Question about Optoma EP716 Multimedia Projector
My Optoma EP 738 data projector will not turn on. I hit the power button and there is no response.
Also make sure the bulb replacement cover is on, cause there is a little switch that cuts power if the cover is off.
Posted on Sep 21, 2008
You can test the power source if you are getting any power input from the power cord itself. Plug in your power cord and use an eletronic meter on the other end to see if you are getting the proper voltage (110/120) reading. If not, then the power cable is bad in itself. IF you are getting power from your cord, it could also be a fuse inside the Optoma and/or where the power plug on the Optoma meets the actual power source is out of alignment or may also be not making the proper contact to the main circuit board on the Optoma. Hope it helps....JGUAM
Posted on Apr 05, 2008
Tips for a great answer:
Mar 15, 2015 | Optoma Multimedia Projectors
May 23, 2014 | Optoma MovieTime DV10 DLP Projector
Aug 04, 2011 | Optoma EP1690 DLP Projector
Jun 05, 2011 | Optoma EP747 Multimedia Projector
Jun 12, 2008 | Optoma EP719 XGA DLP PROJECTOR 2000L...
677 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: