My blue is printing green How can I fix this?

Maybe you should clean it :)

If Green is printing as blue, you are not getting any yellow ink. Blue + Yellow make Green.

Please check to make sure you are not out of ink in the yellow cartridge and that the nozzles are clean.

Possibly it is running low on Blue ink - because colors are usually a mixture of inks - for example green is made from blue and yellow - if an ink runs low it will print the available colors or substitute the next available color.Probably if it prints green yellow - then it has no blue available to make the right shade.

hi..Any one of the software file might have got
corrupted.Reinstall it again.
try this out..
thank u..
kindly rate my response..

I think your cartridge is defective, you need to replace a new cartridge.

Most probably your ink color RED and BLUE has run out. Refill/replace the color ink may help to solve your problem.

YBC (/\)

Go to the Canon Web site http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=232&modelid=8047 (may have to copy and paste into browser. I believe it is either a Print head (7 flashes) which will require repair/replacement of print head - or - a waste ink error that requires a reset. There are other posts on this site that explain how to get the printer into service mode to reset.

replaced ink cartridges..error message appears now telling me to re align printer..can you tell me how to do this

Find out how to print a test page, then print one and check for problems. With luck, printing the test page will fix the problem...

Do you have the operators manual? Run it through a cleaning cycle. Also Xerox's website will guide you through some maintenance steps. If you are using generic wax, you may have clogged the jets.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de