Question about Barebone Systems

1 Answer

Need software to print - Barebone Systems

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 201 Answers

Hey there hagiang, your request was not very specific so I will assume you are looking for the driver for your specific printer. These drivers usually come with the printer on a CD. They are often auto-install and guide you through the setup. These drivers are specific to the manufacturer and model #. If you go to the manufacturer's website you should be able to search out the driver you need. Hope it helps. Good Luck!

Posted on Jan 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer Problem


error occurred
1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on.
3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.)
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter.

Mar 19, 2008 | Barebone Systems

1 Answer

Have hp officejet 6300 which prints well, but everything is shifted about an inch to the right, meaning there is no right hand margin, and a large left hand one.


hi the problem is goint to be with the software not the printer if the print quality is fine and its just the page allignment thats out then you will need to reinstall the software that came with the printer this will reset everything back to factory settings and this should then solve your problem.
Also have you looked at the print preview to see if it is ligned up properly on the page let me know ok then i can assist you further ok

Feb 04, 2008 | Barebone Systems

2 Answers

KONICA 7145 PRINT DRIVER


The Konica Minolta 7145 have two different companies that made the print controller. If you have an older KM 7145 then you need the old Peerless Legacy driver. It's not on KonicaMinolta's website. You can use HP 5Si driver, but you won't have and of the options (ie finisher, fax, lcc).

Mar 14, 2008 | Barebone Systems

1 Answer

Need help with my printer


it is most likely you need to clean the printer head,
then align the printer head,you should find the option to do this in the printer software.

you may need to do this a few times ,if this fails to correct the problem you need to replace the ink cartridge.
please rate my suggestion

good luck
Terry

Mar 13, 2008 | Barebone Systems

1 Answer

Please can you help me .my printer is kodak 5001 all in one.can you tell me how to print out doucument thank you


firstly you need to have the drivers & software loaded that came with your printer ,then you need to have produced a document in a word processing application such as Word for Windows or Word pad ,Notepad etc
then you should be able to print out the document
good luck
Terry

Mar 05, 2008 | Barebone Systems

1 Answer

I need the software for my canon ip6000d i can not print.


1st, a barebone system is a omputer hand built, 2nd
http://www.techspot.com/drivers/driver/file/information/8993/
This will get you printing in no time!

Feb 23, 2008 | Barebone Systems

1 Answer

Print Photographs on Minolta Magicolor 6100


Hi Ralph,
do you have any options within the printer or software program itself, to give you options to lighten-darken output ?
Or perhaps changing the resolution settings May Help You.
Also try to print a test page in printer preferences, to eliminate the printer itself.
Mike @ Compurepair.

Feb 23, 2008 | Barebone Systems

2 Answers

Hi I have a Lexmark X63 and it says add left cartridge and will not print. I have however already done that. The computer says the printer is busy.


Try reinstalling the printer drivers and software, sometimes the printer does not communicate with your PC properly.

Feb 14, 2008 | Barebone Systems

1 Answer

HP Deskjet 840c - Printing Emails


I did see you reinstalled your software) but please continue
It is important that you have that icon by the clock. Power off the printer by pressing the power button on the printer.
Please un-install your printer software through Add/Remove Programs within the control panel. Please restart the Pc after un-install is complete. Create a folder on your hard drive and name it, "HP DeskJet 840C". Go to this link listed below & download the printer driver software listed. When you save to disk you can choose where you want to save. Pick the folder you created. Save inside this folder. The HP driver (Will most likely be updated software). I promise, you will have a icon down by your clock when finished.
http://h10025.www1.hp.com/ewfrf/wc/product?product=59868&lc=en&cc=us&dlc=en&submit.y=4&submit.x=7&lang=en&cc=us
Follow the instruction in your manual for setup & installation.
If you using Outlook Express & you want to print or send through your printer the page should be set as 8.5x11". Orientation should be set to Portrait, unless you set this for A4.
Lastly, please turn off your anti-virus software during install & re-install. Just in case you come back to this thread!
please vote...

Jan 30, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...