Question about Palm TX Handheld

1 Answer

Palm tx the thing went dead.  i plugged it back into my mac - but it still doesn't illuminate.  i've hardly used this thing - (it's certainly not abused) - so there is no reason why it should be suddenly powerless.  i have nothing but a BLACK screen and seemingly no juice - even while it's plugged in.  HELP!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers
Re: palm tx

Try removing the battery or doing a warm reset ie plug it in and pusg the reset button.

Posted on Jan 31, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Apperantly the battery went dead. How can I

you will need a number 5 torx screwdriver, remove the 4 screws in the back of the unit and then remove the back cover wich is now hold only by clips, be careful because the battery is glued to the back cover that give accsess to the battery! also you can check out this tutorial on youtube on how to take appart the TX!

Apr 06, 2010 | Palm TX Handheld

2 Answers

On Palm TX Hotsync Manager will not open

check whether the power supply is proper

Jun 21, 2008 | Palm TX Handheld

1 Answer

Bought brand new for nursing school never worked company that sold it to me went bankrupt is there a way to reformat or something to start on a clean slate beyond just a hard reset?

Normal 0 This is the link for a free palm chat service and it's the best thing I can offer you.. I have used this and it worked good for me. Here is a link to the free chat service. Scroll to the bottom of the page and you will see a Palm Chat. From there click on the link that says Chat Now and follow the online prompts. Best wishes...I hope this will help you.
Best of luck in your nursing studies. Our daughter is going to nursing school too.

Nov 11, 2009 | Palm TX Handheld

2 Answers

My Palm TX Handheld will not turn on, I have

It sounds like the battery might be dead. If I were you I would take advantage of the free chat that palm provides to their customers. I have used it in the past always with good results. I am including a link to that page. Best wishes.

Scroll down until you see this.....
Other support options from Palm Palm Forums - free, always available - go there now
Learn from fellow Palm customers, or answer others' questions
Palm Chat - free, quick and simple - chat now
Communicate easily, securely, and instantly with a Palm agent.
Repair Services Open Check your warranty and learn about your repair options.
--> --> Warranty This product is covered under a limited warranty for 1 year. Eligible in-warranty repairs are offered at no charge for one year from the date of original purchase. You may be responsible for shipping charges. The warranty does not cover damage resulting from certain events or conditions. Please review your warranty for more information.
--> 2. Troubleshoot Review our solutions to determine if you can fix your issue on your own.
Try Troubleshooter --> Repair --> In warranty repair: --> To arrange for in-warranty service on your device, please contact Palm:
--> --> Out of warranty repair: -->
If the damage to your device falls outside warranty coverage, or if your device is no longer covered under the limited warranty period, you can arrange for an out-of-warranty repair from Palm. --> Cost: $199 US ($249 CAN)
--> --> Check repair status: If you have already started a repair with Palm, use our online repair status check:

Oct 27, 2009 | Palm TX Handheld

1 Answer

My 5 yr old Palm Tx suddenly started trying to

I did a warm reset and it worked. Just hold the up key and reset!! good luck

Aug 29, 2009 | Palm TX Handheld

1 Answer

Palm TX Handheld

no other way but to do a hard reset then recreate a new profile or rename the back-up folder

Sep 06, 2008 | Palm TX Handheld

1 Answer

Palm TX is dead

give it aq reset its in the back there is a mall hole puch it with the stylet

rate me !!!

Aug 16, 2008 | Palm TX Handheld

1 Answer

Error on palm tx page requested cannot be displayed

You need to clear previous network settings and reconfigure again.

Jul 14, 2008 | Palm TX Handheld

1 Answer

Palm TX not powering up

Your Palm will auto-off after 30 seconds to 3 minutes of not using it, depending on the auto-off setting. If that's not it, you may have conflicting software installed. I had a lot of software installed on mine before and it got to where it wouldn't come on. I had to do a hard reset by holding the power button in while pressing the reset button until the screen comes on. This restores the device back to original state. You will have to reinstall all additional software that you want to add, but it will take care of the conflict. If that doesn't work, then the battery is probably no good, or the device is no longer functional. Hope this helps.

Mar 20, 2008 | Palm TX Handheld

2 Answers

Palm TX handheld turns automatically on and off.

If you tried a hard reset, and it is still happening... then it may be a hardware problem. Is it still under warranty? You may want to exchange it for a new unit.

Dec 16, 2007 | Palm TX Handheld

Not finding what you are looking for?
Palm TX Handheld Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Palm PDAs Experts


Level 2 Expert

166 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Are you a Palm PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides