these codes, and select one which have maximum functionality with your TV.

Jun 28, 2012 | Samsung TV Remote Control

1 Answer

Remote sensor on tv not responding


the problem is the s/w on the tv if you have some solder experience this is easy to fix just repalce the s/w

Feb 12, 2012 | Sylvania LC420SS8 LCD TV

1 Answer

None of the codes listed works for my panasonic television. None of them will allow me to use the channel or volume buttons and only one of them allowed me to turn the tv off. Now that one doesn't even...


Hello
I'll give you some universal remote control codes for Panasonic to check it with your remote control They are used as general universal codes for panasonic.
Three digit universal remote codes to check with are:
003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171
Four digit unvicersl remote codes to check with are:
0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Mar 21, 2011 | GE JASRM24912 Remote Control

2 Answers

Where can I find a book on the different UVerse Remot tv codes for a new tv?


Hello

Universal remote code for Panasonic TV/VCR/DVD combo is

0437

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Dec 19, 2010 | Panasonic PV-DM2792 Triple Play 27 in....

1 Answer

Sony model KDL-32L5000 does not respond to the commands of its remote control model RM-YD028. We have been using a Direct TV remote as well to control volume but its not reacting this remote either...


If the only thing not reacting is the audio, then the audio board or the main board has gone bad. Enter the model number and tv make on you tube to get more detailed info.

Dec 15, 2017 | Sony KDL32L5000 32 in. LCD HDTV

1 Answer

TV not responding properly to remote or direct input


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]


Apr 03, 2017 | Insignia NS-LCD19 19 in. LCD TV

2 Answers

Tv doesnt respond to buttons or remote


this is looking like a common LG problem our tv started doing this tonight

May 15, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Not responding to remote,volume maximizes itself


this tv is known for the key board buttons geting stuck on . you can take the front panel off on disconect the key board to see if the remote works.

Apr 22, 2010 | Mitsubishi WS-65611 65" Rear Projection...

Not finding what you are looking for?
RCA DIRECTV Satellite Remote Control Logo

Related Topics:

5,022 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...