Question about Panasonic Workio DP-4530 Copier

1 Answer

Keep getting error code E07-27

We are using a panasonic dp-4530. We have error code E07-27 displayed and prompting us to call a 800#. We could use any assistance to fix this and we are not technically inclined.

Posted by on

  • Anonymous Feb 01, 2008

    I turned my copier off and then back on to reset IP address and I got this message.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

E07-27 is a problem with the finisher tray lift motor. Make sure that a trash can is not under the tray. Have also seen screws work there way loose causing the tray to bind. If neither is your problem, you will have to call a service provider. Temporarily you can turn the power off, separate the finisher from the machine, unplug the connector, and turn power back on. You will not have a finisher but you can make copies until it is serviced.

Posted on Feb 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic 4530 e03-40


try to clean the copy density sensor near drum unit

Jan 01, 2014 | Panasonic Workio DP-4530 Copier

Tip

Panasonis Workio DP-4530 service manual?


Hello

My name is Edo and I am IT for UN mission in Afghanistan. We have copier Panasonic Workio DP-4530 and it is heart of our design office. We use copier for publishing documentation, for copying and printing. We can find any normal service in Afghanistan. The nearest place for repairing is Dubai.

I have experience with copiers and I want try to fix our copier. Currently, our new problem is error “clean fusser web”.
I need only if anybody have service manual in pdf or similar format. I will be very appreciated if anybody can help us. Your any advice is welcome as well.


Mr. Edin Husejnefendic
IT Systems Manager
Vertical Structures Unit
Afghanistan Operations Center (AGOC)
United Nations Office for Project Services (UNOPS)
House No. 6, Behind Emergency Hospital
District 10, Shar-e-Naw
Kabul, Afghanistan

Mobile: +93 0799 303-021
http://www.unops.org

on Jan 06, 2008 | Panasonic Workio DP-4530 Copier

1 Answer

What does error code E05-11 mean?


there is a communication error on the device most propably caused by a problem with the large capacity tray feed unit loom. there is a techinical update for this problem and you would need a technician to attend.

May 15, 2010 | Panasonic Workio DP-4530 Copier

2 Answers

What does error code E05-11 mean?


switch off then on, pull top cassette out slightly. this will provide a temporary solution. a service technician will need to see the machine.

Mar 29, 2010 | Panasonic Workio DP-4530 Copier

1 Answer

E07-20 Machine Error?


Hello sir; The error code you display , it's means " finisher transport motor, 2nd feed motor , shutter senser , shutter switch or safety switch" you have check all those item, most likely is switch .

Sep 23, 2009 | Panasonic Workio DP-4530 Copier

1 Answer

Dp 4520 error code E03-60


error e03-60 means waste toner collection. could be a problem with the mechanism that delivers the toner to the waste bottle. looks arround there

Oct 09, 2008 | Panasonic Workio DP-4530 Copier

3 Answers

Dp 4530 error code E03-40


e3-40 usually appears when the copy density sensor is dirty. it is located at the bottom of the drum unit. you may pullout the drum unit from the machine and disassemble it to clean the copy density sensor board. it is a small PCB that has two proximity sensors.

pls. keep in touch if you still need an assistance

Oct 09, 2008 | Panasonic Workio DP-4530 Copier

1 Answer

Printing to copier


ah, probably it means that the department ID is activated on your copier.
go to the printing preferences on of the panasonic dp-4530 on your pc, the click the job type tab.
on the space provided you may type in the code that you use during copying or ask the person incharge on your company re department code.

Aug 18, 2008 | Panasonic Workio DP-4530 Copier

1 Answer

For copier panasonic workio dp-4530


you mean all departments codes?
if you are the person incharge of copier on your company,
1) press function, gen settings, depart. mode,
2) input the 4 digit key operator code, the search for department mode again.
3) press the department code on the left side of the touch panel then you can erase each department code.

i hope hope this is helpful

Jul 17, 2008 | Panasonic Workio DP-4530 Copier

Not finding what you are looking for?
Panasonic Workio DP-4530 Copier Logo

Related Topics:

992 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Printers & Copiers Experts

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Panasonic Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...