Question about Network Software & Management Tools

1 Answer

IPHONE SHOWING INCORRECT SIM AND ASKING FOR APPROVED SIM

Hi after doing all jailbreake from 1.1.2 to 1.1.1 again 1.1.1 to 1.1.2 i am getting a message as INCORRECT SIM & APPROVED SIM so plz help me what to do next

Posted by on

  • 1 more comment 
  • aravindan Feb 10, 2008

    i didnt take any steps

  • Anonymous Feb 27, 2008

    have the same prob



    what is solution please

  • WillHuff Mar 12, 2008

    Bought the phone on E-bay got an ATT sim and it just says incorrect sim and ITunes will not recognize it

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This was attempted on 5.11.2008
Hi I was using ziphone with 1.1.4 firmware and wanted to use Quickpwn 2.1. I restored my Iphone from I tunes by clicking and holding SHIFT then hitting restore in I tunes and after it rebooted it asked me to insert original sim-card. I inserted my pay as you go O2 sim-card, which it was happy with. I went to upgrade to 2.1.1 firmware but it asked me to upgrade to the latest I tunes. After updating I tunes I then uploaded the firmware 2.1.1 I then followed the procedures exactly as explained from QuickPwn, everything worked fine. It came to the end which also unlocked the phone but when putting in the unofficial sim-card, it said “Please insert original sim-card.

Posted on Nov 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getbymail is stack on 50% progress and do not cuntino


Hi.

GetByMail can handle big downloads, but in some case it may get stuck with a particular file.

Block the stuck process. If the program is frozen, restart GetByMail offline (disconnect Internet and restart).

When GetbyMail gets stuck with a download, access the mail box be using web mail, delete the message, and ask the message to be re-sent. If the download is very big you may need to split the file into using Windows compress utility or any other splitter/zip program (e.g. Winrar).

Regards.

Ginko.

Jan 27, 2011 | GetByMail

1 Answer

Try to activate and it tell me to check my proxy server. i am not useing a proxry server?


I do not know exactly what you are doing, however i suspect you are entering the incorrect details? exactly what are you trying to do? If it is activate a product over the internet than, you have the path incorrect.

Feb 21, 2010 | Network Software & Management Tools

1 Answer

When i open remote management showing a error message''error:1004'' please help me to solve this problem.


his problem can occur when you give the workbook a defined name and then copy the worksheet several times without first saving and closing the workbook, as in the following sample code: Sub CopySheetTest() Dim iTemp As Integer Dim oBook As Workbook Dim iCounter As Integer ' Create a new blank workbook: iTemp = Application.SheetsInNewWorkbook Application.SheetsInNewWorkbook = 1 Set oBook = Application.Workbooks.Add Application.SheetsInNewWorkbook = iTemp ' Add a defined name to the workbook ' that RefersTo a range: oBook.Names.Add Name:="tempRange", _ RefersTo:="=Sheet1!$A$1" ' Save the workbook: oBook.SaveAs "c:\test2.xls" ' Copy the sheet in a loop. Eventually, ' you get error 1004: Copy Method of ' Worksheet class failed. For iCounter = 1 To 275 oBook.Worksheets(1).Copy After:=oBook.Worksheets(1) Next End Sub

Nov 18, 2009 | Network Software & Management Tools

1 Answer

Whenever I tried to install the program I get a message saying that the messenger has stopped working and needs to close. When I let windows find a solution it never does. I am using Vista Ultimate. I had...


Hi...
The first step you should try is to uninstall by going into (control panel > add remove program) the mesanger and download the windows messanger.
http://download.live.com/
and reinstall it.
If that doesn't work the windows have to be repaired, you should have the windows CD for that..
Configure your computer to start from the CD-ROM drive. For more information about how to do this, refer to your computer's documentation or contact your computer manufacturer. Then insert your Windows XP Setup CD, and restart your computer.
1.
When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD.
2.
Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen.
3.
Do not choose the option to press R to use the Recovery Console.
4.
In the Windows XP Licensing Agreement, press F8 to agree to the license agreement.
5.
Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
6.
Follow the instructions on the screen to complete Setup.


Let me know
Thanks
Smith

Aug 08, 2009 | Network Software & Management Tools

1 Answer

Cannot update Quick Heak Antivirus Pus 2009 software


Please visit www.quickheal.co.ke then go to support tab then click on support forum. post this question there and you will be assisted. thanks

May 22, 2009 | Network Software & Management Tools

2 Answers

Lotus Notes 8:How do I turn off ?Send Immediately When Connected?


There is not a perfect mirror of that function in Notes, but you do have options.

The first one is the "Recall" option:
==========Extracted directly from Lotus Notes Help================
You can retract a message that you have already sent and saved in the Sent view. This is useful if you sent a message in error, or if you want to edit the content of a sent message and resend it.
  1. In your mail, open the Sent view.
  2. Select the message.
  3. Above the message list, click Recall Message. If this button does not display, your Domino™ administrator has disabled this feature.
  4. If the message was sent to more than one recipient, select the recipients to recall the message from.
  5. (Optional) To recall the message from a recipient even if the recipient has already opened or previewed it, select Recall the message even if it has been read.
  6. (Optional) To suppress recall status reports, clear Send me a recall status report for each recipient. Recall status reports confirm whether a message is recalled successfully or not.
  7. Click OK.
Note For a message recall to work, both you and the message recipient must be using the Release 8 mail application template (Mail8.ntf) on a Release 8 Domino server, and the message recipient must have the basic mail preference Allow others to recall mail sent to me selected.
===============================================================
Of course this assumes you catch it before they read it.

No other option works on an individual message, but treats all messages with the same 'solution'.

One of those solutions is the somewhat obvious [Save as Draft]. Of course then the onus is on you to follow up and actually send them. I've trained myself to use this option if I'm a bit hot under the collar.
You could assist that process by creating an agent that would flag you with a reminder when messages are held in the draft folder. To do that you will need to know a little bit about agents and scripting. It's not as scary as it sounds - the interface for creating agents helps guide you a bit. And don't get this confused with Rules. Though there are similarities Agents is a more robust scripting environment.

A bit more sophisticated method:
  1. The first step is to set up for local Replication, where your Inbox is mirrored on your local hard drive. This should be done anyway because it allows you to read messages offline and it reduces overall network traffic.
  2. This is similar to how Outlook would store your messages in the local .pst files. Your Notes admins may already have you set up this way. If not, inquire about it - all mobile users will depend upon this, and office users can benefit as well.
  3. The other benefit is that when you click 'Send' it's que'd up to be sent the next time it's scheduled to replicate.
  4. Once you have replication set up and you have defined your replication schedule you will have xx minutes between replications to change your mind. Again, not perfect, but bearable.
A companion to that solution is the use of Location Profiles.
  1. If you look to the bottom right corner of your Notes screen you will probably see the work "Office", or "Network". If you click there you will see your available default location profiles.
  2. Each location profile is set up to a specific enironment. In my office we have "Island (Disconnected)", "Office (Network)", and others - each one set up to assume a certain type of connection to the network.
  3. If I select 'Island" it won't attempt to contact the server, thus convincing Notes I am disconnected from the network and ques all 'Sent' messages to be delivered. Once again the onus is on you to 'connect' by selecting the "Office (Network)" profile in order begin the push/pull of your messages.
For more information look into the Help system for Replication, Location Profiles, and Agents.

A less frequently used option is to use the 'Transfer outgoing mail if: xx messages pending. In this instance you would set the number to a high threshold, say 50. But, again, you would be responsible for forcing the transmission by manually initiating replication.

Unfortunately, none of these is a perfect substitute for the Outlook option you depend on. I hope this helps.

Good Luck!

Apr 10, 2009 | IBM Lotus Notes (d53t7ll-bl) for PC, Mac

2 Answers

SECURITY SETTING ON SIGMATEL S9 PHONE


my phone is chaina sigmatel Dual sim & block Sim no.1

Oct 19, 2008 | Prosoft Data Backup 2.0 (databackup2) for...

1 Answer

Communication manager software license expired


Clearly, ATT would rather we get a new modem with their software, so they have more control over what we do with it.

However, I just discovered the following way to get connected:

In the Cingular Communication Manager
1. click Ok to the error message.
2. click Connections/Edit Connection Profiles.
3. highlight your EDGE/3G connection and click "Connect", and you will connect bypassing the error message (this must be a bug).
4. live with it.

Aug 03, 2008 | Network Software & Management Tools

1 Answer

Problem with iphone


I'm afraid you probably have a bad sim. I had a similar problem with a sony ericsson. phone would reject the sim, but a telco rep was able to recover data

Jan 28, 2008 | Network Software & Management Tools

1 Answer

Firmware version is 04.02.13_G for V1.1.2


Hi Suresh!

Please tell me the version of the iPhone you'e using. Why beacuse the cracks for the iPhone is upto a particular versions only..

Please tell me the version and model no. of the iPhone....

So we can look after the problem...

Dec 30, 2007 | Network Software & Management Tools

Not finding what you are looking for?
Network Software & Management Tools Logo

Related Topics:

851 people viewed this question

Ask a Question

Usually answered in minutes!

Top Network Software & Management Tools Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

caffeene

Level 1 Expert

4 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you a Network Software and Management Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...