Question about One For All URC-4041 Remote Control
Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.
if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
(For low price replacement remotes visit www.sparky-uk.com)
Posted on Jan 30, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 15, 2012 | One For All URC-7800 Remote Control
0154 0236 0463 0180 0282
0178 0019 0179 0177 0185
Sep 24, 2011 | One For All URC-4605 Remote Control
If your device does not respond to the remote control
after trying all codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
NOTE: Before performing a code search for a CD or DVD player
or a VCR, turn on the device and insert the required media.
For example, to search for a code for your TV
 On the remote control, press TV once
 Press and hold SET until the LED (red light)
blinks twice, then release SET
 Enter 9 - 9 - 1.The LED will blink twice
 Aim the remote control at the TV and
slowly alternate between pressing POWER
and TV. Stop when the TV turns off (after
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first
 To lock in the code, press and release SET.
The LED will blink twice
 To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key for
the device you are searching for
May 15, 2011 | One For All URC-4041 Remote Control
Feb 22, 2010 | One For All URC-3021 Remote Control
Aug 09, 2009 | One For All URC4110 Remote Control
Jan 26, 2008 | One For All URC-4041 Remote Control
Nov 17, 2007 | Televison & Video
1,111 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: