Question about Blenders
This happened to me recently. Go to this site and order it directly from Breville. They were very fast and customer service very helpful.
Posted on Jan 21, 2009
I carved off the rubber with a knife; inserted a flathead screwdriver throught the slot in the bottom to hold the gear in place; using pliers I unscrewed (COUNTERCLOCKWISE) the rubber gear.
Posted on Mar 28, 2009
Look at the underside of the blade shaft. The metal wing nut on the end of the shaft secures the blade assembly to cream coloured plastic blade base. The wing nut also transmits the drive from the rubber coupling on your blender to the blade shaft. The wing nut has a LEFT HAND thread.
The left hand thread ensures the blade assembly does not unscrew during normal blender use.
Firstly disassemble the blender blade assembly. Place a folded tea towel over the blades and hold the blades firmly. If you do not use a tea towel you may cut yourself.
Grip the wing nut with your other hand and unscrew it CLOCKWISE.
Remove the wing nut. You can now remove the blade from the plastic base.
Put the blade assembly in the new jug and offer up the plastic base from under the jug so that the blade shaft protudes enough for you to install the wing nut.
Screw the wing nut ANTI-CLOCKWISE to secure the blades to the plastic base.
Do not over tighten the wing nut; you may have to replace your jug again at some point.
Posted on Jul 21, 2009
Tips for a great answer:
Mar 08, 2016 | Miallegro 9080 Mitutto 450-Watt Immersion...
Feb 13, 2016 | Blenders
Nov 02, 2014 | Toastmaster 1135 Work Top Blender
Feb 03, 2012 | Blenders
Mar 16, 2011 | Back to Basics Smoothie Elite Work Top...
Mar 03, 2011 | Cuisinart BFP-10 7-Speed Blender
May 16, 2010 | Wolfgang Puck BIBC1030 Blender
Mar 28, 2009 | Back to Basics Blender Solution 5500...
Mar 23, 2009 | Blenders
460 people viewed this question
Usually answered in minutes!