Question about Motorola Mobility RAZR V3

1 Answer

My Screen Is Blacked Out!!!

I use my phone A LOT and i had it out and made my brother mad and he threw a water bottle full of ice and it hit my phone and blacked out the front and back screen. my phone was all ready suffering from water damage. How much will it cost to get it fixed? Will they fix it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

They really will fix it but make sure to bring it on a certified motorola service center. where are you from anyway? search online the service centers nearest to your area. then you can call them first hand to prepare the necessary parts on ur phone. it'll probably cost a lot though. In the philippines, a keypad for example costs P450 already (in certified service center, that is in SM north cyberzone).

all the best!

Posted on Jan 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blacked out but can still hear sound


Hi Karlie,

I think its display must be replace before use.

regatds,
nuwan

Jan 20, 2014 | Apple For iPhone 4/8GB LCD Screen...

1 Answer

Ice maker doesn't work. It slowly died.


Take note how full the ice tray gets with water after it has dispenced. If water is low, defrost freezer and it will allow water in pipr to also thaw out. Fairly common problem. If water is full that is another problem. Normally to save a lot of time, the unit is replaced.

May 28, 2010 | Maytag Refrigerators

1 Answer

We have a Wolfgang Puck Bistro Collection (electric) Wine Chiller. We have lost the instructions and don't know if we should add ice or water or what. Can you help?


I have a copy of the manual.
Put the bottle in first, add "2 trays of ice cubes," (does anyone still use trays?), then fill cooler to the neck of the bottle with cold water. Turn on.

If you want the full manual, let me know, and I can scan it in.

Jan 01, 2010 | Juicers

1 Answer

RS21DABB- water dispenser will not dispense anymore. Mechanically intact but no flow! Rest of fridge/freezer perfect!


no water can be the early signs of the common issues with samsung rs21 models
what happens is the fridge cooler /defrost system goes faulty and freezers the water instead of chilling it , the best way to check is to take the 2 drawers out the bottom section of the fridge you will then be able to see the water bottle , if there's a lot of ice around the bottle then this would confirm a defrost issue , you can heat the bottle for 10 minutes or so with a hair dryer etc , if the water starts to work after this then you probably will have to call an engineer or fit the rs21 diy fridge repair kit

this video may help

Dec 17, 2009 | Cell Phones

2 Answers

SCREEN DOES NOT SHOW


case is, a circuit blew in the screen, phone needs to be replaced. My phone's screen blacked out and touching certain buttons makes it a brighter black lol... anyway... i had an expert look at it. She told me that my phone simply died and it would be a whole lot stressless for me to just get a new phone. It was either that or switch out most of the circutry(expensive).

Jan 12, 2008 | Cell Phones

1 Answer

GE PSS26 NGP Ice maker


Hi Vadim, You should have a steady light showing on the ice maker. If the lead is flashing, it's either a thermistor failure or ejector not home. The reasons why the ejector blades will not home is because of a magnet failure, control board failure or a stalled motor. The feeler arm could also be sticking. The control board contains 2 sensors that are activated by magnets. One magnet is attached to the end of the ejector arm to determine whether the ejector blades are at home. The other is located on the ice sensing arm, lets the control know whether the arm has reached a fully extended position. In a lot of these, I find the magnets broken. I think you can save yourself a lot of trouble by just replacing this ice-maker. Catriver.

Dec 28, 2007 | GE (PSS26MSRSS) Side by Side Refrigerator

10 Answers

Toner Light stays on after new cartridge installed


NEWER MODLES HAVE A CARTRIGE ESTIMATING PROGRAM THAT NEEDS RESET (you need to tell the printer that it has a new cartrige). SIMPLY....
1. OPEN THE FRONT COVER.
2. TURN OFF.
3. HOLD DOWN THE GO BUTTON AND TURN BACK ON.
4. ONCE ALL 3 LIGHTS ARE SOLID, LET GO OF THE BUTTON & PRESS IT 2 TIMES RIGHT AWAY.
5. ALL LIGHTS SHOULD GO SOLID AGAIN, WHEN THEY DO PRESS THE GO BUTTEN 5 TIMES IN A ROW.

THIS SHOULD RESET YOUR PRINTER AND LET IT KNOW IT HAS A NEW CARTRIGE (even if it doesn't)!

Aug 14, 2007 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Virgil Wolter

Level 1 Expert

29 Answers

vince

Level 3 Expert

1216 Answers

Rami Obeid

Level 1 Expert

16 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...