At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Where is the turn signal relay located in my 1999...
The hazard button is the relay for both the turn signals and the hazards. you have to remove the trim panel that the hazard switch and radio are in pull it out of the back of that panel
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn signal switch is probably the problem ,but without testing that is just a guess. Do know i replaced a few on grand am's . What relay ???? There is no relay in the fuse box for the turn signals . Your vehicle has turn / hazard flasher module .
Turn Signal Lamps
The TURN-B/U fuse and the STOP/HAZ fuse in the IP fuse block, supplies battery positive voltage to the flasher module. The turn signal lamps may only be activated with the ignition switch in the ON position. When the turn signal switch is placed in either the left or right position, current flow is from the flasher module's output to the turn signal switch assembly. The flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators.
Located under the driver side of the dash above the brake pedal ,on a metal bracket .
Turn Signal/Hazard Flasher Module
On the dash harness near the steering column
First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.
ON THIS YEAR 2 THINGS ARE USUALLY THE PROBLEM. THE TURN SIGNAL SWITCH OR THE HAZARD SWITCH. IT DOESNT HAVE A FLASHER. THE FLASHER IS INTEGRATED IN THE HAZARD SWITCH. ITS ABOUT 20 BUCKS FROM THE DEALER. THE TURN SIGNAL SWITCH HAS TO BE REPLACED AS AN ASSEMBLY. THE COLUMN COVERS HAVE TO COME OFF AND THE WHOLE ASSEMBLY NEEDS TO BE REPLACED
your hazard relay is probably bad. Its located on the back of the hazard button. Pull off the trim that goes around the radio and you will be able to remove the relay
you have to find it first not sure where it is located more than likely under dash is put your head into another firebird and turn on indicators should locate it by sound its just a plug in
had the same problem as you. I replaced the relay twice before it worked right. Just to test if it is the relay what I did was when the turn signal quit working I pushed the hazard button a few times then the turn signal started working again. Good Luck hope this helped
the relay for the turn signals and hazards is located behind the the hazard button and it 's bad. Pull off the trim that covers the heat controls and radio to get to it.
Typically there is a seperate relay for both the turn signal and hazard lights; I expect the hazard relay has failed. These may easily purchased ( $5.00 or so ) and replaced. The attendent at the auto parts store should be able to give you placement of the relay location.
I hope this may have helped,
Tom
the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem
×