Question about Konica Minolta magicolor 2300DL Laser Printer

1 Answer

Minolta 2300DL ghosting

Have a 2300DL that has been stored in an area that has experienced freezing Used it for the first time today (temperature in the area was about 48 degrees) printed black by itself OK but when printing a multicolor print experienced ghosting with the black only. The faint black prints occur about 2 1/2 inches exactly below the original black print which is part of a multicolor print. Will bring the printer inside the office in the hope that the low temperature has caused the problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Minolta 2300DL ghosting


I just had the same problem with my 5430DL. It was a bad toner cartridge. The bad cartridge is at 73% full, and had not been a problem until recently. I had been troubleshooting and finally remembered that I had the old cartridge with toner still left. I swapped them out and no more ghosts. Swapped back and the ghosts came back. I have ordered another new toner cartridge and fully expect the problem to be resolved.

Posted on Feb 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Download for Windows XP Konica Minolta Magicolor 2300DL

if you need any driver of konica minolta printers please visit this link,

Sep 19, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Why won't my minolta 2300DL print on any kind of vellum? So strange.

well..some printers can't grab that slick of a paper medium..let me show you an old trick we used to use

May 27, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

I asked my Konica Minolta 2300dl to print a test page and now it won't stop. Even after cancelling all print jobs.

give a single command in one time, if your computer is hanging then wait for a while, then give can be a problem with computer.

May 15, 2010 | Konica Minolta magicolor 2300DL Laser...

2 Answers

Minolta 2300 dl service manual

The solution for this issue has to do with the paper used. I experienced the same issue and traded out the bargain paper for quality Xerox paper. The bargain paper is just too thin and is causing the sensors inside to misread and miss-feed into the various rollers and devices inside the printer. If you can afford a color laser then I guess they figure you can afford the premium paper. The Xerox paper I'm using is 24lb found at BJ's wholesale here in the South East US, though other quality papers will work as well.

Oct 19, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Konica Minolta 2300 DL

Just sent you the manual.



Oct 02, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Magicolor 2300dl ghosting and smear - black only

if only black does that, then it can be black toner, but the best way to find out, print something and when printer starts to take paper open front door, remove waste toner box and take out pc drum and transfer belt and check the printed page from there, if it seems ok, print nex page and open door when page comes out from fusin unit, if quality goes bad before fusing unit, it may lead to 2'nd transfer roller / pc drum and transfer belt quality was ok / if after FU then you have a problem in fusing unit.

Apr 01, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

MagiColor 2300DL Printing Wtih Vista over Wireless Network

I am using Vista 64 and a 2300DL in the same manner as abertola003. I downloaded the Latest driver from Konica Website and everything is working well.
the driver is named Konica-Minolta 2300DL (unidrv)

Apr 01, 2008 | Konica Minolta magicolor 2300DL Laser...

2 Answers

Konica Minolta 2300DL

Yes! you can find toner density settings in your drivers page from control panel -> printers and faxes -> your printer -> properties

Feb 09, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Poor Quality Here is the link to FAQ's for your product. Good Luck. Tim

Feb 28, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2300DL Laser Printer Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides