Question about One For All URC-3021 Remote Control

2 Answers

Need code for remote

I can not find the codes for my one for all remote so I can reprogram the remote to my tv again

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: need code for remote

I lost the codes for my remote and need to program it to a citizen tv.

Posted on Feb 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers
Re: need code for remote

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
(For low price replacement remotes visit

Posted on Jan 30, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Antenna button not functioning on RCA300x universal remote

U have glitches in the reprograming back and forth.Take the battery out,about an hour.Reprograms the codes again,should work again.Don't reprograms the codes back and forth to many times or one times to many will kill the remote for good.U have 2 tvs,U should have 2 tvs remotes.

Jun 22, 2010 | RCA RCU300 Remote Control

1 Answer

Need code to reprogram oneforall remote for

To control a Magnavox TV with a One for All URC-3021, follow these steps:

1) Turn on your TV.

2) On the remote, press the TV key once.

3) Press and hold SET until the LED blinks twice, then release SET.

4) Enter the first four-digit code from the following list:

0054, 0706, 0030, 1454, 1254

The LED will blink twice.
If it does not blink twice, go back to step 2 and try the same code again.

5) Aim the remote at the TV and press POWER.
The device should turn off.
If it does not turn off, repeat steps 2 through 5 with the next code in the list.

I hope that helps.

Nov 27, 2009 | One For All URC-3021 Remote Control

1 Answer

I need the code for URC4220 for Zenith tv

Thanks for your prompt responds back to me but I did get the problem solved. I continue to search the site untile I came across the manual for remote, again I thank you

Jun 29, 2009 | One For All URC4220 Remote Control

2 Answers

Code for remote

need a code for a rca tv for my remote

Dec 07, 2008 | Philips Magnavox Learning Universal Remote

2 Answers

TV Remote Control Code

i need the codes for this remote.. the tv is a symphonic.. the remote is a oneforall

Nov 11, 2008 | One For All URC-3021 Remote Control

1 Answer

Reprograming my universal remote


For Sanyo TV you can use the code "0154" Also you can obtain the User's Manual with code list from the link below

Sep 01, 2008 | One For All URC-3021 Remote Control

1 Answer

Bright Star Br100P-D remote TV Panasonic

the remote is a hotel remote. Bright Star BR100P-D For a thomson tv. I just need to know how to reprogram the remote.

Jul 14, 2008 | Remote Controls

2 Answers

Need to reprogram remote

Trying to fine GE Remote for Model RM 24908 need the Codes to program the TV

Feb 19, 2008 | GE RM24906 Remote Control

2 Answers

Volume and mute buttons suddenly stopped working

Try changing the batteries. Most times the "tivo" buttons will work but the "tv" buttons will stop working when the batteries are low.

If you have done that, go back into settings and program the remote again for your tv, then give it a shot.

Nov 05, 2007 | Tivo DirectTV Remote Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides