Put dvd in drive and nothing happens - Televison & Video

Try reseating the DVD drive.
Then go to My Computer to see if the DVD drive is shown.
If not then the DVD drive is faulty and needs to be replaced.

What do you mean by "nothing happens"?
Do you have a DVD with the software on it? Did you put the DVD in the drive and nothing happened? Is your DVD drive set to AutoPlay when a disk is put in it? If not, you can open the drive (open My Computer, then select the DVD drive, and find the setup.exe file, and double-click it).
If this is not the issue, perhaps you have an older version of the software. Usually you can still install older versions, and use the Update functionality to upgrade to a newer version online. If it's too old (like a Win 98 version or something), then you will just have to buy a new version.

If you have put a pin in the little hole next to the open button, and tried to right click your drive and eject that way, the motor may have burned out. Its not uncommon for this to happen. Overuse or abuse can cause this. You can get this fixed a few ways. Take it into a repair shop and have them replace the motor. Or get an external DVD/CD drive. On average they go for around $60 for a decent one.

this type of CDROM drive can not read the DVD disk you need to buy a DVD drive to read your DVD movies.

Confirm that the CD drive is not a CD-ROM dive and the CD you are trying to open is is not a DVD. CD-ROM drive wil not open a DVD ROM and in some cases will cause the system to stop responding if youtry to run it.

Your computer may not have a DVD drive, it's only a CD drive.

you need to replace the dvd drive, you dvd player is faulty, it happens a lot with laptops, mostly after about 3 years they go faulty and ether the cd reader or dvd reader stops working.

The triggers determining the slave was set to master with the CD rom drive as well...so I had two master drives...kind've stupid. Everything is now working properly!

update the driver for the dvd drive

Check your other post