Question about Sony Cyber-Shot DSC-P92 Digital Camera
The LCD screen doesn't display anything but weird lines on a black screen and I can't take pictures with the camera. Sony DSC-P92
With this camera, if you take the battery out and then hold the power button down for 30 seconds, it will reset the the camera to factory specs. If you still have a problem after that, it is probably the CCD sensor which Sony will repair at no charge. Call that 800-222-7669 number. Sony will go through that process with you and solve the problem with you...free.
Posted on Jun 28, 2008
Tips for a great answer:
The display being white can be due to failure
of the LCD or the CCD which is the optical sensor of the camera. So to confirm
check the older picture to be seen on the display. Confirm this by checking the
card on your PC. If the images/picture is seen to be of good quality, then the
LCD can be faulty, fault on the linking cable or the control board.
However if the older images are seen well
then the LCD is working correctly and the fault can be failure of the CCD-
charge coupled device in the camera. If you have accidently exposed the camera
directly to high intensity light / sunlight, then it is possible that it is
damaged. Remove the battery and keep the camera aside to reset and try as a
last resort. Get estimate before you decide. It will be good to have it checked
at the authorised service as you do not have to run around for spares.
Please click on the link for tips to replace
Dec 14, 2011 | Nikon COOLPIX L20 Digital Camera
Dec 18, 2009 | Canon PowerShot SD1100 IS Digital Camera
Jul 31, 2008 | HP Photosmart R607 Digital Camera
Nov 25, 2007 | Nikon Coolpix 5700 Digital Camera
Aug 30, 2005 | Pentax Optio 330GS Digital Camera
Nov 17, 2012 | Sony Cyber-Shot DSC-P92 Digital Camera
131 people viewed this question
Usually answered in minutes!