Question about Hyundai V770+ 17 in.CRT Conventional Monitor

1 Answer

Help have a hyundaiimagequest v770+ and on off mode

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

Hi Bwill,

I can't figure out exactly the problem but let me figure out On Off mode. Presumming, you have connected the monitor signal cable to PC and your PC works fine and the video card itself works fine also then the problem is on the SMPS (swithcing mode power supply) of the monitor. Try connecting another monitor if needed checking the PC is fine.

When troubleshooting monitor's SMPS let a technical guy guides or somebody has a knowledge in troubleshooting SMPS for safety precautions. There might be a shorted HOT, component problems on primary and secondary side, control circuit, feedback ckt, load problems that immediately shutsdown the SMPS.

Best regards,
Rosener Guyano
www.surigao-csc.com

Posted on Jan 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have samsung syncmaster sa300 20 led monitor, How to fix Not Optimum Mode Recommended Mode 1600 x 900 60 Hz analog, can not playing games


hi
im from iran
i have a monitor samsung sa300 18.5" that one of ics burn and i cant read his number its 8 pin and is up of the data port input. two crakter that begin by it , is at **22
please help me

Feb 09, 2012 | Computer Monitors

1 Answer

Samsung syncmaster 226BW fails to wake up.


If pc not sending it to "sleep mode" or "power save" mode, then unit may need help of electronics technician to investigate the "internal switch-mode-power-supply" that may be going into "shutdown" mode after it detects a "fault condition" with itself or onother circuit.
12fixlouie

Sep 20, 2010 | Samsung SyncMaster 226CW 22" Monitor

1 Answer

Resolution set too high ..no picture cant get safe mode to work up down arrow buttons wont move ..computer wants to start normal...cant get into computer with no monitor display ...help...brand new...


Sounds like you need to boot up in VGA mode instead of Safe Mode

Step 1. Power Down your computer.

Step 2. Powwer on your computer and press F8 to enter Safe Mode

Step 3. Instead of selecting Safe Mode, Select VGA mode.

Step 4. Once in Windows, uninstall your graphics card for your Monitor.

Step 5. Restart your machine, when you log back in Windows will reinstall the drivers for your monitor.

Apr 21, 2010 | ViewSonic VX2025wm 20.1" LCD Monitor

1 Answer

My acer v223w monitor popped p "you are not in prefereed mode so i clicked on preered mode and it wnt blank pleae help


The preferred mode is the resolution at which the display looks best. Unfortunately, you switched to a higher resolution than your monitor can handle.
Now you must start in safe mode and change the resolution.
If you can't do that, hit the F8 key as the computer starts and if you see the option to start in VGA mode, choose that. You can then set your display back to a lower resolution.

Feb 01, 2010 | Acer V223Wab Widescreen Lcd Monitor Blk

1 Answer

I am getting a INPUT NOT SUPPORT message for my 917sw AOC lcd monitor. It does work on safe mode I am using windows vista, but when I come back to normal mode, I see the same message again... HELP!!!


The resolution selected in normal mode is not supported by your monitor.
Instead of booting into safe mode, boot into VGA mode - this should allow you to change the resolution - change it to one that works and then you should be able to use normal mode.
Hope this helps, Sherwin

Dec 21, 2009 | AOC 917Sw 19" LCD Monitor

1 Answer

Every time I turn on my computer, the screen shows a box saying not optimun mode reccomended mode blah blah... plz help me solve this!


To fix this you should boot into safe mode and lower your display resolution and then after rebooting into normal mode set it to the LCD's correct native resolution and all should be fine.

Dec 15, 2009 | Samsung SyncMaster 713BM 17" LCD Monitor

1 Answer

OSD LOCKED UNLOCKED Problem


it may be in demo mode, try presing "engine" and selecting normal.

Or press menu and select setup and scroll down to factory reset.

Aug 18, 2009 | LG Flatron L1515S 15" LCD Monitor

1 Answer

POWER SAVING MODE


can you go to safe mode,restart your pc and press F8,go to safe mode,choose admin or your username,see what will happen..

Jun 26, 2008 | LG Flatron L1510S 15" LCD Monitor

1 Answer

Burn in mode


Normally pressing up/down enter should get you out of the burn-in mode.Has the problem surfaced suddenly or some sequence of buttons have got you to this mode?
Samir

Feb 26, 2008 | LG Flatron L1512S 15" LCD Monitor

1 Answer

MONITER


pls press the auto button it will automatically adjust the ratio if it is fail to do that chang the mode by entering in to setup with the help of panel button or if you have mannual just refer it it willl help you.

Sep 22, 2007 | Samsung SyncMaster 710VT TFT LCD Monitor

Not finding what you are looking for?
Hyundai V770+ 17 in.CRT Conventional Monitor Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Computer Monitors Experts

Bob Sloan

Level 3 Expert

2013 Answers

rhodesworks

Level 3 Expert

2572 Answers

Shelly

Level 1 Expert

36 Answers

Are you a Hyundai Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...