Question about Haier 42EP24S 42 in. EDTV-Ready Plasma Television

4 Answers

My Haier 42ep24s plasma screen has gone black. I know Sears knows what is wrong but thye won't fix it without warranty and I don't have one. Can I fix i myself if one of you repair guys ells me how?

Posted by on

  • 3 more comments 
  • verruch Mar 04, 2008

    same thing

  • Anonymous Mar 10, 2008

    I have sound but black screen. Unplugged it overnite , still didn/t come back on. Been told that the "chip" is burned out can't even read the chip number. However I didn't see anything burned on the board. Help!?

  • stephanie16 Jun 08, 2008

    my plasma screen TV has a black screen when I try to turn it on. It has sound but a blank screen I tried using the remote NOTHING will work. I got it from out of the country, is there any way to fix this problem myself ? ?

  • joseph20186 Aug 20, 2008

    has sound no picture just went out of warranty

  • tberry26 Oct 16, 2008

    this is Tommy from Cleveland oh. i brought a 42 haier plasma model 42hd828bat and the same thing sound no picture , It been out for a month now and i hate even looking at in my house, i have no warrty.i am willing to try any
    thing to get my tv back! am going to try ctf18000 method to see if it works


×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE THE 42 INCH PLASMA HAIER MODEL #42EP24S
THIS BRAND IS A PIECE OF JUNK! I BOUGHT THIS A YEAR AGO AT SEARS AND IT WENT BLACK! NOTHING COULD TURN IT ON, SO SEARS CAME OUT TO FIX IT! THEY HAD TO ORDER A WHOLE NEW MOTHER BOARD FOR IT! NOW IT'S BEEN LITTLE OVER A YEAR AND I HAVE LINES GOING THROUGH THE PICTURE! NO WARRANTY! I GIVE UP! I WILL NEVER BUY A CHEAP BRAND LIKE THIS ONE AGAIN! NOTHING BUT HEADACHES! GONNA STICK WITH A SHARP OR PANASONIC OR SONY! TERRIBLE T.V. TO BUY!

Posted on Aug 11, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 62 Answers

Part; TV-3940-01 is the part needed - it's an upgrade kit that consist of 3 boards. control board - y and x sustain boards.

Posted on Mar 29, 2008

Ad

I had the same problem last year and it took Sears two months to fix. It ended up being the power supply. The TV has a dual power supply, one for the video and one for the audio. This must be a problem that occurs frequently. Hope this helps!

Posted on Mar 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

His is what I have found out so far the YSUS PC boardMy Haier 42ep24s plasma screen has gone black. - 1.gif is your problem
Part number 6871QYH045B I have a call into Haier to see if I can get this
I did a search on the web and found a couple but none in the US
so if someone can traslate these sites and help out

http://www.soel.com/view/catalogo/f...278763_&lang=en

It also seems the LG1.gif uses the same board

http://monitor.net****/forum/topic138985-0.html

Posted on Jan 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier Plasma Tv


If this is the 42EP24S TV the repair is quite easy - remove the back cover and replace 3 boards and an EEPROM, replace the cover and then program the set via the remote control.

If you can get the repair kit (TV-3940-01) from SEARS, get it.

You can get a kit (6871VSNB03E) from Rich-Tech for $198 plus shipping. It does not have the EEPROM though.

Nov 08, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Black screen


Had the same problem. Purchased Haier 42" model 42EP24S from Sears and it broke in 1 1/2 years. Couldn't find anyone to fix it so I ordered part Service Kit: TV-3940-01 from www.searspartsdirect.com the cost was $150.00. If your warranty is up and you're okay with doing your own work. :-)

Replaced 3 boards (instruction included) and my tv is back in action.

May 09, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier Plasma


Had the same problem. Purchased Haier 42" model 42EP24S from Sears and it broke in 1 1/2 years. Couldn't find anyone to fix it so I ordered part Service Kit: TV-3940-01 from www.searspartsdirect.com the cost was $150.00. If your warranty is up and you're okay with doing your own work. :-)

Replaced 3 boards (instruction included) and my tv is back in action.

May 05, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Black Screen with Audio


Sears knows of this problem - the key is to convince them to come out and replace the three circuit boards for free - argue that they should have recalled or fix the MONITORS proactively and that this isn't the service level that Sears is known for. Mine was out of warranty, but they still came out and ordered the boards. Also, make sure when you buy a new Plasma, that you buy a Television, not a Monitor to avoid the frustations about tuners.

You can order the parts and plug them in yourself. I did this, since it takes weeks to get the Sears guy to come back and do it. It was simple, but isn't recommended unless you can't wait to have your tv back. Sears sends parts by mail directly to your home...

Apr 28, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Your Haier fix kit


The Haier fix kit is 3 boards to replace the 3 boards in your plasma. So the only way to get it done is to order from Haier/Sears. Sears knows this! Make them come to your home, it is a warranty issue.

Is the tv black screen with sound? That's usually the problem. The Sears service rep will come out, order the upgrade kit, the kit is mailed to your home, then you notify Sears and they return and install the 3 boards. You can do this yourself when the boards arrive and skip Sears, but only if your comfortable removing the back of the plasma (about 25 screws) and replacing circuit boards.

Apr 15, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Black screen on Haier 42ep24s plasme tv


Make sure that you haven't pressed input by mistake i.e going onto scart or pc1.gif input press TV on the remote and try this.
also check that the scart cable is fully inserted into the TV as well as the digi box or VCR or what ever.
The control board part number is TV-5210-57 and retails for $214.45 plus shipping and tax. To order please contact us at 1-800-313-8495

Jan 21, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier 42EP24S Plasma Screen went blank


Gastech, trash the TV...Trust me. It's not worth it. Sears fixed mine too, and it never worked. Sears and Haier are keenly aware that they have a rotten product, and are not willing to support it. Your best bet is to not dump anymore money into the TV and buy either a Vizio, Sony, Samsung, etc...It's worth it. Do yourself a favor and don't buy from Sears or Haier again...Tell your friends, too.

Nov 12, 2007 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

2 Answers

Haier Plasma TV problem


My experience with a Haier Plasma 42EP24S is that they have weak software chip that goes bad and can cause a number of symptoms from picture with no sound, will not recognize video inputs, or my current problem tv turns on and off irratically.  This is the second time i have replace this chip, which is the socketed chip on the vga/component/dvi input circuit card.  Last time i had this problem i ended up fixing it myself because sears took over 3 weeks and still could not figure out the problem.  I am working on obtaining this chip, probally get about a dozen so if anyone thinks this may fix there problem as well i my have some for sale.  michael@malobicky.com of Malobicky Digital Systems.

Oct 07, 2007 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier 42ep24s 42 in


You need the upgrade kit - make Sears come out and order it for you - they know all about it, claim that the monitor should have been recalled. Mine was out of warranty, however I convinced them to fix the TV.

May 25, 2007 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

27 Answers

Black Screen - Haier 42EP24S 42 in. EDTV-Ready Plasma Television


Mine did the same thing, I called Haier and reprted the problem. there is some kind of kit to remedy the problem where 3 boards are replaced. The repair performed by Sears service center was in home and cost me nothing for parts or a sevice call. Sadly now the monitor is working agin but with some interference of some kind. I called Sears service and they are coming back.

Sep 28, 2006 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Haier 42EP24S 42 in. EDTV-Ready Plasma Television Logo

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

CoppellTVRepair.com

Level 3 Expert

777 Answers

Are you a Haier Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...