Question about Microsoft LifeCam NX-6000 Webcam

1 Answer

Installation microsoft lifecam nx-6000

The installation appears to install properly. even the setup wizzard for the audio and video; however when exiting setup and trying to use the videocam, device is unknow. skye does not recognize the device either. result, after successful install device does not work. i've been unable to locate my original install instructions nor can i find the manual online.

Posted by on

  • Anonymous Mar 17, 2008

    i have the same problem with mine, i don't know is because my compu has windows vista on it.

  • MSprob Apr 16, 2008

    same problem with NX6000 but with XP professional.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your familyand friends so they have there computer setup properly.
Web Camera’s have to besetup on the program they are to be used with. Just installing the camera on your computer does not set it up tobroadcast on messengers or Skype.

Each program has Options that have to be setup in order forthe Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able tosee and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hopethis helps. Bud

Posted on Mar 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lifecam 600 wont install


Checkout Microsoft support - you can also download the software from here
http://support.microsoft.com/search/default.aspx?query=lifecam+vx-6000+driver&catalog=LCID%3D2057&mode=r

I could not see a lifecam 600 only Lifecam NX-6000 and Lifecam VX-6000

Aug 31, 2009 | Microsoft LifeCam VX-6000 Webcam

1 Answer

Lifecam nx-6000 not working with aim! aim is saying i need the right plugin but i cannot find any pluggin that matches this issue HELP


Normal 0 See section D. AIM AOL Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
D. (AIM AOL) Messenger http://dashboard.aim.com/aim
  1. On the VIM sign-in window click on Edit.
  2. Then click on Settings Enhanced IM.
  3. Next click on Enhanced IM.
  4. Then click on Audio Video.
  5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone Speaker
Camera The audio and camera should function now.
Additional info to use with VIM settings.
Adjust Your Audio and Video Settings: In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.

Notes:
  • The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
  • images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

May 08, 2009 | Microsoft LifeCam NX-6000 Webcam

2 Answers

Lifecam NX-6000 with Skype


When Skype uses the Lifecam, an icon named "Microsoft LifeCam Dashboard"(it looks like a round blue button) shows up in the System Tray (lower right corner of the desktop). Click the icon to pop up the dashboard.

Feb 24, 2009 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Microsoft Lifecam NX-6000 not giving me visual on Skype


Normal 0 See section B. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

Hope this helps. Bud

Feb 10, 2009 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Not working with AIM


Try using Skype , its free and works great. Here is info on Audio & Video setup in Skype.

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Dec 23, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Installation du CD lifecam 1.2 pour NX-6000 sous Window vista


Normal 0 To get the latest Microsoft Web Camera drivers, go to this site

http://www.microsoft.com/hardware/download/download.aspx?category=ICE

then select the necessary items as listed below, such as
  1. Select type of product. (Web cam)
  2. Select your product (camera model).
  3. Select your operating system. (XP, Vista etc.)
  4. Select your operating system langusge. (United States English)
Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud





Dec 12, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Microsoft live webcam shows error msg


I have a Work-A-Round so that the end result will provide both sound and
Video using the LifeCam NX-6000 with Windows Live on a
Windows Vista ULtimate 64 bit system, please post your system if
this solution works for you.

I guessed that the error messages, the BLUE SCREEN OF DEATH, and
a long list of conflicts that I discovered with this camera shown that
the sound was conflicting with the video.

Overview
I used manycam for the video and I configured Windows Live to handle sound.
I assume that you can get it to work as long as you split the video and sound
on two different programs.

What I did
I installed the vista driver
http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=Webcams&name=NX6000&os=WVista_32&lang=en
I installed windows live 8.1 (I did configure until after ManyCams)
http://www.microsoft.com/downloads/details.aspx?FamilyID=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
I installed ManyCams
ManyCam Virtual Webcam 2.3.21
http://www.download.com/ManyCam-Virtual-Webcam/3000-2348_4-10593500.html

Configuration
I started ManyCams and configured it to (optionally start on boot) and to
USE LIFECAM NX-6000 as the source.
I then started Windows 8.1 Start > Tools > Audio and Video setup
and configured it to use my
(1) speakers for output sound (Realtek HD Audio) [next]
(2) Microphone Microsoft Lifecam NX-6000 [next]
(3) ManyCam Virtual Webcam [finish]

Reboot, start ManyCam and then start Windows live.

If your still having issues, you may try to disable this service and try again
using the following instructions.
start -> run -> services.msc
then go to Messenger Sharing Folders USN Journal Reader service
click on proprieties and disable it

Ok, thats is what I did and I truly hope that it helps you.

Nov 18, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Lifecam nx-6000 interference


this the spec from microsoft for the nx-6000
it is not for 64-bit machine. it is fir 32-bits machine, color depth is 16.

Requires a PC that meets the requirements for and has installed one of these operating systems: • Microsoft Windows Vista or Windows XP with Service Pack 2 • Intel Pentium® III 700 MHz (Intel Pentium 4 2.4 GHz recommended) • 256 MB RAM (256 MB RAM recommended) • 300-700 MB hard drive space • Display adapter capable of 16-bit color depth or higher • 2 MB or higher video memory • Windows-compatible speakers or headphones • USB 1.1 (USB 2.0 recommended). USB port 2.0 required for 1.3 MP and above video capture resolution. System without USB 2.0 may achieve 800 x 600 pixel resolution • CD-ROM drive • Broadband internet access required; access fees may apply • Microsoft LifeCam software, version 1.3 Internet functions (post to Windows Live™ Spaces, send in e-mail, video calls), also require: Internet Explorer 6/7 browser software required for installation; 25 MB hard drive space typically required (users can maintain other default Web browsers after installation) The Microsoft LifeCam NX-6000 has basic Video & Audio Functionality with Windows Live Messenger, AOL® Instant Messenger™, Yahoo!® Messenger, Skype, and Microsoft Office Communicator

hope that helps!



please do no tforeget to rate this!!!!!!!!!!! thanks

Oct 14, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Lifecam not working under vista


nx-6000 is for windows 32-bits machine. if you have installed on a 64-bits machine, it will have problem running.
this is microsft first try to breaking into video, you know how that is. (bugs)

Jul 20, 2008 | Microsoft LifeCam NX-6000 Webcam

1 Answer

Fuzzy picture


1.check cam is jammed
2.check whether the drivers are installed properly
3.check the USB adapter cable
4.Remove cam .plug and install proper driver.
5.Check Video settings to default values
6. Else camera-video signal processing circuit might be damaged
thank you !

Nov 30, 2007 | Microsoft LifeCam NX-6000 Webcam

Not finding what you are looking for?
Microsoft LifeCam NX-6000 Webcam Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...