Question about Champion 2000+ Household Juice Extractor

2 Answers

Juicer no longer works !

Hello there, I recently used my juicer and while it was still turned on, I then unplugged it for what ever reason at the time. since i have done this the juicer does not turn on. have I shorted out something or damaged the motor in anyway? any help would be great! thanks so much. mike.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Had same problem...juicer stop working without any warning. First I took the unit apart and remove the on-off switch and capacitor and had them tested by appliance shop. Both checked good. Next I remove the small circuit board behind the face plate below the motor shaft; circuit board was coated with oil and shaft grease. Appliance shop did not know how to test it, so I clean it all up and reassemble the unit. I told God is it worked I would praise Him. Hallelujah to God ... it worked. I hope my experience helps someone. God is good.

Posted on Nov 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 173 Answers

The motor uses a tiny fuse in the windings and it might be hard to find and rated up to 15 amps... it blows sometimes for no reason and especially on cold starts.
also the on-off switch wears out.. and lastly the ac cord breaks inside from stretching too much.

Posted on Apr 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No longer turns on


check the motor some juice might have been inside of motor has 2 brushes need to work prpoerly on 110 vac rated at 10 amps or better. clean your machine look for signs inside not on the city streets..

Mar 25, 2014 | Waring JEX 328 Health Juicer

6 Answers

Jack Lalanne Power Juicer250


the power is not properly supplied to blade .....just check whether the connections are proper ....

Aug 09, 2008 | Jack Lalanne Power Juicer 250 Watts

1 Answer

I was just given a juicer and on the left hand side there is the know for turning on and off. I try to turn it and it will not budge, therefore I cannot juice anything. Is there a reason for this??


The metal handlebar needs to be snapped up into position on top of the juicer beside the feeding chute before the button will turn. It's a safety feature. The clear plastic lid goes on over it.
Hope this helps!

Jul 28, 2011 | Krups FSC111-70 300 Watts Juicer

1 Answer

Hello, I just received my omega 8006 and it wont turn on


This juicer has a 15 year warranty which you can contact the manufacturer or retailer you bought it from depending on their return policies and exchange it.


http://www.omegajuicers.com/juicers/masticating-juicers.html

Mar 16, 2011 | Omega Juicers 8006

1 Answer

Acme 6001 juicer. Excessive vibration and movement during use.


usually the vibrations are caused by improper assembly ( it does not take much ) or the rate of feeding material into juicer. feed the juicer too fast and it gets out of balance.

Jan 04, 2009 | Acme 5001 Supreme Juicerator Juice...

2 Answers

Power juicer not working


Hi my name is patricia you probably have to have the handle bars on or up so it can be tight and then the motor will run.

Aug 27, 2008 | Jack Lalanne Power Juicer (Stainless...

1 Answer

Champion juicer don't work


You have to have the juicer attached, there is a little magnet that allows the machine to turn on.

May 23, 2008 | Champion 2000+ Household Juice Extractor

1 Answer

Juicer stopped working


Fuse may be blown. Take off bottom, it is soldered to the circuit board. Unsolder and replace (I use a fuse holder) to make it easier

May 07, 2007 | Breville JE95XL Juicer

10 Answers

Champion Juicer stopped working


Hi I had the same problem yesterday and emailed Champion Juicer about the problem here's their reply below, his suggestion worked. Hello Duane, Your machine is equipped with a magnetic start system which will only allow the machine to start when you have the screenholder all the way in place just as you would have it to start juicing. If you do not have any parts on the machine it will not start. Please assemble it again and give it a try. If it still wont start call me at 209-369-2154 for further assistance. Thank you Carl

Nov 09, 2006 | Champion G5-PG-710 650 Watts Juicer

Not finding what you are looking for?
Champion 2000+ Household Juice Extractor Logo

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Champion Juicers Experts

Phillip Hicks
Phillip Hicks

Level 3 Expert

890 Answers

Bill Boyd

Level 3 Expert

33160 Answers

Are you a Champion Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...