Question about Kitchen Ranges

1 Answer

GE range JBP72

For a year this range has popped the circuit it is on when you try to use a burner and the oven. Stupidly we just kept resetting the CB. Now, slightly more than a year old it has decided to stop working altoghether. What a piece of junk! I suppose we'll pay top dollar for someone to come out here and fix it. Any suggestions?

Posted by on

  • mikemaureen Jan 30, 2008

    It is Ge electric range jbp72kok3cc.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You would need to be a bit more specific as to what the problem is is the cooker gas or electric or both? if it is electric and its tripping the CB then the appliance is shorting out somehwere along the line, most comman cause is an element or if its gas the the ignition loop may need replacing

Posted on Jan 30, 2008

  • Steve Garner Jan 30, 2008

    i would suggest getting an engineer to look at the applince it sounds to me like either the burner is faulty or the element is,

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stupidly caused oven to short out and blow breaker and after resetting breaker, nothing works at all.


Tracey recheck that the breaker is reset properly,you may have blown the digital display/control board. In which case a tech. will have to diagnose and repair.

Apr 13, 2016 | GE Profile JDP46 Electric Kitchen Range

1 Answer

I have a 2 year old smoothtop GE stove. I was


that clicking usually means that the erc is trying to turn on the burners,
i would unplug the range
pull it out and check all the connections of the bake element

Oct 16, 2009 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Ge xl44 oven not igniting but burners ignite


The most common failure for a nobake on this type of oven is the bake ignitor. turn unit on and look at the bottom of the oven, you should after about 30-45 seconds see an ORANGE glow, if you do not, chances are you have a failed ignitor.Remove lower part of oven and if you have a meter, place one lead on each terminal and check for continuity( a closed circuit)
If you have an "open" circuit, the ignitor is bad

Feb 26, 2009 | GE JGRP17 Gas Single Oven

1 Answer

Oven burner makes a popping or whistling sound during baking cycl


STOP>>>>STOP{>>>STOP>>>
You have a gas leak in the oven.
Get this fixed immediately.

Feb 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Replacing oven burner element, the lower element, for a GE stove


(I think it is 50 watts or volts??)
Most electric ranges are supplied with 220 volts - this is, especially at 60 Hz, deadly. You were lucky this time.
If the wires are not welded onto the element contacts, they might be so-called 'quick-disconnects' that pull straight off of blades that are part of the elelment.  
You probably haven't hurt the range with the momentary short circuit since the chassis of the range is connected to neutral or ground so you just gave your breaker a workout. BTW, I have had to replace late breakers after they tripped. They wouldn't stay reset any more even after the problem was removed from the circuit. Don't be surprised if yours doesn't stay reset; it may not be a fault causing it. 

Jan 18, 2009 | General Electric Stove/Oven/Range Chrome...

1 Answer

GE Spectra - burner pops & blows breaker


Either the burner has gone bad or the limiter on the burner.

Jul 11, 2008 | GE Spectra JBP78 Electric Kitchen Range

2 Answers

Model JBP79 FFFcode


FFF Control Error, Failed EEPROM Replace Control
Unfortunately when you get this code the oven control will need to be replaced.

Nov 12, 2007 | GE Profile Spectra JBP95 Electric Kitchen...

1 Answer

No spark on all burners, oven doesn't work either


Give me the complete model # from the sticker on the oven and I will try to help.

Nov 07, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

77514 Answers

Paul Carew

Level 3 Expert

3089 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...