Question about Pentax Optio S Digital Camera

3 Answers

A90 WHEN ITURN ON THE CAMERA I GET AN ERROR; A90, AND THE CAMERA LOOKS LIKE BLOCKED , HOW CAN I SOLVE THAT PROBLEM ?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.badongo.com/file/707791


B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...


Important!!! Insert a fully charged battery or connect to an external power source.

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware: Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voile...the Secret Menu appears!

Using the down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly! Only thing is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip!

Posted on Feb 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tengo una PENTAX OPTIO S y me sale el error A90, necesito que alguien me ayude y me envíe el archivo fwdc110p, ya que no lo localizo en ningún sitio. Muchas gracias.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is motorola a100 or a90 bettr to buy


The A100 has some features that the A90 doesn't, but it costs more. It depends on whether those features are worth the extra price. I'd personally be happy with either one.

Aug 31, 2012 | Hyundai Elantra Cars & Trucks

1 Answer

A90 error code


I am looking john honest...JB

Mar 25, 2010 | Pentax Optio 430RS Digital Camera

1 Answer

How do I solve my A90 prob?


I just fixed a friends Pentax Optio S4i.
You want to extract this file.
File name : O4IE101W.EXE
Format your SD card in my computer. Open the O4IE101W.EXE on your desktop. It makes the file fwdc124p.bin. Put the fwdc124p.bin on the SD card.
I did save this file on the flash card.

Then I fully charged the battery (I got this from the Pentax site)
I opened the "secret menu" by pressing the MENU-FLASH and the POWER button at the same time.
Once menu opened, I pressed the FOCUS twice then (FLOWER, MOUNTAIN, MF) symbol twice after this two toggles to the right with the OK button.
Then press the MENU button once again.
So the menu screen open now.
Down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.
Once this has been done, turn your camera off.

Turn camera on again opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading"
When it shows Complete, turn camera off.

You are finished and your camera should be ready to work again.

At least this is how I fixed my friends A90 error message.

The firm ware is here:
http://www.pentaximaging.com/support/manuals-and-literature/
navigate to your camera

Feb 27, 2010 | Pentax Optio S4i Digital Camera

2 Answers

My pentax optio S displays the error A90 it seems a firmware problem that need a file to recover it but I can't get it


I hav got the file. I fixed my Optio S with the A90 error and it is working again, but now all the pictures look out of focus. Damn it!

Jan 08, 2010 | Cameras

2 Answers

ERROR A90


from internet:


An A90 error means that there is a electrical fault on the main printed circuit board, and can only be repaired by sending the camera in for repair through your Pentax dealer.
I hope that your question has been answered to your satisfaction.
With kind regards,


Wim van Kleef
Pentax Digital Camera Support Team

(with cut and paste from ; )http://forums.dpreview.com/forums/read.asp?forum=1028&message=23626964

my sugesstion is after reading this go to your pentax supplier and ask them for a investigation repair (the don't repair yet but investigate what is defect and how much the repair costs would be (normaly is that you pay a amount of money and mostly it is deducted from the repair bill if you decide to let it be fixt. (ask them if they would act so , otherwhise sue them for a not good product)

Apr 26, 2008 | Pentax Optio S Digital Camera

1 Answer

A90 error Optio S4


Gerrit

So is jou probleem uitgesorteer ?

Apr 17, 2008 | Pentax Optio S Digital Camera

3 Answers

ERROR A90


OK Guys...After fidgitting for hours on this with the bits & pieces on this forum & on others...here's how I got it to finally work:

A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.pentax.de/mediapool/attachments/photo/100/104/46139/fwdc110p.zip

Optio S4, S4i & S5i shall use another file. Don't really know for S4 but for S4i & S5i, there on the Pentax customer service website at:

http://www.pentaximaging.com/customer_care/software_firmware?sfFlag=f

B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

http://www.pentaximaging.com/customer_care/show_firmware?firmId=1020

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware:

Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voilà...ze Secret Menu appears !

Using the down toggle of the OK button, go to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly ! Only thing, is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip !

Jan 30, 2008 | Pentax Optio S4i Digital Camera

3 Answers

Error A90


The a90 error message, relates to an electronic fault on the main printed circuit board of the camera.

Jul 05, 2007 | Pentax Optio 430RS Digital Camera

1 Answer

Digital camera problem


Only Pentax Technical Help support team wil be able to tell you what A90 means There may be a FAQ for that camera on the site - have you looked?

May 25, 2007 | Pentax Optio S4 Digital Camera

Not finding what you are looking for?
Pentax Optio S Digital Camera Logo

835 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentax Cameras Experts

kakima

Level 3 Expert

98921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Pentax Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...