Question about Sony KP-61V80 TV

1 Answer

Cable connection Tv works find all inputs are fine. Suddenly my cavle connection goes in and out of signal

Posted by on

  • k w
    k w Jan 30, 2008

    Yes cable conn is good hooked it direct and with box. tried another tv too

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

If you can, try another TV hooked up there and see if it's still bad. If it is, you need to call your cable company.

Posted on Jan 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Sony Wega Trinitron HDTV Blue Screen with Sound


Had similar problems with HD cable on dvd. swapping with another cable solved the problem.

Aug 11, 2009 | Standard (CRT) Televisions

4 Answers

Suddenly, "No Signal" display when cable box/VCR Connected to UHF/VHF Jack


How long have you owned the tv? You have two options though your best bet is to locate your nearest authorized service center to have the tv repaired.
Thanks,
lee

Sep 14, 2008 | Sony KV-27FS13 27" TV

2 Answers

VCR/DVD & Samsung TV: "weak or no signal"


Take the VCR remote, check VCR output settings ( scart1, scart2 , RCA) and signal format (PAL) etc

Jul 26, 2008 | Samsung TX-T3093WH TV

1 Answer

Element FLX 3210 not scanning for cable channels


YOU HAVE A BAD TUNER OR RF INPUT. IF YOU CONNECT THE CABLE TO THE VCR AND THEN USE THE VIDEO OUTPUT OF THE VCR TO THE VIDEO INPUT OF THE TV YOU CAN USE THE TUNER IN THE VCR TO CHANGE CHANNELS.

Jan 10, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

No Signal


I connected the cable to Ant-A, then connected a short cable from the out loop to Ant-B. Works fine. Didn't have a manual, had no idea.

Sep 05, 2008 | Mitsubishi WS-55807 TV

1 Answer

Still no RF signal


Have you checked your Input making sure you are set to the correct imput? DTV vs DVD?

Jun 21, 2008 | Panasonic CT-32SL14 32" TV

2 Answers

Black screen


my sony kp-61hs30 displays that there is no siginal, also the red indicator light blinks when the power is turned on but goes out i have dirct cable pluged into the set and up until about a week ago it worked fine.All of the other tv's in my home work fine so i don't understand what the problem is . I have a dvd player connected to the set and it works great for viewing dvd's please assist with me with some trouble shooting points

Jan 24, 2008 | Sony KP-61HS30 TV

2 Answers

Multiple video inputs


Unfortunately, you cannot use the connectors at the same time. The S-Video connector overrides the standard video connector. This is why they share common audio left/right inputs. If you could use them separately, they would each have their own set of audio inputs. (S-Video does not carry audio signals on the cable.) I'm assuming that you are connecting your Satellite as an input to your VCR, and then your VCR to the TV via a video connection. The VCR passes the satellite signal through unless you are watching a tape, then it overrides the dish signal. You have a few choices here: 1. You can connect the coaxial (RF) output from the VCR to the TV, and watch the satellite and VCR on channel 3 (or 4). You can then connect the DVD via S-Video, and watch it on "video". This is the simplest solution, and provides the best picture quality for the DVD (with this TV), but lower quality for the dish and VCR. 2. You can connect the DVD player via RF (if it supports that), watch the DVD on channel 3, and connect the VCR via video. This will make the DVD picture quality terrible. 3. You can replace the VCR with a combo DVD/VCR unit. You can then connect the S-Video out from the combo unit to the TV. This is a more expensive solution. 4. You can replace the TV with a model that includes more inputs. This is the most expensive solution, but will allow you to watch your DVD over component cables (very high quality) and VCR and dish over S-Video. Ironically, the obvious choice, connecting the DVD as an input to the VCR (as a pass-through) simply WON'T WORK. The signal put out by the DVD player is "copy protected" (using a system called MacroVision) which the VCR will refuse to play, even as a pass-though. Best of luck with this. Given that you are trying to make this all work without replacing equipment, I recommend option #1, until you decide to break down and buy a shiny new HDTV. They are coming down in price every week, but only you can decide when the time is right.

Mar 22, 2007 | Sony KV-32S26 32" TV

2 Answers

Model 2780R intermittant Picture & Sound Failure


The set has loose power conections to the tuner and judging by the model it might have other loose conections in the chassis,the loose conections need to be resoldered and might not be easy to find,try taping the side of the set to see if it reacts while is doing the problem.Be safe and call a technician unless you are familiar with tv service.

Sep 20, 2006 | Sony KV-27FV16 TV

2 Answers

No Picture, sound is all static


Make sure the ant. input switch didnt change and check the ant. connections If that dosent work sounds like a defective tuner.

Mar 30, 2006 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Sony KP-61V80 TV Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...