Question about Uniden Cordless Phone

1 Answer

Security code I have this model phone but do not have the manual anymore. I would like to know how to set the security code to use when accessing my messages from another phone.

Posted by on

  • Ralph Weber
    Ralph Weber Jan 30, 2008

    I believe the model is GE-27851GE1

  • martin hogg May 11, 2010

    The only information we have been given is that the phone is a GE cordless........we will need the model number as there are lots of GE phones around............thanks.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 146 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden DECT6.0 Model D1680 Problem: Need to change recorded message ,cant get past Security Code_ a 2 digit pin .Forgot what is was..


The only time the Security Code is used is to effect
Remote Access, ie, "call home and manage your
answering machine messages remotely" by pressing
the code numbers while the Greeting is being said....

The Security Code is set on the D1680 from the handset
by this procedure:

press [menu]
scroll to "Ans. Setup"
press [select]
scroll to "Security Code"
press [select]
the code will be displayed, first digit blinking
(enter a new digit if you want to change it )
the code will be displayed, second digit blinking
(enter a new digit if you want to change it )
press [select] (chirp) press [END}

All of the Answering Machine System functions can
be managed remotely, and voice menus are provided
to guide you in these operations.

Entering the model number found on a small sticker under
the battery in the handset at www.manualslib.com will
fetch a free copy of the User's Manual in case the original
has been misplaced.

Good luck!

---

Apr 01, 2016 | Uniden D1680 Cordless Phone

1 Answer

How do I delete messages?


No password is needed from a handset or at the base.

A "security code" is needed to effect "Remote Access"
whereby a caller can get into & manage the Answering
Machine System.

You can access / change the security code by:

press [menu]
scroll to [Ans. Setup]
press [select]
(Ans. Setup)
scroll to [Security Code]
press [select]
(code numbers blinking) enter desired digits
press [select] (chirps) press [END]

The model number for your cordless phone is shown on
a small sticker underneath the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual which describes all of the
many features of the Answering Machine System .
Good luck!
-----------

Oct 21, 2015 | Uniden Lands Phones

1 Answer

I need to know the security code for this machine which allows me to access my messages from another phone.


Since you declined to specify the model of your VTech answering machine, enter it into the search box at
http://www.vtechphones.com/vtechphones/index.cfm/support/general/manuals/
to get a copy of the manual.

Jun 08, 2011 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

Hello I was wondering how to use the VM acess with my phone. I want to be able to call from a different number and listen to my messages how do I go about doing so


I have a similar model. You need to configure a remote access code on the phone. Then, when you call your phone, you enter the pin after your message starts.

(From the manual)
Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit's voice guidance prompts you to press certain dial keys to perform different operations.

Remote access code:
A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default
setting is "111".

Important:
To prevent unauthorized access to this product, we recommend that you regularly change the remote code.
1 {MENU} {#} {3} {0} {6}
2 Enter the desired 3-digit remote
access code.
3 {SAVE} {OFF}

Below is a link to the manual. The remote access instructions are on page 35.
http://static.highspeedbackbone.net/pdf/KXTG4031-MUL.pdf

Mar 05, 2011 | Panasonic KX TG4031 Cordless Phone

1 Answer

I have a ge 25861ge3 answering system and would like to be able to check messages remotely but don't know how to set a code HELP


The default security code for accessing the answerer from another location
is 1 2 3. You must use the handset to change the security code. With the phone OFF (not in TALK mode), follow these steps:
1. Press trans/answerer button.
2. Press *exit.
3. Enter the three numbers to be used as the new security code.
4. Press *exit again.
5. You will hear the new security code being repeated to confirm the change.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25861_CAN_EN_CL_IB.pdf

Feb 11, 2011 | GE 25861GE3 Phone

2 Answers

I want your phone locker?


Hello,

You can set up a security code to lock your Nokia 6288 keypad in case a thief tries to call from your stolen phone

Published on Mar 14, 2007

You can set up a security code to lock your Nokia 6280's keypad in case your phone opens in your pocket and calls one of your contacts, annoying them and potentially running up a huge bill.

The code will also stop a thief from using your stolen Nokia 6280 to run up a huge phone bill before you can alert your network provider.

To set the security code, click Menu > Settings > Phone > Security keyguard. You'll be prompted for the Security code. By default this is 12345. Enter this and press OK. Select On and click Select to see the message 'Security keyguard activated'.

Now when you slide your phone shut and press Lock, you'll see the message 'Keypad locked with security code'.

When you slide it open, you'll be prompted to enter the security code. Type your code and click OK to activate your keypad.

Of course, if any potential phone thieves are reading this, they'll now know the default security code is 12345.

To change the security code, go to Menu > Settings > Security > Access codes > Change security code. When prompted, enter your current security code and click OK. The enter your new security code (a PIN between 5 and 10 digits in length), click OK and enter the new code again to verify it. Click OK and you'll see the message 'Security code changed'.
Hope this helps.

Jan 12, 2011 | Nokia Lands Phones

3 Answers

I left my Vtech phone in New York, left for Europe and forgot to set the answering machine on. When I call in I get a factory recorded announcement that I'm not available, etc. I have my PIN # with me,...


Can you please specify the exact model of the phone? Because the steps in accessing it remotely varies from model to model. Anyway, you can try to follow the steps posted here and then test:

Remote operation allows you to control the functions of the Answering System when you
are away from the Base,and call from an outside telephone line. The Answering
System cannot be accessed from another telephone on the same line. You can access
many of the Answering System functons from a remote location, such as listening to
messages, changing recorded announcements, and recording memos.
Remote operation can only be accessed from a touch tone telephone. If the remote phone
is set to pulse dialing, switch it tone. If tone dialing is not available, you will not be able
to access the Answering System.
Note: All function codes should be entered within 2 seconds in order to activate Remote
Operation.
To Activate Remote Operation From a Different Telephone Line
1. If the Answering System is OFF, you can dial your telephone number and wait for
the Answering System to answer your call after 10 rings. An announcement, "Please
enter your security code" is given, and you enter your security code to use remote
operation.
2. If the Answering System is ON, it will answer your call and begin playing the currently
selected announcement (as with any incoming call).
3. Enter # followed by your 2 digit security code during the announcement. The
default security code is 19.
4. Once the security code is received, a double confirmation beep will be given, and
you are in Remote Operation mode. You can then control the Answering Machine
functions using the telephone keypad.
5. The user can also enter the Remote Operation mode during message recording. The
procedure is the same as step 3. The recording will be stopped after entering the
valid security code "s#xx " and the incomplete message will be deleted. If " 0s"
is entered, the Answering System will release the line, but the recorded message
will still be retained.
6. If the user enters a wrong security code, the system will release the line.
Playing Messages Remotely
1. Press " #1 ", " #2 " or " #3 " on the touch tone keypad to play the messages in the
corresponding mailbox.
2. The system will announce "Mailbox X. You have XX new messages and XX old
messages" and the system will playback the new message only. If there are no new
messages, the system will announce "Mailbox X. You have XX old messages. On
the other hand, in the absence of old messages, the system will announce only the
number of new messages.
Repeat Messages During Playback
1. Press "#4" once during message playback to repeat the current message.
2. Press "#4" twice within 2 seconds to skip to the previous message.
Skip Messages During Playback
1. Press "#6" once to skip forward to the next message.
Stop Message Playback
1. Pressing "#5" during message playback will stop playback.
Deleting Messages
1. Press "#9" once during message playback to delete the current message.
Note: Playback will pause if "#" or " " is entered. Answering System will wait for the
command in the following 2 seconds. If no further tone is entered, playback will be resumed.
Memo Recording
1. Press " 8".
2. After selecting the mailbox by entering command "1", "2", "3", You will hear, "Now
recording", followed by a beep.
3. Enter "#5" to stop recording when you have finished.
Change OGM Remotely
1. Enter " 7" to record a new OGM. You will hear, "Now recording", followed by a
beep to signal start of recording.
2. Press "#5" to stop recording. Your new OGM will playback automatically.
Check OGM1 Remotely
Enter "#7" to review OGM. You will hear playback of OGM followed by a beep.
Turning Answering System ON or OFF
Pressing "#0" toggles the Answering System ON/OFF. "Answer machine on", or "Answer
machine off" will be announced, followed by a beep.
Voice Menu for Remote Operation
The system provides two pre-recorded voice menus to help you during remote operation.
Press " 5", and you will hear the simple voice menu.
The simple voice menu is as follows:
• Press "#1" to play mailbox 1.
• Press "#2" to play mailbox 2.
• Press "#3" to play mailbox 3.
• Press "#5" to stop.
• Press "#4" to repeat the message.
• Press "#6" to skip the message.
• Press "#9" to erase the message.
• Press " 5" for other functions.
(To advance voice menu)
The advanced voice menu is as follows:
• Press "#7" to review outgoing message.
• Press " 7" to record outgoing message.
• Press " 8" to record memo.
• Press "#4" twice to repeat previous message.
• Press "#0" to turn the system on or off.
• Press " 5" to return to the simple voice menu.
Pressing any function code will stop the voice menu, and perform the corresponding
functions.
Exiting Remote Operation
1. Enter " 0" on the touch tone keypad to exit remote operation mode. The Answering
System confirms your action with a long beep and then disconnects.
2. The Answering System also automatically disconnects if no key is pressed within 20
seconds during remote operation.

Oct 17, 2009 | Vtech Two Line Digital Answering Machine...

1 Answer

HOW TO RETREIVE MY MESSAGE FROM ANOTHER PHONE?


Most answering machines have a 'remote code' to access messages via remote. (from another phone line when you aren't at home.) Look for the manual or look on the bottom of the unit itself.

If you do not see a code for it. Or have the manual, find your model online and the manufacturer should have the user manual online for free. It should provide the code for remote access.

Typically, you call the phone, when the answering machine picks up, you would dial the security code and the answering machine will then start playing your messages.

Hope this helps. Good luck!

Jul 30, 2009 | Bell Northwestern Phones - DigiMate...

1 Answer

How to access voice mail when I don't know security code


An IT person, retained by the client, changed the security code for me.

Feb 17, 2009 | Toshiba DKT3010S Phone

1 Answer

How to turn off the security feature on my phone


The default remote access code is 19

see page 30 in the manual I sent you. turning the security off would allow anyone to listen to your messages are you sure you want todo that? so far I don't know how is that done or even possible.

Aug 16, 2008 | Lands Phones

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

98829 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7993 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...