Question about Evga (122-CK-NF68-T1) Motherboard
Motherboard has proven to be unstable. Factory defaults are used, memory has been swapped with known good memory. All settings are at "optimal" or "default" settings and cursor still jumps all over the place. Operating system used was Vista, and even tried XP x64 edition with the same results. I believe the board is defective. Any help will be appreciated
I have now gone through 3 of these motherboards, each ending with the same problem: Everything is on except it won't post. (The second board actually lasted about 6 months.) I tried every trick known to mankind, from reseating the CPU to swapping out the CMOS battery. EVGA kept suggesting it was the CPU but the CPU checks out okay. I am starting to believe it is the memory. I had Corsair 8500 C5Ds (4 x 1GB). Although they are rated to run at 1066 MHz, 5-5-5-15 2T, 2.1v, I ran them a JEDEC settings (800 MHz, 5-5-5-18 2T, 1.8v). The board is now blown as are the memory sticks. I believe the board can only run DDR2 800 (as it says on the box). The Corsair 8500s are too much for it, even at JEDEC settings. A solution, therefore, would be to use only DDR2 800s.
Posted on Feb 26, 2008
Is your problem solved?
If so please rate as fixya, if not please let me know so I can help you further.
Posted on Feb 19, 2008
Perhaps it is just the mouse, perhaps try another model mouse. If it isnt I would try something other then microsoft, perhaps Unix/Linux. We can then determine if it is really the board or your OS/ Configuration
Posted on Jan 30, 2008
Tips for a great answer:
Jul 03, 2011 | Motherboards
Apr 16, 2011 | Evga 112CKNF72K1 Motherboard
Nov 24, 2009 | Evga nForce 780i SLI 3xPCI-E x16 PCI-E 2.0...
Jun 18, 2009 | Evga (122-CK-NF68-AR) Motherboard
Jan 27, 2009 | Evga nForce 680i SLI 775 TR...
Dec 21, 2008 | Evga (122-CK-NF68-T1) Motherboard
162 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: