Question about Computers & Internet

1 Answer

Problem with iphone Firmware version is 04.02.13_G for V1.1.2

Hi i bought an i phone in uk london i am in india i bought Item Title: NEXT SIM UNLOCK 1.1.2 OTB IPHONE Stealth Sim for Iphone its showing as INCORRECT SIM the iphone must be used with an approved sim. now what to do plz help me out.this is the card i haved
used or plz check in www.Dotconsole.com.in these site its mentioned us .uk,and etc,can be used

Comment by sureshkhatri, posted on Jan 29, 2008 can u solve this problem in my iphone showing message is INCORRECT SIM THE IPHONE MUST BE USED WITH AN APPROVED SIM.

Posted by on

  • hemant105 Jul 12, 2008

    hi im in india im restore my iphone with 1.1.2 to 1.1.4 and unlock it successfully.

    after unlocking the sim will no working it says NO SERVICE

    i decided to restore in 1.1.2 firmware when i restore i will unlock fron ZIPHONE but it says INCORRECT SIM THIS IPHONE MUST BE USED WITH A APPROVED SIM

    PLZ HELP ME WAT CAN I DO

    THANKS

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 265 Answers

The software (firmware) in an iPhone is designed to detect (indeed reject) tampering. It is only available (full-featured) in the United States of America. Apple is planning on marketing other countries, but hasn't done so yet. Until they do, the most reliable 'fix' for your issues will be from hackers, most of whom aren't the least bit reliable. The most you'll be able to do is use it as a phone and send and receive text. Most of the high-tech features that make an iPhone desirable won't work until the network supports it, even if you do find a way to hack the software. Many users in the USA have found that hacking their iPhone has made their phones useless, since the system is designed to detect and reject service requests from iPhones using pirate software.

Posted on Jan 31, 2008

  • Aimiel Ireman Aug 14, 2008

    Did you get your iPhone working now? It is possible to get it working, if you go to an Apple store or a cellular carrier that supports iPhones in your country.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only vodafone sim worked but airtel sim not working


HI is your phone working with only vodafone sim then it mean it is locked to vodafone due to this you can't use that phone with other network sim until you unlock it .You can easily unlock your phone using sites like http://www.mobileunlocksolutions.com/supported-phones/rs1wp7/ here they are rendering unlock code for all mobile models at reliable cost .After purchasing the code visit Mobile Unlock Guide here they are rendering free instruction guide about how to input code in your mobile to unlock it ....

Jan 09, 2014 | Computers & Internet

1 Answer

Puk# for Samsung SGH T105G



These directions are for an AT and T phone, but other than that would be the same for any carrier.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card.

You can obtain your phone's PUK code from your carrier in one of these ways:

Log in to Your account.online

Use a Technical Support Chat

Contact your carriers Customer Care

Get Your Phone's PUK Code Online

Go to the Phone/Device page.

From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading.

The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card.

Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

Sep 18, 2011 | Samsung Modem Configuration Software...

1 Answer

London zipcode


fOUND THIS IT MAY HELP YOU OUT OK. tHANKS TO AL ON yAHOO FOR THIS ANSWER. ************************************************************************************** I live in London W11 2BQ. As no other English city has codes starting with a W, you don't need to write "London". Writing "W11 2BQ" tells the Post Office it is in London. It is implicit.

We call that a postcode and it defines my street unambiguously, A code indicates on average 14 properties (and the various flats within them)

The structure of a London postcode is

(a) a point of the compass (no S and no NE)

(W N E SW NW SE and WC = West Central, EC = East Central)

(b) a district within that point of the compass - there can be between 10 and 30 districts per point of the compass (but less for
WC and EC)

Thus W11 = Notting Hill south of the overhead motorway, W10 = Notting Hill north of the overhead motorway. W2 = Paddington, W6 = Hammersmith,

These postal districts have existed since the mid 19th Century. What turns them into a postcode is the more recent addition of ...

(c) a digit (0-9) and 2 letters, Permissible letters are ABD EFG HJL NPQ RST UWX YZ (excluding CIK MOV), These could give you 10 x 20 x 20 (= 4,000) possibilities,

These define which street we are talking about,

The system establishing postcodes throughout the UK, which involved adding on street codes to the existing London postal districts in which they are located, was gradually introduced nearly 50 years ago in the UK, under the advertising slogan "You are not properly addressed without it!".

The first two parts of the London postcode are collectively known as the outward part of the code (they get the letter to the right sorting office) and the third part knwn as the inward part of the code, as they tell the sorting office into which postbag of which walk the letter should then be placed.

Wikipedia says ...

A postal code (known in various countries as a post code, postcode, or ZIP code) is a series of letters and/or digits appended to a postal address for the purpose of sorting mail.

Germany was the world's first country to introduce a postal code system in 1941. The United Kingdom followed in 1959 and the United States in 1963.

The majority of the world's national postal services have postal code systems. A few do not: for example, Ireland, although a national postal code system will be introduced in 2008. Hong Kong and Panama do not have postal codes.

American zip codes are 5 digits. i.e. numbers only. Finland too. In Finland the first two digits show the postal area and the last three digits represent the particular post office in the area. Corporations receiving large amounts of mail may have their own postal code. The special postal code 99999 is Korvatunturi, the place were Santa Claus (or Joulupukki in Finnish) is said to live.

Most postal codes are numeric. The few countries using alphanumeric postal code systems (with letters and digits) are: Argentina. Bermuda, Brunei, Canada, Jamaica, Malta, The Netherlands, United Kingdom, Venezuela

But the UK is wavering.

UK postcodes are alphanumeric and between six and eight characters in length (including a single space character used to separate the outward and inward parts of the code). For example the post code for the House of Commons is SW1A 0AA. These codes were introduced by the Royal Mail over a fifteen year period from 1959 to 1974.

However, as the format of the codes does not achieve its objective of primarily identifying the main sorting office and sub-office they have been supplemented by a newer system of five digit codes called Mailsort. Mail users who can deliver mail to the post office sorted by mailsort code receive discounts, whilst delivery by postcode does not provide any such financial incentive.

LONDON

In the London area postcodes are slightly different, being based on the old system of 163 London postal districts and predating by many years the introduction of postcodes in the 1960s:

In central London, WC and EC (West Central and East Central)

In the rest of London, N, NW, SW, SE, W and E.

The London postal districts rarely coincide with the boundaries of the London boroughs (even the former, smaller metropolitan boroughs). The numbering system appears arbitrary on the map: for example, NW1 is close to central London, but NW2 is a long way out. This is because (after starting with 1 for the area containing the main sorting office) they were numbered alphabetically by the name of the main sorting office.

The area covered by the London postal districts was somewhat larger than the County of London, and included parts of Kent, Essex, Surrey, Middlesex and Hertfordshire. In 1965 the creation of Greater London caused this situation to be reversed as the boundaries of Greater London went far beyond the existing London postal districts.

Those places not covered by the existing districts received postcodes as part of the national coding plan, so the postcode areas of "EN" Enfield, "KT" Kingston upon Thames, "HA" Harrow, "UB" Uxbridge", "TW" Twickenham, "SM" Sutton, "CR" Croydon, "DA" Dartford, "BR" Bromley, "RM" Romford and "IG" Ilford cross administrative boundaries and cover parts of neighbouring counties as well as parts of London.

A further complication is that in some of the most central London areas, a further graduation has been necessary to produce enough postcodes, giving codes like EC1A 1AA.

While most postcodes are allocated by administrative convenience, a few are deliberately chosen. For example in Westminster:

SW1A 0AA - House of Commons
SW1A 0PW - House of Lords, Palace of Westminster
SW1A 1AA - Buckingham Palace
SW1A 2AA - 10 Downing Street, Prime Minister and First Lord of the Treasury
SW1A 2AB - 11 Downing Street, Chancellor of the Exchequer
SW1A 2HQ - HM Treasury

So now you know how to write to the Queen and to Tony Blair! And to write to Santa Claus. the postcode for correctly addressed letters to Santa is SAN TA1.

TRIVIA

Why no NE or S?

There are no London postal districts labelled "NE" or "S". These were in the initial division but were later removed as they were considered unnecessary.

Following a report by Anthony Trollope (1815 – 1882) one of the most successful, prolific and respected English novelists of the Victorian era) in 1866 most of the NE district was transferred to the E sector; the rest was left without a letter designation until the introduction of the IG and RM postcodes almost a century later (though only a part of the area covered by these new codes was in the old NE London district). The S sector was divided between SE and SW in 1868.

The NE and S codes have since been applied to Newcastle Upon Tyne and Sheffield respectively. Both of them major centres of population. Source(s):

Jul 12, 2010 | Computer Associates...

1 Answer

Hi, I have purchased 'Norton AV 2008' from circuit city, USA last year and installed in my system in India this year (22nd of this month). Is there any probelm ?? After installation It is showing...


Do you have to go to the Norton site to register? Maybe the server has changed, see if you can find a better one in the settings (maybe- I dunno this particular product). You might have to manually download the definitions, or you may be blocked because you are in India, there should be info on Norton's site.

Aug 26, 2009 | Symantec Norton Antivirus 2008 Full...

2 Answers

IPhone 2G hangs at "slide to unlock" - restore not helping


its not a hardware problem brothe as i am also facing same problem...actually it all happen with jailbreaked iphone...ad i'hv checked its deep root directory there an application called "lockdown" is the main cause of that...nd still there is no crack of that.....
two days back i unlocked my iphone 2g it was working properly before that i was facing the same issue as you are facing....but now again it went to the same problem....
i hav a temp solution of that...
use blackra1n u can find it from blackra1n.com
nd for few seconds slide to unlock will work
or u can use it by connecting it with ur itunes ...connect usb wire nd slide it again nd again...u can unlock it..bue its just temp

Feb 04, 2009 | Computers & Internet

1 Answer

I just instaled a Versa check gold 2008, and now I can to print


Hi i want equivalent code in c#

dvColumns = New DataView(schemaColumnsTable)
dvColumns.Sort = "ORDINAL_POSITION"
DT.Columns.Add("COLUMN_NAME")
DT.Columns.Add("DATA_TYPE")
DT.Columns.Add("Length")
For i = 0 To schemaColumnsTable.Rows.Count - 1
drow = DT.NewRow
drow("COLUMN_NAME") = dvColumns.Item(i)("COLUMN_NAME")
If CType(dvColumns.Item(i)("COLUMN_NAME"), String) = "Quantity" Or CType(dvColumns.Item(i)("COLUMN_NAME"), String) = "Cost" Then
drow("DATA_TYPE") = "Float"
Else
drow("DATA_TYPE") = "Varchar"
End If
' drow("DATA_TYPE") = "Varchar"
drow("Length") = "255"
DT.Rows.Add(drow)
Next

Jan 17, 2009 | G7 Productivity Systems Versacheck Gold...

2 Answers

Setting up kids clothing consignment store on quickbooks retail 2


If you go into each non inventory item and mark it as used inassemblies or performed by a subcontractor, it will allow you to track your cost versus what you sell it for.
Setting up your books correctly is tough if you don't have accounting experience. Let me know if I can help

Nov 26, 2008 | Intuit QuickBooks® Premier Retail Edition...

5 Answers

I NEED INLOCKED CODE FOR SAMSUNG SGH-A127


I suggest you to follow these steps as i'll mention it right here.It works for all sangsung



First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad
*2767*3855# (wait 10-15 seconds) phone will reboot(restart)
When phone completes reboot ENTER
*7465625*638*00000000*00000000#
NEXT ENTER
#7465625*638*00000000#
AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks...
network lock - inactive
subset lock - inactive
sp lock - inactive
cp lock - inactive
sim lock - inactive
activa lock - inactive
phone lock - inactive
auto network - inactive
auto subset lock - inactive
auto sp lock - inactive
auto cp lock - inactive

Jan 27, 2008 | Computers & Internet

1 Answer

Software


I don't know what utility you'd use....probably a firmware writer. You'd also need a USB cable.

Here is a link where you might be able to find that software:

http://en.soft4gsm.com/Unlock+Solutions/NS-Dongle/Firmware+&+Flash+Files/European+Flash+Files/S300/

Mike

Oct 29, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...