Question about Canon PIXMA iP4000 InkJet Photo Printer

Open Question

Ip 4000 printer won't turn on

Is there a ay to get ink cartridges out when power won't come on.

Posted by on

6 Suggested Answers

  • 619 Answers

SOURCE: power problem

Hi , check the power cord and check the power outlet , recock the breaker .try plug printer if nothing power in outlet look another outlet for testing.

Posted on Feb 03, 2008

SOURCE: canon pixma ip 1300

hi :)
i really need the driver
canon pixma IP1300

Posted on Sep 16, 2008

  • 1 Answer

SOURCE: I need a tool to reset my canon pixma iP4600 ink cartridges

I found the only tool I have seen at this url. It is a German company, but I was able to order the resetter from them with no problems. It has worked very well, but was a little expensive. part of the problem was that the US dollar and Euro were not at a favorable exchange rate when I ordered. I didn't get any answers to my emails to them, but when I used there site to order, it took about a week to get the device. It is very simple to use.

Posted on Jun 14, 2009

  • 37 Answers

SOURCE: Using refillable cartridges on epson 4000 low ink reafding on blk

click on the first link and follow the instructions. if this doesn't work, then try clicking on the secind link and method.

Posted on Jul 27, 2009

  • 66 Answers

SOURCE: Canon ip 1600 'color cartridge not recognized and/or device not r

Two things. 1. check your cabling to make sure your printer is properly connected. 2. clean your printer's inkwells.
If you send me an e-mail, I can send you a service manual for a Canon Pixma iP1500. Manual is the same for both printers. I can also send you the software service tool. I have both, as I have a Canon iP1500 printer (cheap ink cartridges).
My e-mail address is:
Best of luck, -Ric C.

Posted on Aug 03, 2010

  • 310 Answers

SOURCE: I was riffil ink cartridge

After refilling your ink, it may prompt your ink very low... but it is nature there is no problem and effect for that... don worry! All the Canon printer prompt like that.... thanks

Posted on Aug 28, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Epson 4000 will not see new ink cartridges

epson is crappy printers i know alot of people like it on repairing them i will never buy epson or brother ... anyways hopefully you have OEM/REAL epson cartridges.......otherwise it will give you an none or empty cartidges.

Jun 29, 2012 | Epson Stylus Pro 4000 InkJet Printer

1 Answer

Carriage for the ink cartridges is stuck, the carriage wont move to the middle so i can change the ink. i turned off the power & then turn it on , the carriage just move a little from the right and...

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:

1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Aug 30, 2011 | Lexmark X2600 InkJet Printer

2 Answers

My canon MX340 won't print, saying there is a printing error 5200. I tried unplugging the printer and turning it off, but it still won't work


I will advice you reset your canon printer, Follow this steps to reset your canon printer.

1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times.
6. turn off printer by button POWER. Power on later to see if that fix the problem.

Jul 11, 2011 | Canon PIXMA MX340 Wireless Office...

1 Answer

I had the waste ink full problem and fixed that but now it won't print black and when I try cleaning it reports error 5100 I know all cartridges are full.

Is it canon ip-?
If yes, Try to follow these instruction:
Steps to Fix Error 5100 In the Canon IP- Printer:

  1. Turn the printer off
  2. Remove the cartridge from the printer
  3. Use a cloth moistened with alcohol to clean the surface of the contact / connector terminal cartridge that touches the printer / could also use a pencil eraser
  4. Replace the second Cartridge
  5. Turn on the printer.
Thank you

Jun 07, 2011 | Printers & Copiers

1 Answer

My canon PIXMA iP 4000 does'nt write out the colours, only black.

Use the Canon software to check the ink-levels in the COLOUR cartridge. If empty, replace it.

Use the Canon software to run a few "print-head-cleaning" cycles, to unclog any ink-jets that are not spraying ink onto the paper.

Feb 22, 2011 | Canon PIXMA iP4000 InkJet Photo Printer

2 Answers

How to reset ink level canon iP 2772??

Download and run the ipTool to reset your ink level :

Features IP Tool software:

  • Showing all info on the printer such as ink level, ink counter number of cleaning, cartridge replacement and more.
  • Print test feature to test nozzle on the cartridge.
  • Cleaning and deep cleaning feature to clean head cartridge and cleaning the rollers.
  • Changing the delay value for drying.
  • Set the printer model manually.
  • Reading and reset EEPROM printer.
  • Reset counter and reset ink level on the color and black cartridges.
Ink Level - shows the level ink:
  • BK - black cartridge.
  • CY - Cyan cartridge.
  • MG - Magenta cartridge.
  • YL - Yellow cartridge.
  • WM - Waste ink counter status.
  • WP - "additional" waste ink counter status.
Port Name - displays the port where the printer installed.
Port S / N - shows the serial number of the printer port.
Power - shows the number of:
  • ON - inclusions printer.
  • OFF - to turn off the printer.
Cartridge Info - Displays information status of:
  • BK - black cartridge.
  • CL - colored cartridge.
Head Parking - displays the number of parking.
Head Cleaning - shows the number how many time the cartridge cleaned.
Head Deep Cleaning - displays the number of deep cleaning Printer cartridge.
Cartridge Replacement - shows the number of cartridge replacements:
BK - black cartridge.
CL - colored cartridge.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Dec 20, 2010 | Printers & Copiers

1 Answer

I have a damaged cartridge chip sensor in my Epson Pro 4000 printer, I have the field repair guide and new sensor, but can't find any info about replacing this sensor- how can I replace it?

Very old question but not a hard job. Watch this video. :
Or, in the field repair guide you can find the info to turn off the sensors. Google "disable ink sensor epson 4000", thats how I found it, I run all my off. DO NOT DO THIS unless you use the clear refill ink carts that let you see the ink level. NEVER let your printer head run dry.

Nov 10, 2010 | Epson Stylus Pro 4000 InkJet Printer

3 Answers

Ink absorber almost full

Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Hope this guide can help fix your problems

Extra download

Jul 20, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Canon ip4000 flashing 12 times

Hi there,

It sounds like the cartridge or one of the tanks may not be properly seated.
Pull out and then reinsert the ink tanks. Make sure they CLICK in firmly. Hold down the RESUME button for 5 seconds.

Helpful links:

Click here for the Canon iP4000 cartridge replacement page.

Click here for info on reseating tanks.

Click here for the correct order of the ink tanks

Hope this helps.

Jul 11, 2008 | Canon PIXMA iP1800 InkJet Photo Printer

9 Answers

The ink absorber is full for pixma 1880

This is the REAL working method of manually resetting Canon ip1880 - ip 1980.

1. Unplug the POWER cord.
2. Press & hold the power button.
3. Connect the power cord WHILE holding the power button.
4. Keep on holding the power button for about 30 seconds.
5. Release the power button. The printer should be turned off.
6. Turn the printer on and that's it!

NOTE: You have to do this every time you turn on your printer. Or you will get the waste pad full error.

Hope this helps.

Jan 15, 2008 | Printers & Copiers

Not finding what you are looking for?
Canon PIXMA iP4000 InkJet Photo Printer Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93738 Answers

old marine
old marine

Level 3 Expert

1293 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides