Question about Canon PIXMA MP530 All-In-One InkJet Printer

1 Answer

Alarm on "9000" displayed

Had nearby lightning strike, now alarm is on, was 9000 displayed on display, now can't change to Fax or any other mode.
Is the 9000 an error code, if so what does it mean, something to do with fried phone links?
Lightning killed the last Fax and 3 modems, surge protectors don't help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Posted on Feb 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IRC4080i printer. How do I correct error code E000007-0001?


Error Codes Relevant to Fixing/Pressure Belt Displacement Control

E007 Fixing belt displacement error

0001: Upper belt displacement fault. (Either the upper belt full displacement or the belt displacement sensor

fault.)

0002: Lower belt displacement fault. (Either the lower belt full displacement or the belt displacement sensor

fault.)

0101: Upper belt HP detection error.

0102: Lower belt HP detection error.

Note:

Adjust the fixing/pressure unit HP with the following service mode at the installation or when replacing the

fixing (pressure) belt.

COPIER > FUNCTION > FIXNG > FX-UHP-S
> FX-LHP-S

Points to Note When Replacing Fixing Unit

By executing the service mode, the alarm code is closed and the total rotation time is cleared. Thus, this mode

must be executed when replacing the fixing unit.

If the mode is not executed, the following symptoms will occur.

-The alarm code is not closed.

06-0002: Fixing unit life alarm (Caused by the belt displacement)

06-0004: Fixing unit life alarm (Caused by the torque up)

-Although the total rotation time of the replaced fixing assemble does not reach to the message threshold, the

machine wrongly recognize that it reaches to the threshold and displays the message.

Be sure not to execute the mode except at the installation and the fixing unit replacement. If not, an error
message may not be displayed when the fixing unit reaches to its life.

Sep 10, 2015 | Canon Printers & Copiers

1 Answer

MX300 waste ink full


1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.

2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)



3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED

4) When the Power LED lights in green (and "ServiceMode Idle" is displayed on the LCD), press the Stop/Reset button the specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED



1) In the service mode, press the Stop/Reset button 4 times to enter the ink absorber counter resetting mode

.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the kind of ink absorber whose value should be reset to 0%.

Aug 13, 2014 | Canon PIXMA Printers & Copiers

1 Answer

Error 5b00


Hello, your error is about the ink absorber.

"Ink absorber full Japan:
[5B00]
Others:
[5B01]
P07 The ink absorber
becomes full.
Replace the ink absorber (ink absorber kit), and
reset the ink absorber counter."

This is the way to enter service mode:
"Start the printer in the service mode.
i. With the machine power turned off, while pressing the Stop/Reset button, press and hold
the ON button. (DO NOT release the buttons).
ii. When the Power LED lights in green, while holding the ON button, release the Stop/Reset
button. (DO NOT release the ON button.)
iii. While holding the ON button, press the Stop/Reset button 5 times, and then release both
the ON and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm
and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
iv. When the Power LED lights in green, the machine is ready for the service mode operation
and "0" is displayed on the 7-segment LCD.
2) Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During
operation of the selected function, all the Service Tool buttons are dimmed and inactive.
ii When the operation is completed, "A function was finished." is displayed, and another
function can be selected.
iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message
dialog box to exit the error."

You can use the service tool to reset this error after you have enter service mode.
here is the service tool:
http://www.4shared.com/file/QptYmQTM/ServiceTool_V1074planet.html?

Nov 03, 2013 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Printer not working.


Start the printer in the service mode.
i. With the printer power turned off, while pressing the Stop button, press and hold the ON
button. (DO NOT release the buttons).
ii. When the Power LED lights in green, while holding the ON button, release the Stop button.
(DO NOT release the ON button.)
iii. While holding the ON button, press the Stop button 2 times, and then release both the ON
and Stop buttons. (Each time the Stop button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Without the scanner (connect the operation panel unit.);
While holding the ON button, press the Stop button 3 times, and then release both the
ON and Stop buttons. (Each time the Stop button is pressed, the Alarm and Power
LEDs light alternately, Alarm in orange and Power in green.)
iv. When the Power LED lights in green and "Service Mode Idle" is displayed on the LCD, the
printer is ready for the service mode operation.

Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During
operation of the selected function, all the Service Tool buttons are dimmed and inactive.
ii When the operation is completed, "A function was finished." is displayed, and another
function can be selected.
iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message
dialog box to exit the error.

(7) Main Main ink absorber counter
resetting
Set a sheet of A4 or Letter sized plain paper. After
the ink absorber counter is reset, the counter value
is printed automatically.

(8) Platen Platen ink absorber
counter resetting

Jul 06, 2010 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

Machine won't print, copy or receive a fax


With red button stop the copy, or switch off and on.

If you print on this unit make sure that you did choose a right format of paper (A4,A5,...)

You can change the format ap printer properties or preferences

May 21, 2009 | Canon imageCLASS® MF6550 Laser Printer

2 Answers

Can not clear memory on PIXMA Canon MX700


dear david

try this

) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release
the buttons). The Power LED lights in green to indicate that a function is selectable.
2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons.
(Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green,
starting with Alarm LED.)
4) When the Power LED lights in green (and "Service Mode Idle" is displayed on the LCD), press the Stop/Reset button 4 times.
5) Press ON/OFF, press Stop/Reset 2 times
6) Press ON/OFF. Unplug printer and plug back in. turn on and should be cleared

oke , post me back
cropp

Mar 31, 2009 | Canon PIXMA MX700 All-In-One InkJet...

2 Answers

CANON MP 730 Wont print - alarm orange is flashing


i cannot perform any functions because the alarm light is flashing

Oct 01, 2008 | Canon MultiPASS MP730 All-In-One InkJet...

1 Answer

Only displays bars when you power up`


No surge protector is going to stop a lightning strike. It's just way too powerful.
1. Make sure you've unplugged, waited 10 seconds, plugged it back in. That's more than the on/off button does.
2. If your PC will communicate with the printer at all, Lexmark has a program that will reset it. It's located here: http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:520:0:0&docid=ENUS25837

Good luck!
Steve

Sep 11, 2008 | Lexmark X7350 All-In-One InkJet Printer

4 Answers

Receiving incoming faxes


# Press the button to enter Fax mode. # Press . # Press the right or left arrow button to select [Receive mode settings], then press the button. # Press the up or down arrow to select the receive mode that best suits your needs(you probably want "FAX ONLY" When you want to receive only faxes automatically with your machine, or have a dedicated telephone line for FAX use only), then press . # Press repeatedly to return to fax standby mode.

Aug 07, 2007 | Canon PIXMA MP830 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP530 All-In-One InkJet Printer Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...