Question about One For All URC-4021 Remote Control

1 Answer

Code I need a code to program Magnavox Tv With DVD and VCR combo in it

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
(For low price replacement remotes visit

Posted on Jan 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I need code for philip s remote for a sayno ty

Philips rca universal remote codes sayno vcr dvd combo ... > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ... > Computers

Dec 21, 2015 | Philips Televison & Video

2 Answers

I need A DirecTV Remote Code for the Magnavox DV200MW8 DVD Player VCR Combo

Magnavox is the problem. You won't find a code for that :( 10 years of trying and experience!

Feb 23, 2014 | Magnavox DV200MW8 DVD Player VCR Combo

1 Answer

I need the codes for a magnavox tv. dvd combo.

Codes for Philips Magnavox TV/DVD combo are: 0456 [0189 0458]
Where the code is listed as [**** ****]the first is for the TV and the second is for the DVD. Otherwise just the one code operates both the TV and the DVD.
Code for Magnavox TV/DVD combo is: 0456
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Ok. Thanks for using Fixya.

Apr 06, 2011 | Philips Magnavox 27MS343S 27" TV

2 Answers

Need code for magnavox tv urc-4021boo

Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

1 Answer

I have a one for all remote urc-4021800 and I am trying to program my Magnavox tv I need the code

hi!, i have here a couple of codes for your magnavox tv, 1004, 1007, 1018, 1047, 1053, 1056, 1057, 1059, 1060, 1061, 1083, 1103, 1110, 1147, 1228, 1260, 1300, 1301, 1302, 1321, 1326, 1339, 1366, 1384, 1387,
this is for magnavox hdtv
1329, 1358, 1372, 1414
this is for the magnavox tv/dvd/vcr combo
1339, 2241, 3183,
this is for the tv/vcr combo
1302, 3154, 1321, 3181, 1300, 3152, 1301, 3153,
hope this helps!!! goodluck!!!

Jun 09, 2010 | Philips Magnavox 27MS343S 27" TV

2 Answers

Is there a remote control code for model zv427mg9?

For my direct tv remote, 20675 worked for me :) magnavox zv427mg9 combo vcr, dvd

Sep 27, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

2 Answers

I need codes for univ.vcr.dvd.combo(Magnavox) Please

0456 [0914 0286] [0969 0286] the codes in the boxes are as follows the first is for dvd the second is vcr

Feb 18, 2009 | Philips Magnavox Learning Universal Remote

6 Answers

Remote control code for magnavox dvd/vcr combo

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
One For All URC-4021 Remote Control Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74999 Answers

Cindy Wells

Level 3 Expert

5300 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides