Question about HP PSC 2210 All-In-One InkJet Printer

1 Answer

NO SCAN After I press the scan button message says downloading and then cannot retrieve installation list

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 188 Answers

Hi

Please click on the web link given below and perform the steps as given in the web page to fix the issue.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00809848&cc=us&lc=en&dlc=en&product=79499

Have a great day!

Posted on Mar 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do set up my lexmark pro901 to scan to my pc so that I can email the scans


Make sure the Lexmark Pinnacle Pro901 printer driver is installed on your computer. If you have the install disc that came with your printer, just insert it to your computer hard driver and follow the instructions on your computer screen. You can also the download the printer driver from the Lexmark website at http://bit.ly/d3ftso. Select your operating system > download > execute the file. Again, just follow the instructions on your computer screen.
Note: The install disc contains the Lexmark OCR scan software necessary for scanning documents for editing and saving them as PDF files. The downloaded driver does not contain the OCR software.
To scan to your computer using the printer operator panel:

1. From the home screen, navigate to Scan to Computer: Scan > Scan to Computer

2. Touch USB-Connected Computer or the name of a network computer. The local or network computer is the destination that will receive the scan. Wait until the printer has finished downloading a list of the scan applications available on the selected computer.

3. Select an application (in your case your email), and then touch Accept.

4. Select the color, resolution quality and the original image size. If necessary, touch Accept each time you make a selection.

5. Press the start button to start scanning. The scan is complete when the application you selected in step 4 opens on the destination computer, and the scan appears within the application as a new file.

To scan to your computer using the printer software (Lexmark Printer Home):

For Windows:


1. Click Start.

2. Click All Programs or Programs, and then select the printer program folder from the list.

3. Select Printer Home.

4. Choose your printer from the printer drop-down list.

5. Click Email, and then select Photo, Document or PDF.

Note: You can select Document only if an OCR application is stored on your computer. Scanning starts and the scan progress dialog appears.

6. When the scan is finished, a new e-mail message is created with the scanned document automatically attached.

7. Compose your e-mail message. Note: If your e-mail program does not open automatically, then you can scan the document to the computer and then send it through e-mail as an attachment.


For Mac:


1. From the Finder desktop, double-click the printer program folder.

2. Double-click the printer Center to open the All-In-One Center.

3. From the "What is being scanned?" menu on the main screen, select a document type.

4. From the "How will the scanned image be used?" menu, choose To be viewed on monitor/web page.

5. From the "Send scanned image to" menu, choose an application.

6. Click Scan.

7. Retrieve the scanned image from the application, and then send it through e-mail as an attachment.



I hope this information has been helpful.

Sep 19, 2011 | Lexmark Pro901 All-In-One Inkjet Printer

1 Answer

"Cannot retrieve Application List" Error message


plz install drivers of your printer first to your pc.

Mar 19, 2010 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Can't get my 4650 to scan


Hi,
Try the following link http://bit.ly/aLz1xL. You will find specific instructions on how to reset your device and fix the retrieve app list error. Another option is to completely remove the printer and the Lexmark software and then restart the PC, download the driver from the Lexmark.com website and install it, that has helped me before resolve this problem.

Jan 29, 2010 | Lexmark X4650 InkJet Printer

1 Answer

Device monitor application problem


Make sure that the Lexmark Imaging Studio program is running. This was installed when you set up your printer.
If you see the multi-colored icon in your task bar for Lexmark Imaging Studio then try pressing the scan mode button twice. You should be able to scan then.

Sep 28, 2008 | Lexmark X3550 All-In-One Printer

1 Answer

Device monitor application problem


you know some of the operating system if there is a corrupted file or dll some of the printers, USB and other devices in-counter this kind of problem you need to fix first your operating system then after that remove your printer driver and re-install again then then try to scan again..... hope this solution help you...



rate this solution please...

Mar 29, 2008 | Printers & Copiers

3 Answers

Lexmark 5400 series


Problem: Lexmark cannot retrieve applications list

I have the Lexmark X3550 with the WiFi option board installed (makes it same as the model X4550) and get the “cannot retrieve applications list” message on one of the five computers connected to my router (Linlsys WRT54G V8) and using wireless printing and scanning. Just like everyone else with a similar Lexmark WiFi printer/scanner, I can print wireless, but cannot get the wireless scanner to work on one of my PCs.

The fix, in my case, was to change the Lexmark network name as follows.

