Question about Eiki LC-XB28 XGA LCD Projector Multimedia Projector

1 Answer

Problem with Vibrating

For several months, it seems like our projector is vibrating. Actually, the words on the last quarter of the screen are vibrating (shaking) back and forth. The hardware mount has been checked for tightness and the filter has been cleaned. This projector is in the rear of the church. It is not close to any speakers. Has anyone else had this problem?

Posted by on

  • 1 more comment 
  • sandracox Jan 31, 2008

    Can the fan be cleaned by a nonprofessional?

  • sandracox Jan 31, 2008

    What is the local area? I'm in Asheboro, NC.

  • sandracox Feb 01, 2008

    Afraid not. I'm in Asheboro, North Carolina. Plans to be near here anytime soon?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 261 Answers

It could be an internal fan that is dirty or Just going bad. Hopefully this helps you...Let me know if i can be of anymore assistance. Also you can ship projector to me and i can look at it here. I am located in Louisville, Kentucky. Let me know. Thanks Jay

Posted on Jan 31, 2008

  • Jay Henderson
    Jay Henderson Jan 31, 2008

    Yes, Just use a can of compressed air. But if the set is a LCD then it can be a little tricky. Are you in the local area? Keep me posted. Thankyou again . Jay

  • Jay Henderson
    Jay Henderson Jan 31, 2008

    I was just wondering if you were near Louisville, Kentucky. That is my local area.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Infocus 3916 Projector goes in and out of focus. It is a little less than 2 years old. Any suggestions for a solution?


Many of these projectors have a manual focus, and an auto focus. Make sure the auto focus is turned off in the menu options.
Then make sure the manual focus is not moving on it's own from vibration of the cooling fan. You can check this by manually focusing the projector, then taking a marker and marking a line on the focus wheels. If the projector goes out of focus, check the line you made and see if it has moved, if so. Your projector is going out of focus from vibration of the cooling fan, or the surrounding environment.
If your projector is mounted to the ceiling you can add a couple of rubber washers between the projector and the mounting bracket to cut down on vibration.
If your projector is sitting on a desk / table / ground, you can use foam padding to keep it from vibrating.

another solutions would be to temporarily tape the adjusting knobs while the projector is in use.
If your projector has a protective cap that is put on the lens when not in use, this will also push the lens out of focus, and will need to be re-adjusted each use.

Nov 20, 2014 | InFocus Office Equipment & Supplies

1 Answer

Dell 3200MP DLP Projector: displays OK, but with vibrations soon as power button is pressed ON. found cause; rotating see thru thin plastic disk has a quarter of the disk broken off, thereby causing...


You need a replacement color wheel (that is the name of the broken plastic disc, likely glass). I have been unable to source one. Recommend you buy a used projector with a bad lamp, usually less than $100 on eBay and just put your good lamp into it. Keep your old one for parts.

Jul 04, 2011 | Dell 3200MP Multimedia Projector

1 Answer

The projector does not show the color red. It shows it as black or on a black background shows nothing at all. Can you help?


It could be 3 things--
1. You need a new cable
2. This is unlikely, but the red segment could be off the colorwheel, but if this was the case the wheel would be way out of balance and the projector would be vibrating like crazy.
3. The "color ramps" or colorwheel index in the hidden factory menu may need to be adjusted.

Sep 15, 2010 | InFocus LP70+ Multimedia Projector

1 Answer

The colors seem out of focus. Blues and yellows don't seem to match. For instance, if I have words projected, it's like I have a blue word with a yellow shadow of the word. And there is a band of blue...


sounds like you have ghosting, this is not adjustable unless you can get into the hidden menu and then you have to know exactly what you are doing. Or the LCD ribbons have come loose. The easiest thing to try is reflashing the software.

May 18, 2010 | InFocus Proxima UltraLight LS2 Multimedia...

1 Answer

Hello there Not sure if the weekend is a good time but anyway anything is worth trying at this stage! There appear to be two fans, the one that cuts in when the lamp comes on - the one that sounds more...


Hi,
Vibrating fan requires lubrication on its shaft, drop little thin machine oil and hope problem will be solved, for time being.
Correct solution is to replace that fan.
Thanks.

Feb 13, 2010 | Toshiba TDP-T90 Multimedia Projector

2 Answers

Optoma DV10 loud vibration and odd colours


check the colour glass wheel is shattered with a piece of glass still stack to the wheel. it not even thats why it vibrates

Aug 17, 2009 | Optoma MovieTime DV10 DLP Projector

2 Answers

Large dot in the middle of the projected display


there is a burned-in spot on the polerizer light filter for the blue lcd. it makes sure the light is blue coming through, that's why it is black on a blue screen, and yellow when the red and green are the only light showing through. it needs to be replaced. pat # PFiLW0213CEZZ.

May 21, 2009 | Sharp XG-E3500 Multimedia Projector

1 Answer

TDP-S20


Click the 2 box on the display settings and put a check mark ano the box that is say to extend the view on to this monitor. Hope this Helps.

Jun 17, 2008 | Toshiba TLP S30 Multimedia Projector

1 Answer

Dramatic increase in fan noise


Hi there

If you place your hand on the machine and you can actually feel the vibration , you might be looking at a faulty Colourwheel.

If not , try cleaning the fans by blowing it out. If the problem still occurs you might have to replace the fans.

Dec 05, 2007 | Optoma H56 Multimedia Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eiki Office Equipment & Supplies Experts

Jaime Hernandez

Level 3 Expert

2278 Answers

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

M.R.C

Level 1 Expert

35 Answers

Are you an Eiki Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...