1. Launch Lexmark Imaging Studio.
2. Right-Click on “View or change network settings”.
3. Enter a new network name in the first box shown. (This box contained the correct network name for my PC, but another name was needed to make the scanner work. I simply added “-lex” at the end of the current network name.)
4. Right-Click OK. You should return to the Imaging Studio screen.
5. Close the Lexmark Imaging Studio window. (The tray icon should remain at the screen lower right.)
6. On the printer, press the Scan Mode button.
7. On the printer’s display screen, select the Computer Name that you entered for the new network name. Just use the arrow buttons until the exact name is shown.
8. Press the Check button. The display screen should show “Downloading Applications List”. Within about 10 seconds the message should change to “ *Scan to Computer ”. Wireless scanning should now work.
9.. Press the Start Color or Start Black button. “Requesting Scan” will be shown. After a few seconds scanning will start. The process is a bit slow.
10. After a while you may see an empty small Lexmark window onscreen. Later, the Lexmark Imaging Studio will appear onscreen, then change to show many options and features. An image of the scanned item will appear in a Lexmark window. Save and/or edit the image. Another scan can be done by pressing the printer’s Check button again. Be sure the correct computer name is shown on the printer’s display.

That’s it. A new computer name was the solution. Your PC and printer may require a restart (power off) after changing the “computer name”.

Regards, Fbyrd

Mar 12, 2008 | HP PSC 2210 All-In-One InkJet Printer

21 Answers

Device monitor application problem


Ok, folk, I have solved this same issue with my Lexmark X4530 and running Vista Ultimate 32 bit. It turned out to be a Windows Firewall issue. I could have just turned off my firewall, but I opted to keep it one and just EXCLUDE all four running processes that the driver loads. Here are the four programs I excluded on my firewall:

C:\Program Files\Lexmark 3500-4500 Series\lxdiamon.exe
C:\Windows\System32\lxdicoms.exe
C:\Program Files\Lexmark 3500-4500 Series\lxdimon.exe
C:\Windows\System32\spool\drivers\w32x86\3\lxdiserv.exe

The above files may be in different locations than what I have listed, especially the last one. The best way to find where these files are running from is to right click on your task bar and choose Task Manager. Click on the Processes tab and look for all the processes running that start with lx....
Righ click on each of those processes and choose Properties. It will display the path the file is located at. In your Windows Firewall, go to the Exclusions tab and then Add Program. Click on the Browse button and navigate to that file and select it and click on OK. Do that for all four processes.

After I excluded all of those files, the printer works exactly like it is supposed to!

Enjoy!

Jan 08, 2008 | Lexmark X5150 All-In-One InkJet Printer

8 Answers

"Scan Request Failed"


Problem: Lexmark cannot retrieve applications list

I have the Lexmark X3550 with the WiFi option board installed (makes it same as the model X4550) and get the “cannot retrieve applications list” message on one of the five computers connected to my router (Linksys WRT54G V8) and using wireless printing and scanning. Just like everyone else with a similar Lexmark WiFi printer/scanner, I can print wireless, but cannot get the wireless scanner to work on one of my PCs.

The fix, in my case, was to change the Lexmark network name in their Imaging Studio application. This worked for several weeks, but now I get the “cannot retrieve applications list” message again. I have not fixed the new error yet, but changing the network name may work for you. Here are the steps to change the Imaging Studio network name.

1. Launch Lexmark Imaging Studio. (Double left-click on its icon)
2. Left-Click on “View or change network settings”.
3. Enter a new network name in the first box shown. (This box contained the correct network name for my PC, but another name was needed to make the scanner work. I simply added “-lex” at the end of the current network name.)
4. Left-Click OK. You should return to the Imaging Studio screen.
5. Close the Lexmark Imaging Studio window. (The tray icon should remain at the screen lower right.)
6. On the printer, press the Scan Mode button.
7. On the printer’s display screen, select the Computer Name that you entered for the new network name. Just use the arrow buttons until the exact name is shown.
8. Press the Check button. The display screen should show “Downloading Applications List”. Within about 10 seconds the message should change to “ *Scan to Computer ”. Wireless scanning should now work.
9.. Press the Start Color or Start Black button. “Requesting Scan” will be shown. After a few seconds scanning will start. The process is a bit slow.
10. After a while you may see an empty small Lexmark window onscreen. Later, the Lexmark Imaging Studio will appear onscreen, then change to show many options and features. An image of the scanned item will appear in a Lexmark window. Save and/or edit the image. Another scan can be done by pressing the printer’s Check button again. Be sure the correct computer name is shown on the printer’s display.

That’s it. A new computer name was the solution. Your PC and printer may require a restart (power off) after changing the “computer name”.

Regards,
Fbyrd99

Oct 23, 2007 | Lexmark X3550 All-In-One Printer

Not finding what you are looking for?
HP PSC 2210 All-In-One InkJet Printer Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...